用于被动γ发射断层成像的定量成像和自动燃料棒识别
Quantitative Imaging and Automated Fuel Pin Identification for Passive Gamma Emission Tomography
摘要:
成员国遵守《不扩散核武器条约》的情况是通过核保障监督进行监测的。被动γ发射断层扫描系统是国际原子能机构(IAEA)开发的一种新型仪器,用于核查水池中的乏核燃料。先进的图像重建技术对于获得乏燃料棒束的高质量横截面图像至关重要,以便原子能机构视察员监测核材料并迅速查明其转用情况。在这项工作中,我们已经开发了一个软件套件,以准确地重建乏燃料横截面图像,自动识别目前的燃料棒,并估计其活动。由于乏燃料的高活性和自衰减,乏燃料的测量带来了独特的图像重建挑战。我们实现了一个线性前向模型来模拟探测器对PGET内燃料棒的响应。图像重建是通过求解一个正则化的线性逆问题,使用快速迭代收缩阈值算法。我们还实现了传统的滤波反投影方法进行比较,并应用这两种方法来重建模拟样机燃料组件的图像。采用逆问题方法获得了更高的图像分辨率和更少的重建伪影,均方误差降低了50%,结构相似性提高了200%。然后,我们使用卷积神经网络自动识别束类型并从图像中提取引脚位置;最后将估计的活动水平与地面实况进行比较。所提出的计算方法准确地估计了本引脚的活动水平,相关的不确定性约为5%。
英文摘要:
Compliance of member States to the Treaty on the Non-Proliferation of Nuclear Weapons is monitored through nuclear safeguards. The Passive Gamma Emission Tomography system is a novel instrument developed by the International Atomic Energy Agency (IAEA) for the verification of spent nuclear fuel stored in water pools. Advanced image reconstruction techniques are crucial for obtaining high-quality cross-sectional images of the spent-fuel bundle to allow inspectors of the IAEA to monitor nuclear material and promptly identify its diversion. In this work, we have developed a software suite to accurately reconstruct the spent-fuel cross sectional image, automatically identify present fuel rods, and estimate their activity. Unique image reconstruction challenges are posed by the measurement of spent fuel, due to its high activity and the self-attenuation. We implemented a linear forward model to model the detector responses to the fuel rods inside the PGET. The image reconstruction is performed by solving a regularized linear inverse problem using the fast-iterative shrinkage-thresholding algorithm. We have also implemented the traditional filtered back projection method for comparison and applied both methods to reconstruct images of simulated mockup fuel assemblies. Higher image resolution and fewer reconstruction artifacts were obtained with the inverse-problem approach, with the mean-square-error reduced by 50%, and the structural-similarity improved by 200%. We then used a convolutional neural network to automatically identify the bundle type and extract the pin locations from the images; the estimated activity levels finally being compared with the ground truth. The proposed computational methods accurately estimated the activity levels of the present pins, with an associated uncertainty of approximately 5%.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。