High-entropy alloys (HEAs) are materials that consist of equimolar or near-equimolar multiple principal components but tend to form single phases, which is a new research topic in the field of metallurgy, have attracted extensive attention in the past decade. The HEAs families contain the face-centered-cubic (fcc), body-centered-cubic (bcc), and hexagonal-close-packed (hcp)-structured HEAs. On one hand, mechanical properties, e.g. hardness, strength, ductility, fatigue, and elastic moduli, are essential for practical applications of HEAs. Scientists have explored in this direction since the advent of HEAs. On the other hand, the pursuit of high strength and good plasticity is the critical research issue of materials. Hence, strengthening of HEAs is a crucial issue. Recently, many articles are focusing on the strengthening strategies of HEAs[1-14]. In this chapter, we reviewed the recent work on the room-temperature elastic properties and mechanical behavior of HEAs, including the mechanisms behind the plastic deformation of HEAs at both low and high temperatures. Furthermore, the present work examined the strengthening strategies of HEAs, e.g. strain hardening, grain-boundary strengthening, solid-solution strengthening, and particle strengthening. The fatigue, creep, and fracture properties were briefly introduced. Lastly, the future scientific issues and challenges of HEAs were discussed.
Research of Mechanical Properties of Ni-Ti-Nb Alloyson Low Temperature and Restriction Behavior
对经过冷拉、非真空热处理和真空热处理的Ni-Ti-Nb合金进行了低温力学性能测试，并对Ni 47 Ti44 Nb 9合金进行了限制回复和非限制回复的力学性能对比，分析了它们之间的力学性能变化规律。试验表明，真空热处理后的合金力学性能优于其它两种合金（非真空热处理+冷拉），限制回复合金的应力曲线没有明显的屈服带，且限制回复合金的应力高于非限制回复合金，而限制回复合金的应力低于非限制回复合金的应力。
Magnetic properties of amorphous Co$_x$Nb$_{100-x}$ alloys produced by mechanical alloying
从元素粉末开始通过机械合金化制备三种非晶Co $_x$ Nb $_{100-x}$合金，Co $_{25}$ Nb $_{75}$、Co $_{57}$ Nb $_{43}$和Co $_{80}$ Nb $_{20}$。用交变梯度磁力仪（AGFM）测定了它们的磁性能，并由磁滞回线得到了它们的剩磁、饱和磁场和矫顽磁场。合金具有相对高的饱和磁场，其随着成分变得富含Co而降低。矫顽力和回复磁化强度在57%at.Co附近达到最佳值，使得{ \em a}-Co $_{57}$ Nb $_{43}$成为三种合金中最硬的磁性材料。进一步添加Co产生软合金。
Investigation on Vibrational, Optical and Structural Properties of an Amorphous Se$_{0.80}$S$_{0.20}$ Alloy Produced by Mechanical Alloying
用Raman光谱、X射线衍射、扩展X射线吸收精细结构（EXAFS）和光学吸收光谱研究了机械合金化法制备的非晶态Se $_{0.80}$ S $_{0.20}$合金，并对其总结构因子和EXAFS数据进行了反向蒙特卡罗模拟。它的振动模式，光学间隙和平均原子间距离和平均配位数的结构特性进行了测定和比较，发现为非晶硒$_{0.90}$ S $_{0.10}$合金。结果表明，配位数，原子间距离和间隙能量依赖于硫浓度。
The combined effect of ultrasonic vibration (UT) and applied pressure (P) on microstructure and mechanical properties of Al-5.0Cu-0.6Mn-0.6Fe alloy were investigated. The best tensile properties produced by P+UT processing are UTS: 268MPa, YS: 192MPa, E.L.: 17.1%, respectively, which increasing by 64%, 59% and 307%, respectively, compare to the Non-treated alloy.
