AlCl $_{3}$ -掺杂的Si(100)-2 $\times$ 1:吸附物、氯化Al链和结合的Al
AlCl$_{3}$-dosed Si(100)-2$\times$1: Adsorbates, chlorinated Al chains, and incorporated Al
摘要:
研究了AlCl $_{3}$在Si(100)上的吸附以及退火对AlCl $_{3}$掺杂衬底的影响,以揭示原子精度受主掺杂技术发展的关键表面过程。通过扫描隧道显微镜(STM),X射线光电子能谱学(XPS)和密度泛函理论(DFT)计算进行了调查。在室温下,AlCl $_{3}$很容易吸附到Si衬底二聚体和解离,形成各种物种。在低于450 $^{\circ}$ ℃的温度下退火AlCl $_{3}$ -掺杂的衬底产生了沿着Si(100)二聚体行方向伸长的独特的氯化铝链(CAC)。链的原子模型提出了支持DFT计算。在450 $^{\circ}$ C及以上退火时,Al被结合到Si衬底中,并且在超过450 $^{\circ}$ C的温度下观察到Cl解吸。将掺入Al的样品封装在Si中,并通过二次离子质谱法(SIMS)深度剖析来表征以量化Al原子浓度,发现在$\sim$ 2.7nm厚的$δ$掺杂区域上,Al原子浓度超过10 $^{20}$ cm $^{-3}$。这里实现的Al浓度和所利用的工艺参数促进AlCl $_{3}$作为用于量子计算的新型受主掺杂Si材料和器件的可行的气态前体。
英文摘要:
The adsorption of AlCl$_{3}$ on Si(100) and the effect of annealing the AlCl$_{3}$-dosed substrate was studied to reveal key surface processes for the development of atomic-precision acceptor-doping techniques. This investigation was performed via scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. At room temperature, AlCl$_{3}$ readily adsorbed to the Si substrate dimers and dissociated to form a variety of species. Annealing of the AlCl$_{3}$-dosed substrate at temperatures below 450 $^{\circ}$C produced unique chlorinated aluminum chains (CACs) elongated along the Si(100) dimer row direction. An atomic model for the chains is proposed with supporting DFT calculations. Al was incorporated into the Si substrate upon annealing at 450 $^{\circ}$C and above, and Cl desorption was observed for temperatures beyond 450 $^{\circ}$C. Al-incorporated samples were encapsulated in Si and characterized by secondary ion mass spectrometry (SIMS) depth profiling to quantify the Al atom concentration, which was found to be in excess of 10$^{20}$ cm$^{-3}$ across a $\sim$2.7 nm thick $δ$-doped region. The Al concentration achieved here and the processing parameters utilized promote AlCl$_{3}$ as a viable gaseous precursor for novel acceptor-doped Si materials and devices for quantum computing.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。