微尺度换热器冷凝流动水热特性参数的数值与实验研究
Parametric study on hydrothermal properties of condensing flow in microtube heat exchangers using numerical and experimental approaches
摘要:
微通道已越来越多地用于使传热设备冷却、提高能量效率和使传热流体存量最小化。对微尺度冷凝的基本理解将为工业的不同领域带来深远的利益。在这项研究中,与内径为250,500,600,和900微米的微管被用来调查的影响微管直径,入口品质,和质量流量的冷凝流的壁边界附近的液体/蒸汽界面。在与实验结果进行验证后,瞬态数值模型(基于流体体积法)被开发来研究冷凝的水热特性,如气泡动力学,流图转换,瞬态界面剪切力,和温度对流动冷凝性能的传热系数和压降。研究了不同微尺度管的液膜厚度、弹状流速度以及微尺度管内环状流向弹状流转变的位置,并详细讨论了微尺度管对凝结换热和压降的影响。实验结果表明,在小于500 μ m和大于500 μ m的微管内,凝结流动的界面特性有很大的不同。
英文摘要:
Microchannels have increasingly been used to miniaturize heat transfer equipment, improve energy efficiency, and minimize heat transfer fluid inventory. A fundamental understanding of condensation in microscale will yield far-reaching benefits for the different areas of industry. In this study, microtubes with inner diameters of 250, 500, 600, and 900 um were used to investigate the effect of microtube diameter, inlet quality, and mass flux on the liquid/vapor interface near the wall boundaries in condensing flow. After validation with the experimental results, a transient numerical model (based on the volume of fluid approach) was developed to investigate the hydrothermal properties of condensing such as bubble dynamics, flow map transitions, transient interface shear force, and temperature on flow condensation performance in terms of heat transfer coefficient and pressure drop. The liquid film thickness, slug velocity, and location of transition from annular flow to slug flow inside the microtube were characterized for different microtubes, and the resultant alteration in condensation flow heat transfer and pressure drop is discussed in detail. The obtained results indicated that the interfacial characteristics of condensing flow in microtubes with hydraulic diameters lower than 500um are majorly different from those with D>500um.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。