The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by the optical microscope. Dynamic mechanical properties (storage modulus, loss modulus, and damping capacity) were measured by the dynamic mechanical analyzer (DMA). Microstructure showed coarser and angular eutectic Si particles with larger α-Al dendrites in the non-superheated A357 alloy. In contrast, finer and rounded eutectic Si particles together with smaller and preferred oriented α-Al dendrites have been observed in…
We report on the discovery of a high-entropy alloy with a hexagonal crystal structure. Equiatomic samples in the alloy system Ho-Dy-Y-Gd-Tb were found to solidify as homogeneous single-phase high-entropy alloys. The results of our electron diffraction investigations and high-resolution scanning transmission electron microscopy are consistent with a Mg-type hexagonal structure. The possibility of hexagonal high-entropy alloys in other alloy systems is discussed.
Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys demonstration of superior properties, such as high strength, creep resistance, high ductility, and fracture toughness, is not sufficient to secure its use in widespread application. Still, a good model is needed, to take measurable alloy properties, such as microstructure and chemical composition, and forecast how the alloy will perform in specified mechanical deform…
One of the main drawbacks of the powder metallurgy route for High-Entropy Alloys (HEAs) is the unavailability of fully pre-alloyed powders in the market. Using commodity powders (commercial Ni, Fe and Co base fully pre-alloyed powders, fully available in large quantities and at competitive prices) to produce HEAs presents a completely new and competitive scenario for obtaining viable alloys for high-performance applications.
Recent advances in microelectromechanical systems often require multifunctional materials, which are designed so as to optimize more than one property. Using density functional theory calculations for alloyed nitride systems, we illustrate how co-alloying a piezoelectric material (AlN) with different nitrides helps tune both its piezoelectric and mechanical properties simultaneously. Wurtzite AlN-YN alloys display increased piezoelectric response with YN concentration, accompanied by mechanical softening along the crystallographic c direction. Both effects increase the electromechanical coupli…
Investigation on Anharmonicity, Vibrational Anisotropy and Thermal Expansion of an Amorphous Ni$_{46}$Ti$_{54}$ Alloy Produced by Mechanical Alloying using Extended X-ray Absorption Fine Structure
提出了一种利用基于累积膨胀的扩展X射线吸收精细结构（EXAFS）分析得到的平行和垂直于原子间键的相关均方相对位移（MSRD）研究非谐性、振动各向异性和热膨胀的方法，并将其应用于机械合金化制备的非晶态Ni $_{46}$ Ti $_{54}$合金。通过在不同温度下对Ni和Ti K边的EXAFS测量，获得了$\text{MSRD}_\parallel$、$\text{MSRD}_\perp$和实分布函数$\varrho_{ij}(r,T)$的累积量$C_1^*$、$C_2^*$和$C_3^*$的热行为，以及与平行和垂直运动有关的爱因斯坦温度和频率，提供了关于原子间势的非谐性的信息。振动各向异性以及垂直运动对总无序和热膨胀的贡献。
EXAFS, XRD and RMC studies of an Amorphous Ga$_{50}$Se$_{50}$ Alloy Produced by Mechanical Alloying
利用扩展X射线吸收精细结构（EXAFS）和X射线衍射（XRD）技术，以及反向蒙特卡罗（RMC）方法对机械合金化（MA）制备的非晶Ga $_{50}$ Se $_{50}$合金的局域原子有序性进行了研究。通过EXAFS分析和RMC模拟确定了第一邻体的配位数和原子间距离。RMC模拟还提供了部分对分布函数$G^{\text{RMC}}_{\text{Ga-Ga}}(r)$、$G^{\text{RMC}}_{\text{Ga-Se}}(r)$和$G^{\text{RMC}}_{\text{Se-Se}}(r)$。结果表明，MA法制备的非晶态Ga $_{50}$ Se $_{50}$合金的局域结构与相应晶体的局域结构有很大的不同，这是因为在金属玻璃的第一配位壳层中存在Ga $_{50}$ Se $_{50}$晶体中所不允许的Se-Se对。
The lattice dynamics for NiCo, NiFe, NiFeCo, NiFeCoCr, and NiFeCoCrMn medium to high entropy alloy have been investigated using the DFT calculation. The phonon dispersions along three different symmetry directions are calculated by the weighted dynamical matrix (WDM) approach and compared with the supercell approach and inelastic neutron scattering. We could correctly predict the trend of increasing of the vibrational entropy by adding the alloys and the highest vibrational entropy in NiFeCoCrMn high entropy alloy by WDM approach. The averaged first nearest neighbor (1NN) force constants betwe…
