Voice cloning is the task of learning to synthesize the voice of an unseen speaker from a few samples. While current voice cloning methods achieve promising results in Text-to-Speech (TTS) synthesis for a new voice, these approaches lack the ability to control the expressiveness of synthesized audio. In this work, we propose a controllable voice cloning method that allows fine-grained control over various style aspects of the synthesized speech for an unseen speaker. We achieve this by explicitly conditioning the speech synthesis model on a speaker encoding, pitch contour and latent style tokens during training. Through both quantitative and qualitative evaluations, we show that our framework can be used for various expressive voice cloning tasks using only a few transcribed or untranscribed speech samples for a new speaker. These cloning tasks include style transfer from a reference speech, synthesizing speech directly from text, and fine-grained style control by manipulating the style conditioning variables during inference.
There are many use cases in singing synthesis where creating voices from small amounts of data is desirable. In text-to-speech there have been several promising results that apply voice cloning techniques to modern deep learning based models. In this work, we adapt one such technique to the case of singing synthesis. By leveraging data from many speakers to first create a multispeaker model, small amounts of target data can then efficiently adapt the model to new unseen voices. We evaluate the system using listening tests across a number of different use cases, languages and kinds of data.
Recently, few-shot voice cloning has achieved a significant improvement. However, most models for few-shot voice cloning are single-modal, and multi-modal few-shot voice cloning has been understudied. In this paper, we propose to use multi-modal learning to improve the few-shot voice cloning performance. Inspired by the recent works on unsupervised speech representation, the proposed multi-modal system is built by extending Tacotron2 with an unsupervised speech representation module. We evaluate our proposed system in two few-shot voice cloning scenarios, namely few-shot text-to-speech(TTS) an…
Voice cloning is a highly desired feature for personalized speech interfaces. Neural network based speech synthesis has been shown to generate high quality speech for a large number of speakers. In this paper, we introduce a neural voice cloning system that takes a few audio samples as input. We study two approaches: speaker adaptation and speaker encoding. Speaker adaptation is based on fine-tuning a multi-speaker generative model with a few cloning samples. Speaker encoding is based on training a separate model to directly infer a new speaker embedding from cloning audios and to be used with…
National Taiwan University（国立台湾大学）；Intelligo Technology Inc.（Intelligo科技公司）
Personalized TTS is an exciting and highly desired application that allows users to train their TTS voice using only a few recordings. However, TTS training typically requires many hours of recording and a large model, making it unsuitable for deployment on mobile devices. To overcome this limitation, related works typically require fine-tuning a pre-trained TTS model to preserve its ability to generate high-quality audio samples while adapting to the target speaker's voice. This process is commonly referred to as ``voice cloning.'' Although related works have achieved significant success in c…
With recent advancements in voice cloning, the performance of speech synthesis for a target speaker has been rendered similar to the human level. However, autoregressive voice cloning systems still suffer from text alignment failures, resulting in an inability to synthesize long sentences. In this work, we propose a variant of attention-based text-to-speech system that can reproduce a target voice from a few seconds of reference speech and generalize to very long utterances as well. The proposed system is based on three independently trained components: a speaker encoder, synthesizer and unive…
Voice cloning is a difficult task which requires robust and informative features incorporated in a high quality TTS system in order to effectively copy an unseen speaker's voice. In our work, we utilize features learned in a self-supervised framework via the Bootstrap Your Own Latent (BYOL) method, which is shown to produce high quality speech representations when specific audio augmentations are applied to the vanilla algorithm. We further extend the augmentations in the training procedure to aid the resulting features to capture the speaker identity and to make them robust to noise and acous…
