Recently, chalcogenide glass based phase change materials (PCMs) have shown utility as a tuning material for a range of nanophotonic devices. Owing to their low loss, ultrafast switching speeds and wide waveband operation, PCMs are integrated in an increasing number of next generation tunable components, including integrated photonic switches, metasurface optics and tunable spectral filters. Nonetheless, modelling of PCM-based devices is challenging, both in terms of accurate representation of experimentally-derived material properties in different phase states, and standardization of results across the research community. In this work, we introduce PCMnet, an online database of the complex refractive indices of a variety of chalcogenide glass PCMs (such as GeSbTe), as an accessible and indexed repository for data sharing across the PCM community. Refractive indices (n) and extinction coefficients (k) between amorphous and crystalline states are directly extracted from experimentally-derived data in numerous academic research articles, and collated into the material resource database. Due to the inaccuracies associated with our data collection methods, this data is supplemented with additional computationally-generated data, obtained through WVASE, a commercial ellipsometry analysis software package. To demonstrate the utility of PCMnet, we provide a NASA application-driven device optimization example using the optical properties of PCMs collected with our database. We anticipate the database providing great use to the PCM community and coordinated research efforts enabled by PCMnet will promote the shared repository for the selection of appropriate PCMs for tunable nanophotonic device design for a range of applications.
Nanophotonics has garnered intensive attention due to its unique capabilities in molding the flow of light in the subwavelength regime. Metasurfaces (MSs) and photonic integrated circuits (PICs) enable the realization of mass-producible, cost-effective, and highly efficient flat optical components for imaging, sensing, and communications. In order to enable nanophotonics with multi-purpose functionalities, chalcogenide phase-change materials (PCMs) have been introduced as a promising platform for tunable and reconfigurable nanophotonic frameworks. Integration of non-volatile chalcogenide PCMs …
All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change-materials (PCM), which provide a fast, low energy and non-volatile means to endow metasurfaces with a switching mechanism. In this regard, great advancements have been done in the mid infrared and near infrared spectrum using different chalcogeni…
Two-Photon-Induced Direct 3D Printing of Freeform High-Index Phase-Change Sb2S3 Nanostructures
Leibniz Institute of Photonic Technology (IPHT)（莱布尼茨光子技术研究所）；Institute of Physical Chemistry, Friedrich Schiller University Jena (FSU)（耶拿弗里德里希·席勒大学物理化学研究所）；Functional Optical Surfaces and Coatings, Fraunhofer IOF（弗劳恩霍夫光学表面和涂层研究所）；Abbe Center of Photonics and Faculty of Physics, FSU（耶拿弗里德里希·席勒大学阿贝光学中心及物理学院）；Otto Schott Institute of Material Research, FSU（耶拿弗里德里希·席勒大学奥托·肖特材料研究所）；Jena Center for Soft Matter (JCSM), FSU（耶拿弗里德里希·席勒大学软物质研究中心）；Research Center for Applied Sciences, Academia Sinica（中央研究院应用科学研究中心）；Department of Electrophysics, National Yang Ming Chiao Tung University（国立阳明交通大学电子物理系）
High-index dielectric materials are in great demand for nanophotonic devices and applications, from ultrathin optical elements to metal-free sub-diffraction light confinement and waveguiding. Here we show that chalcogenide topological insulators are particularly apt candidates for dielectric nanophotonic architectures in the infrared spectral range by reporting metamaterial resonances in chalcogenide crystals sustained well inside the mid-infrared, choosing Bi$_2$Te$_3$ as case study within this family of materials. Strong resonant modulation of the incident electromagnetic field is achieved t…
Progress in integrated nanophotonics has enabled large-scale programmable photonic integrated circuits (PICs) for general-purpose electronic-photonic systems on a chip. Relying on the weak, volatile thermo-optic or electro-optic effects, such systems usually exhibit limited reconfigurability along with high energy consumption and large footprints. These challenges can be addressed by resorting to chalcogenide phase-change materials (PCMs) such as Ge2Sb2Te5 (GST) that provide substantial optical contrast in a self-holding fashion upon phase transitions. However, current PCM-based integrated pho…
Chalcogenide glasses are exceptional materials that show a wide contrast in optical properties upon phase change and are highly researched for reconfigurable electronic and nanophotonic devices. Here, we report the first proof-of-concept demonstration of a non-volatile, switchable hyperbolic metamaterial based on a chalcogenide glass. By using the $Ge_{2}Sb_{2}Te_{5}$ (GST) alloy as one of the components of a multilayered nanocomposite structure and exploiting its phase change property, we demonstrate a hyperbolic metamaterial in which the Type-I hyperbolic dispersion $(ε_{\perp} < 0, ε_{\para…
Reconfigurable or programmable photonic devices are rapidly growing and have become an integral part of many optical systems. The ability to selectively modulate electromagnetic waves through electrical stimuli is crucial in the advancement of a variety of applications from data communication and computing devices to environmental science and space explorations. Chalcogenide-based phase change materials (PCMs) are one of the most promising material candidates for reconfigurable photonics due to their large optical contrast between their different solid-state structural phases. Although signifi…