In this communication,we propose a sustainable way to produce high entropy alloys from alloy scraps called Alloy mixing.We successfully demonstrate this method using a near equimolar CrCuFeMnNi HEA. Alloy scraps (304L stainless steel, Nichrome 80 and electrical wire grade Copper) obtained from various sources were melted together using vacuum arc melting along with minor additions of Mn and Cr to achieve the equiatomic composition.The alloy was characterized using X-ray Diffraction (XRD) and Scanning Electron Microscopy, which confirmed that the alloy produced through Alloy mixing exhibits a m…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical properties were investigated using X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy and nanoindentation. With increasing Al content, the crystal structure transitioned from a disordered FCC to a mixture of disordered BCC and ordered B2 structures. While the onset of BCC/B2 formation was consistent with previously repor…
Zn-Al alloys have become one of the major engineering alloys among commercially available alloys. This study was conducted on eutectoid composition of Zn-Al alloy with an observation of the effect of copper addition. For this purpose, one eutectoid (Zn-22wt%Al) and three other alloys, adding 1wt%, 3wt% and 5wt% copper with this eutectoid composition, were molded in permanent metal mould. Microscopic studies exhibited varied grains which confirmed the formation of different phases. Moreover, the formation of different phases in micro study was supported by XRD analysis. Hardness of the samples …
The effect of Si on Fe-rich intermetallics formation and mechanical properties of heat-treated squeeze cast Al-5.0Cu-0.6Mn-0.7Fe alloy was investigated. Our results show that increasing Si content promotes the formation of Al15(FeMn)3(SiCu)2 ($α$-Fe), and varying the morphology of T (Al20Cu3Mn2) where the size decreases and the amount increases. The major reason is that Si promotes heterogeneous nucleation of the intermetallics leading to finer precipitates. Si addition significantly enhances ultimate tensile strength and yield strength of the alloys. The strengthening effect is mainly owing t…
We report on the production and characterization of a high-entropy alloy in the refractory Zr-Nb-Ti-V-Hf system. Equiatomic ingots were produced by arc and levitation melting, and were subsequently homogenized by high-temperature annealing. We obtained a coarse-grained, single-phase high-entropy alloy, with a homogeneous distribution of the constituting elements. The phase is a chemically disordered solid solution, based on a bcc lattice with a lattice parameter of 0.336(5) nm.
High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of novel high-entropy Invar alloys in a practically infinite compositional space, based on very sparse data. Our approach works as a closed-loop, integrating machine learning with density-functional the…
Two new, low activation high entropy alloys (HEAs) TiVZrTa and TiVCrTa are studied for use as in-core, structural nuclear materials for in-core nuclear applications. Low-activation is a desirable property for nuclear reactors, in an attempt to reduce the amount of high level radioactive waste upon decommissioning, and for consideration in fusion applications.The alloy TiVNbTa is used as a starting composition to develop two new HEAs; TiVZrTa and TiVCrTa. The new alloys exhibit comparable indentation hardness and modulus, to the TiVNbTa alloy in the as-cast state. After heavy ion implantation t…
New approaches for the design of alloy systems with multiprincipal elements is recently researched in refractory materials field. However, most research aimed at arc melting process with weakness of coarsening of grains and inhomogeneous microstructure of segregation of elements during the cooling. This study aims to design and fabricate high-entropy alloy with powder metallurgy. In this study, a refractory high entropy alloys with composition near AlMo0.5NbTa0.5TiZr were produced by powder metallurgy. The alloy consists of two body-centered cubic (BCC) phases. One phase was disordered BCC enr…
We introduce a simplified method to model the interatomic interactions of high entropy alloys based on a lookup table of cluster energies. These interactions are employed in replica exchange Monte Carlo simulations with histogram analysis to obtain thermodynamic properties across a broad temperature range. Kikuchi's Cluster Variation Method entropy formalism and high temperature series expansions are applied to directly calculate entropy from statistics on short- and long-range chemical order, and we discuss the convergence of the entropy as clusters of differing size are included.
