首页/论文/2012.14029

arXiv 2012.140292020-12-27cs.ROcs.SYeess.SY

Modeling, Vibration Control, and Trajectory Tracking of a Kinematically Constrained Planar Hybrid Cable-Driven Parallel Robot

University of Waterloo（滑铁卢大学）

Ronghuai Qi, Amir Khajepour, William W. Melek

英文摘要：

This paper presents a kinematically constrained planar hybrid cable-driven parallel robot (HCDPR) for warehousing applications as well as other potential applications such as rehabilitation. The proposed HCDPR can harness the strengths and benefits of serial and cable-driven parallel robots. Based on this robotic platform, the goal in this paper is to develop an integrated control system to reduce vibrations and improve the trajectory accuracy and performance of the HCDPR, including deriving kinematic and dynamic equations, proposing solutions for redundancy resolution and optimization of stiffness, and developing two motion and vibration control strategies (controllers I and II). Finally, different case studies are conducted to evaluate the control performance, and the results show that the controller II can achieve the goal better.

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

阅读原文

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

本文内容

英文摘要相关论文

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

继续探索

相关论文

具有可重构末端执行器的运动学可控索驱动机器人

Kinematically Controllable Cable Robots with Reconfigurable End-effectors

Nan Zhang（独立研究者）

针对索驱动机器人增加缆索导致的旋转工作空间减小和张力解非唯一问题，提出一种结合弹簧、螺旋槽轴与轴承的简单可重构末端执行器，使机构非冗余，实现纯运动学控制。

2025-11-03cs.RO

悬挂在电缆上的非完整机械艺术作品中的振动阻尼——飞行带运动控制

Vibration Damping in Underactuated Cable-suspended Artwork -- Flying Belt Motion Control

NTIS Research Center, University of West Bohemia, Pilsen, Czechia（NTIS研究所以西波西米亚大学，普日辛，捷克）；Antimodular Research Inc., Montreal, Canada（Antimodular研究公司，蒙特利尔，加拿大）；Department of Mechanics, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czechia（力学部门，应用科学学院，西波西米亚大学，普日辛，捷克）

本文改进了Rafael Lozano-Hemmer的交互式机器人艺术装置Standards and Double Standards，通过硬件升级和控制算法优化，解决了振动问题，提升了互动性能。

2026-05-07cs.ROcs.SYeess.SY

Input-Shaping for Feed-Forward Control of Cable-Driven Parallel Robots

University of Nantes（南特大学）；IUT Nantes（南特大学技术学院）；University of Rennes（雷恩大学）；INSA Rennes（雷恩国立应用科学学院）；Centrale Nantes（南特中央理工学院）；CNRS（法国国家科学研究中心）

This paper deals with the use of input-shaping filters in conjunction with a feed-forward control of Cable-Driven Parallel Robots (CDPRs), while integrating cable tension calculation to satisfy positive cable tensions along the prescribed trajectory of the moving-platform. This method aims to attenuate the oscillatory motions of the moving-platform. Thus, the input signal is modified to make it self-cancel residual vibrations. 5 The effectiveness, in terms of moving-platform oscillation attenuation, of the proposed closed-loop control method combined with shaping inputs is experimentally studi…

2020-09-09cs.ROcs.SYeess.SY

Grasp Control of a Cable-Driven Robotic Hand Using a PVDF Slip Detection Sensor

Virginia Tech（弗吉尼亚理工学院）

Detecting and preventing slip is a major challenge in robotic hand operation, underpinning the robot's ability to perform safe and reliable grasps. Using the robotic hand design from the authors' earlier work, a sensing and control strategy is proposed here to prevent object slippage. The robotic hand is cable-driven, single-actuated, has five fingers, and is capable of replicating most human hand motions. The slip sensing approach utilizes a piezoelectric vibration sensor, namely, polyvinylidene fluoride (PVDF), which is a flexible, thin, cheap, and highly sensitive material. The power of the…

2022-02-12cs.ROcs.SYeess.SY

广义柔性混合绳驱动机器人（HCDR）：建模、控制与分析

Generalized Flexible Hybrid Cable-Driven Robot (HCDR): Modeling, Control, and Analysis

University of Waterloo（滑铁卢大学）

本文提出广义柔性混合绳驱动机器人（HCDR）的动力学建模方法，规避传统方法缺陷且可扩展至多类混合机器人；同时研发含冗余度求解、刚度优化的集成控制系统，提出三种控制架构，实验验证全集成策略可显著提升末端执行器跟踪性能。

2020-04-03cs.RO

缆索驱动并联机器人的设计、制造与控制

Design, fabrication and control of a cable-driven parallel robot

Centre for Systems and Control Engineering（系统与控制工程中心）；Indian Institute of Technology Bombay（印度理工学院Bombay）

本文介绍了一种三缆索驱动并联机器人的设计与制造过程，并通过实验验证了开环运动规划算法，为复杂动力学建模与控制奠定基础。

2025-06-23cs.ROmath.DS

更多相关论文收起更多论文

拓扑运动规划扩散：用于缆绳机器人在障碍密集环境中的生成无纠缠路径规划

Topological Motion Planning Diffusion: Generative Tangle-Free Path Planning for Tethered Robots in Obstacle-Rich Environments

本文提出TMPD框架，结合终身拓扑记忆，通过扩散模型生成可行轨迹候选，并利用拓扑后端过滤优化，实现无碰撞和无纠缠的高效路径规划。

2026-03-16cs.RO

用于连续体机器人手臂点对点运动的输入整形

Input Shaping for Point-to-Point Motion with a Continuum Robot Arm

Department of Mechanical and Industrial Engineering, Louisiana State University（路易斯安那州立大学机械与工业工程系）

研究缆绳驱动连续体机器人手臂点对点运动中的残余振动问题，核心方法是应用时滞滤波器作为输入整形器，主要贡献是设计非鲁棒和鲁棒时滞滤波器，实验验证可减少振荡，鲁棒整形器能进一步改善手臂响应。

2026-07-29cs.ROcs.SYeess.SY

分段连续曲杆多点接触张拉整体机器人的几何静力学建模框架

Geometric Static Modeling Framework for Piecewise-Continuous Curved-Link Multi Point-of-Contact Tensegrity Robots

University of Alabama（阿拉巴马大学）

本文针对由两根半圆形曲杆和12根缆索构成的TeXploR张拉整体机器人，提出几何静力学建模框架，首次对非球形两点接触系统进行运动学与几何建模，并通过实验验证了模型精度。

2024-11-21cs.RO

CAST：基于同时轨迹估计与规划的施工机器人碰撞感知装配

CAST: Collision-Aware Assembly with Construction Robots using Simultaneous Trajectory Estimation and Planning

Georgia Institute of Technology（佐治亚理工学院）

本文提出CAST框架，利用单一因子图同时进行轨迹估计与规划，处理施工多机器人系统中的碰撞避免和缆绳约束，并在柱梁结构建造中验证了其有效性。

2026-09-22cs.RO

电驱动相变执行器为软体机器人设计提供动力

Electrically-driven phase transition actuators to power soft robot designs

University of Coimbra（科英布拉大学）

本文提出一种以水为工作流体、由柔性加热元件驱动的液气相变电软体执行器，实现了高应变速率与堵转力，并结合非线性控制方法减少振动与滞后，成功集成于仿生手和四足软体机器人。

2025-04-25cs.RO