Reversible, nonvolatile, and pronounced refractive index modulation is an unprecedented combination of properties enabled by chalcogenide phase-change materials (PCMs). This combination of properties makes PCMs a fast-growing platform for active, low-energy nanophotonics, including tunability to otherwise passive thin-film optical coatings. Here, we integrate the PCM Sb2Se3 into a novel four-layer thin-film optical coating that exploits photonic Fano resonances to achieve tunable structural colors in both reflection and transmission. We show, contrary to traditional coatings, that Fano-resonan…
Actively tunable optical filters based on chalcogenide phase-change materials (PCMs) are an emerging technology with applications across chemical spectroscopy and thermal imaging. The refractive index of an embedded PCM thin film is modulated through an amorphous-to-crystalline phase transition induced through thermal stimulus. Performance metrics include transmittance, passband center wavelength (CWL), and bandwidth; ideally monitored during operation (in situ) or after a set number of tuning cycles to validate real-time operation. Measuring these aforementioned metrics in real-time is challe…
Inducing a large refractive-index change is the holy grail of reconfigurable photonic structures, a goal that has long been the driving force behind the discovery of new optical material platforms. Recently, the unprecedentedly large refractive-index contrast between the amorphous and crystalline states of Ge-Sb-Te (GST)-based phase-change materials (PCMs) has attracted tremendous attention for reconfigurable integrated nanophotonics. Here, we introduce a microheater platform that employs optically transparent and electrically conductive indium-tin-oxide (ITO) bridges for the fast and reversib…
Phase change materials (PCMs) have long been used as a storage medium in rewritable compact disk and later in random access memory. In recent years, the integration of PCMs with nanophotonic structures has introduced a new paradigm for non-volatile reconfigurable optics. However, the high loss of the archetypal PCM Ge2Sb2Te5 in both visible and telecommunication wavelengths has fundamentally limited its applications. Sb2S3 has recently emerged as a wide-bandgap PCM with transparency windows ranging from 610nm to near-IR. In this paper, the strong optical phase modulation and low optical loss o…
Despite recent advances in active metaoptics, wide dynamic range combined with high-speed reconfigurable solutions is still elusive. Phase-change materials (PCMs) offer a compelling platform for metasurface optical elements, owing to the large index contrast and fast yet stable phase transition properties. Here, we experimentally demonstrate an in situ electrically-driven reprogrammable metasurface by harnessing the unique properties of a phase-change chalcogenide alloy, Ge$_{2}$Sb$_{2}$Te$_{5}$ (GST), in order to realize fast, non-volatile, reversible, multilevel, and pronounced optical modul…
Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability that hinders their applicability for front-end dynamic display technologies. Phase-change materials (PCMs), with significant contrast of their optical properties between their amorphous and crystalline states, have demonstrated promising potentials in reconfigurable nanophotonics. Herein, w…
Tunable plasmonic resonances across the visible and near infrared spectra have provided novel ways to develop next-generation nanophotonic devices. In this study, by using optothermally controllable phase-changing material (PCM), we successfully induced highly tunable charge transfer plasmon (CTP) resonance modes. To this end, we have designed a two-member dimer assembly including gold cores and Ge2Sb2Te5 (GST) shells in distant, touching, and overlapping conditions. We successfully demonstrated that toggling between amorphous (dielectric) and crystalline (conductive) phases of GST allows for …
In nanophotonics, small mode volumes, high-quality factor (Q) resonances, and large field enhancements without metals, fundamentally scale with the refractive index and are key for many implementations involving light-matter interactions. Topological insulators (TI) are a class of insulating materials that host topologically protected surface states, some of which exhibit extraordinary high permittivity values. Here, we study the optical properties of TI bismuth telluride (Bi2Te3) single crystals. We find that both the bulk and surface states contribute to the extremely large optical constants…
The functionalities of a wide range of optical and opto-electronic devices are based on resonance effects and active tuning of the amplitude and wavelength response is often essential. Plasmonic nanostructures are an efficient way to create optical resonances, a prominent example is the extraordinary optical transmission (EOT) through arrays of nanoholes patterned in a metallic film. Tuning of resonances by heating, applying electrical or optical signals has proven to be more elusive, due to the lack of materials that can induce modulation over a broad spectral range and/or at high speeds. Her…
Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation, and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability. This hinders their applicability for front-end dynamic display technologies. Phase-change materials (PCMs), with significant contrast of their optical properties between their amorphous and crystalline states, have demonstrated promising potentials in reconfigurable nanophotonics. Herein,…
In the past decades, silicon photonic integrated circuits (PICs) have been considered as a promising approach to solve the bandwidth bottleneck in optical communications and interconnections. Despite significant advances, large-scale PICs still face a series of technical challenges, such as footprint, power consumption, and routing state storage, resulting from the active tuning methods used to control the optical waves. These challenges can be partially addressed by combining chalcogenide phase change materials (PCMs) such as Ge2Sb2Te5 (GST) with silicon photonics, especially applicable in sw…