Functionally graded materials (FGMs), have drawn considerable attention of the worldwide researchers and scientific community because of its unique mechanical, thermal and electrical properties which may be exploited by varying the compositions gradually over volume. This makes FGM multifunctional material (properties changing continuously in a certain direction) for specific purpose without creating any phase interface thus making it superior to its composite counterparts. In this paper, we applied Molecular Dynamics (MD) approach to investigate the mechanical properties of functional graded …
In this present investigation, we discussed the synthesis, microstructure, and hydrogen storage behavior intermetallic Laves phase in a hexanal TiVZrMnCoFe high entropy alloy. In this HEA, three elements are hydride-forming elements and the other three are non-hydride-forming elements (Fe, Mn, Co). The thermodynamic parameter like enthalpy of mixing was calculated using Meidmas model.The possibility of developing high entropy Laves phase-based hydrogen storage materials was advocated.
Minor alloying is widely used to control mechanical properties of metallic glasses (MGs). The present understanding of how a small amount of alloying element changes strength is that the additions lead to more efficient packing of atoms and increased local topological order, which then increases the barrier for shear transformations and the resistance to plastic deformation. Here, we discover that minor alloying can improve the strength of MGs by increasing the chemical bond strength alone and show that this strengthening is distinct from changes in topological order. The results were obtained…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe body centred cubic (bcc, CsCl -- type) semi-coherent particles with the {220} Cu // {200} CuBe crystallographic orientation relationship. These particles created significant internal stress fields and became obstacles for dislocation glide that resulted in a change in the hardness from 95 Vickers hardness (HV) for the solubilized alloy to 400 HV for the aged o…
Atom probe tomography (APT), electron probe microanalysis (EPMA) and nanoindentation were used to characterise the oxygen-rich layer on an in-service jet engine compressor disc, manufactured from the titanium alloy TIMETAL 834. Oxygen ingress was quantified and related to changes in mechanical properties through nanoindentation studies. The relationship between oxygen concentration, microstructure, crystal orientation and hardness has been explored through correlative hardness mapping, EPMA and electron backscatter diffraction (EBSD). The role of microstructure on oxygen ingress has been studi…
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases.
High-entropy alloys, near-equiatomic solid solutions of five or more elements, represent a new strategy for the design of materials with properties superior to those of conventional alloys. However, their phase space remains constrained, with transition metal high-entropy alloys exhibiting only face- or body-centered cubic structures. Here, we report the high-pressure synthesis of a hexagonal close-packed phase of the prototypical high-entropy alloy CrMnFeCoNi. This martensitic transformation begins at 14 GPa and is attributed to suppression of the local magnetic moments, destabilizing the ini…
Tracer diffusion of the substitutional components in (CoCrFeNiMn)$_{1-x}$C$_x$ high-entropy alloys with x = 0.002, 0.005 and 0.008 (in at. fractions) is measured at elevated temperatures from 1173 to 1373 K. Two different characteristic effects of interstitial carbon addition on substitutional diffusion in these FCC alloys are distinguished. At the highest temperature of 1373 K, alloying by C with relatively low concentrations (x = 0.002) retards diffusion of the substitutional elements with respect to those in the C-free alloy. At lower temperatures and/or higher C concentrations (x > 0.005),…
Eutectic high entropy alloys (EHEAs) are emerging as an exciting new class of structural alloys as they have shown very promising mechanical properties. However, how to design these alloys has been a challenge. In this work, a simple approach is presented for designing EHEAs. The introduced approach uses the composition of binary and ternary eutectic alloys for finding the composition of EHEAs. The approach is based on the assumption that EHEAs are originated from binary and ternary eutectic alloys. The approach is applied for alloy systems Al-Co-Cr-Fe-Ni, Co-Cr-Fe-Ni, Co-Cr-Fe-Ni-Ti, and Co-C…