The task of few-shot style transfer for voice cloning in text-to-speech (TTS) synthesis aims at transferring speaking styles of an arbitrary source speaker to a target speaker's voice using very limited amount of neutral data. This is a very challenging task since the learning algorithm needs to deal with few-shot voice cloning and speaker-prosody disentanglement at the same time. Accelerating the adaptation process for a new target speaker is of importance in real-world applications, but even more challenging. In this paper, we approach to the hard fast few-shot style transfer for voice cloni…
Università degli Studi di Torino（都灵大学）；Cerence Inc.（赛轮思公司）
Deep learning models are becoming predominant in many fields of machine learning. Text-to-Speech (TTS), the process of synthesizing artificial speech from text, is no exception. To this end, a deep neural network is usually trained using a corpus of several hours of recorded speech from a single speaker. Trying to produce the voice of a speaker other than the one learned is expensive and requires large effort since it is necessary to record a new dataset and retrain the model. This is the main reason why the TTS models are usually single speaker. The proposed approach has the goal to overcome …
This paper presents the CUHK-EE voice cloning system for ICASSP 2021 M2VoC challenge. The challenge provides two Mandarin speech corpora: the AIShell-3 corpus of 218 speakers with noise and reverberation and the MST corpus including high-quality speech of one male and one female speakers. 100 and 5 utterances of 3 target speakers in different voice and style are provided in track 1 and 2 respectively, and the participants are required to synthesize speech in target speaker's voice and style. We take part in the track 1 and carry out voice cloning based on 100 utterances of target speakers. An …
In this paper, we present a cross-lingual voice cloning approach. BN features obtained by SI-ASR model are used as a bridge across speakers and language boundaries. The relationships between text and BN features are modeled by the latent prosody model. The acoustic model learns the translation from BN features to acoustic features. The acoustic model is fine-tuned with a few samples of the target speaker to realize voice cloning. This system can generate speech of arbitrary utterance of target language in cross-lingual speakers' voice. We verify that with small amount of audio data, our propos…
Recently, sequence-to-sequence (seq-to-seq) models have been successfully applied in text-to-speech (TTS) to synthesize speech for single-language text. To synthesize speech for multiple languages usually requires multi-lingual speech from the target speaker. However, it is both laborious and expensive to collect high-quality multi-lingual TTS data for the target speakers. In this paper, we proposed to use low-quality code-switched found data from the non-target speakers to achieve cross-lingual voice cloning for the target speakers. Experiments show that our proposed method can generate high-…
One-shot voice cloning aims to transform speaker voice and speaking style in speech synthesized from a text-to-speech (TTS) system, where only a shot recording from the target reference speech can be used. Out-of-domain transfer is still a challenging task, and one important aspect that impacts the accuracy and similarity of synthetic speech is the conditional representations carrying speaker or style cues extracted from the limited references. In this paper, we present a novel one-shot voice cloning algorithm called Unet-TTS that has good generalization ability for unseen speakers and styles.…
Data efficient voice cloning aims at synthesizing target speaker's voice with only a few enrollment samples at hand. To this end, speaker adaptation and speaker encoding are two typical methods based on base model trained from multiple speakers. The former uses a small set of target speaker data to transfer the multi-speaker model to target speaker's voice through direct model update, while in the latter, only a few seconds of target speaker's audio directly goes through an extra speaker encoding model along with the multi-speaker model to synthesize target speaker's voice without model update…
School of Electrical Engineering, KAIST（韩国科学技术院电气工程学院）
In this paper, we explore the possibility of speech synthesis from low quality found data using only limited number of samples of target speaker. We try to extract only the speaker embedding from found data of target speaker unlike previous works which tries to train the entire text-to-speech system on found data. Also, the two speaker mimicking approaches which are adaptation and speaker-encoder-based are applied on newly released LibriTTS dataset and previously released VCTK corpus to examine the impact of speaker variety on clarity and target-speaker-similarity .
