膨胀超弹性管中凸起的命运:理论与实验
Fate of a bulge in an inflated hyperleastic tube: theory and experiment
摘要:
在一个临界压力下,受缓慢增加的内压的预张紧有限超弹性管的机械不稳定性产生空间局部的隆起。在持续膨胀下,膨胀的最终结果,主要取决于最终条件和管内的初始张力。在一端固定而另一端自由移动的一端附有自重的管中,膨胀在低初始张力下轴向扩展,长度增长,管通过延伸而松弛。当张力很大时就会破裂。相比之下,在管中形成的凸起,最初被拉伸并在其两端保持固定,可以弯曲或破裂,这取决于初始张力的大小。对不同初始张力和边界条件下的充气橡胶管进行了实验研究。在拉伸参数空间和拉伸-拉伸空间的故障地图的构建,通过扩展理论的鼓包形成和屈曲分析的实验相关的边界条件。根据从理论推导出的故障地图的隆起的命运进行了验证,基本的假设进行了严格的评估。可以得出结论,屈曲提供了一种替代途径,以减轻在膨胀过程中建立的应力。因此,当发生屈曲时,屈曲是防止膨胀的弹性管中的凸起破裂的保护性故障安全机制。
英文摘要:
Mechanical instability in a pre-tensioned finite hyperelastic tube subjected to a slowly increasing internal pressure produces a spatially localized bulge at a critical pressure. The subsequent fate of the bulge, under continued inflation, is critically governed by the end-conditions, and the initial tension in the tube. In a tube with one end fixed and a dead weight attached to the other freely moving end, the bulge propagates axially at low initial tension, growing in length and the tube relaxes by extension. Rupture occurs when the tension is high. In contrast, the bulge formed in a tube, initially stretched and held fixed at both its ends can buckle or rupture, depending on the amount of initial tension. Experiments on inflated latex rubber tubes are presented for different initial tensions and boundary conditions. Failure maps in the stretch parameter space and in stretch-tension space are constructed, by extending the theories for bulge formation and buckling analyses to the experimentally relevant boundary conditions. The fate of the bulge according to the failure maps deduced from the theory is verified; the underlying assumptions are critically assessed. It is concluded that buckling provides an alternate route to relieve the stress built up during inflation. Hence buckling, when it occurs, is a protective fail safe mechanism against the rupture of a bulge in an inflated elastic tube.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。