We study order transitions and defect formation in a model high-entropy alloy (CuNiCoFe) under ion irradiation by means of molecular dynamics simulations. Using a hybrid Monte-Carlo/molecular dynamics scheme a model alloy is generated which is thermodynamically stabilized by configurational entropy at elevated temperatures, but partly decomposes at lower temperatures by copper precipation. Both the high-entropy and the multiphase sample are then subjected to simulated particle irradiation. The damage accumulation is analyzed and compared to an elemental Ni reference system. The results reveal …
DSC curve fingerprints directly encode mechanical properties of aluminum alloys
LKR Light Metals Technologies, AIT Austrian Institute of Technology（奥地利技术研究所 LKR 轻金属技术）；Faculty of Science and Engineering, Maastricht University（马斯特里赫特大学科学与工程学部）
A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour
High-entropy alloys are an intriguing new class of metallic materials that derive their properties from being multi-element systems that can crystallize as a single phase, despite containing high concentrations of five or more elements with different crystal structures. Here we examine an equiatomic medium-entropy alloy containing only three elements, CrCoNi, as a single-phase face-centered cubic (fcc) solid solution, which displays strength-toughness properties that exceed those of all high-entropy alloys and most multi-phase alloys. At room temperature the alloy shows tensile strengths of al…
High-entropy intermetallic compounds (HEICs) were fabricated by mechanical alloying and spark plasma sintering to fill a knowledge gap between the traditional high-entropy alloys (HEAs) and emerging high-entropy ceramics (HECs). Notably, several four- or five-component equimolar aluminides, such as the B2-phase (Fe1/5Co1/5Ni1/5Mn1/5Cu1/5)Al, have been made into single-phase HEICs for the first time. Thermodynamic modeling and a reversible, temperature-dependent, phase-stability experiment suggest that such B2-phase HEICs are entropy-stabilized phases. The structure of these HEICs resembles tha…
In the present work, a simple approach is proposed for predicting the compositions of eutectic high entropy alloys (EHEAs) in Al-Co-Cr-Fe-Ni system. It is proposed that eutectic lines exist between certain eutectic alloys in this system and, as a result, new eutectic or near-eutectic compositions can be obtained by mixing the alloys which are located on the same eutectic line. The approach is applied for a series of experimentally verified eutectic alloys and new eutectic or near-eutectic alloys are designed for Al-Co-Cr-Fe-Ni system. Furthermore, by investigating the compositions of verified …
The Kubo-Greenwood equation, in combination with the first-principles Korringa-Kohn-Rostoker Coherent Potential Approximation (KKR-CPA) can be used to calculate the DC residual resistivity of random alloys at T = 0 K. We implemented this method in a multiple scattering theory based ab initio package, MuST, and applied it to the ab initio study of the residual resistivity of the high entropy alloy Al$_x$CoCrFeNi as a function of $x$. The calculated resistivities are compared with experimental data. We also predict the residual resistivity of refractory high entropy alloy MoNbTaV$_x$W. The calcu…
We have grown a single crystal of the equiatomic FeCoCrMnAl high-entropy alloy. The crystal was grown by means of the Bridgman technique and is about 1 cm in diameter and 6.6 cm in length. X-ray Laue images taken at various positions on the surface are sharp and mutually consistent, reflecting its single-crystal nature. We thus report on the first successful growth of a single crystal of a high-entropy alloy with a volume of the order of cubic centimeters. The material has a microstructure consisting of B2 inclusions in a body-centered cubic matrix on the 10 nm length scale.
First-principles calculation has led to significant discoveries in materials science. Half heusler (HH) alloys, which are potential thermoelectric materials have demonstrated significant improvements in thermoelectric performance owing to their thermal stability, mechanical strength, and moderate ZT. Using Density Functional Theory (DFT), the structural, mechanical, electronic, and lattice dynamical properties of cubic Half Heusler alloys ZrCoY (Y=Sb, Bi) have been investigated. The unknown exchange-correlation functional is approximated using the generalized gradient approximation (GGA) pseud…
From electronic-structure-based thermodynamic linear-response, we establish chemical ordering behavior in complex solid solutions versus how Gibbs' space is traversed -- applying it on prototype refractory A2 Ta-Nb-Mo-W high-entropy alloys. Near ideal stoichiometry, this alloy has anomalous, intricate chemical ordering tendencies, with long-ranged chemical interactions that produce competing short-range order (SRO) with a crossover to spinodal segregation. This atypical SRO arises from canonical band behavior that, with alloying, create features near the Fermi-surface (well-defined even with d…