University of Adelaide（阿德莱德大学）；South China University of Technology（华南理工大学）；Pazhou Lab（琶洲实验室）
Existing Voice Cloning (VC) tasks aim to convert a paragraph text to a speech with desired voice specified by a reference audio. This has significantly boosted the development of artificial speech applications. However, there also exist many scenarios that cannot be well reflected by these VC tasks, such as movie dubbing, which requires the speech to be with emotions consistent with the movie plots. To fill this gap, in this work we propose a new task named Visual Voice Cloning (V2C), which seeks to convert a paragraph of text to a speech with both desired voice specified by a reference audio …
National Institute of Informatics（国立信息学研究所）；SOKENDAI (The Graduate University for Advanced Studies)（综合研究大学院大学）；Centre of Speech Technology Research, University of Edinburgh（爱丁堡大学语音技术研究中心）
We introduce a novel speech synthesis system, called NAUTILUS, that can generate speech with a target voice either from a text input or a reference utterance of an arbitrary source speaker. By using a multi-speaker speech corpus to train all requisite encoders and decoders in the initial training stage, our system can clone unseen voices using untranscribed speech of target speakers on the basis of the backpropagation algorithm. Moreover, depending on the data circumstance of the target speaker, the cloning strategy can be adjusted to take advantage of additional data and modify the behaviors …
With the increasing popularity of speech synthesis products, the industry has put forward more requirements for personalized speech synthesis: (1) How to use low-resource, easily accessible data to clone a person's voice. (2) How to clone a person's voice while controlling the style and prosody. To solve the above two problems, we proposed the Hieratron model framework in which the prosody and timbre are modeled separately using two modules, therefore, the independent control of timbre and the other characteristics of audio can be achieved while generating speech. The practice shows that, for …
A multi-speaker multi-lingual voice cloning system based on vits2 for limmits 2024 challenge
School of Artificial Intelligence, University of Chinese Academy of Sciences（中国科学院大学人工智能学院）；School of Information and Communication Engineering, Communication University of China（中国传媒大学信息与通信工程学院）；Shanghai Polytechnic University（上海第二工业大学）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）
This paper describes the AS-NU systems for two tracks in MultiSpeaker Multi-Style Voice Cloning Challenge (M2VoC). The first track focuses on using a small number of 100 target utterances for voice cloning, while the second track focuses on using only 5 target utterances for voice cloning. Due to the serious lack of data in the second track, we selected the speaker most similar to the target speaker from the training data of the TTS system, and used the speaker's utterances and the given 5 target utterances to fine-tune our model. The evaluation results show that our systems on the two tracks …
We present a multispeaker, multilingual text-to-speech (TTS) synthesis model based on Tacotron that is able to produce high quality speech in multiple languages. Moreover, the model is able to transfer voices across languages, e.g. synthesize fluent Spanish speech using an English speaker's voice, without training on any bilingual or parallel examples. Such transfer works across distantly related languages, e.g. English and Mandarin. Critical to achieving this result are: 1. using a phonemic input representation to encourage sharing of model capacity across languages, and 2. incorporating an a…
National Institute of Informatics（国立信息学研究所）；SOKENDAI (The Graduate University for Advanced Studies)（综合研究大学院大学（高等研究生院大学））
As the recently proposed voice cloning system, NAUTILUS, is capable of cloning unseen voices using untranscribed speech, we investigate the feasibility of using it to develop a unified cross-lingual TTS/VC system. Cross-lingual speech generation is the scenario in which speech utterances are generated with the voices of target speakers in a language not spoken by them originally. This type of system is not simply cloning the voice of the target speaker, but essentially creating a new voice that can be considered better than the original under a specific framing. By using a well-trained English…
The cloning of a speaker's voice using an untranscribed reference sample is one of the great advances of modern neural text-to-speech (TTS) methods. Approaches for mimicking the prosody of a transcribed reference audio have also been proposed recently. In this work, we bring these two tasks together for the first time through utterance level normalization in conjunction with an utterance level speaker embedding. We further introduce a lightweight aligner for extracting fine-grained prosodic features, that can be finetuned on individual samples within seconds. We show that it is possible to clo…
Voice conversion for highly expressive speech is challenging. Current approaches struggle with the balancing between speaker similarity, intelligibility and expressiveness. To address this problem, we propose Expressive-VC, a novel end-to-end voice conversion framework that leverages advantages from both neural bottleneck feature (BNF) approach and information perturbation approach. Specifically, we use a BNF encoder and a Perturbed-Wav encoder to form a content extractor to learn linguistic and para-linguistic features respectively, where BNFs come from a robust pre-trained ASR model and the …
Fed-PISA: Federated Voice Cloning via Personalized Identity-Style Adaptation
Peng Cheng Laboratory（鹏城实验室）；Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）；Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Singapore University of Technology and Design（新加坡科技设计大学）；National University of Singapore（新加坡国立大学）；The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））
Expressive voice conversion performs identity conversion for emotional speakers by jointly converting speaker identity and emotional style. Due to the hierarchical structure of speech emotion, it is challenging to disentangle the emotional style for different speakers. Inspired by the recent success of speaker disentanglement with variational autoencoder (VAE), we propose an any-to-any expressive voice conversion framework, that is called StyleVC. StyleVC is designed to disentangle linguistic content, speaker identity, pitch, and emotional style information. We study the use of style encoder t…
