基于图像的八点桁架网格结构拉伸性能数值表征与实验验证
Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures
摘要:
由于增材制造(AM)的最新发展,轻质金属晶格结构的生产受到了广泛关注。然而,设计的灵活性伴随着底层物理的复杂性。事实上,金属增材制造引入了工艺引起的几何缺陷,其主要导致有效几何形状与标称几何形状的偏差。最终打印形状的这种变化是AM产品设计和制造机械性能之间存在差距的主要原因。因此,将精确制造的几何形状纳入计算分析的可能性对于最终零件的质量和性能评估至关重要。计算机断层扫描(CT)是一种精确的方法,用于采集制造的形状。然而,由于这种高分辨率几何模型的网格划分过程的复杂性和高昂的数值成本,将基于CT的几何信息集成到传统的计算分析中往往是不可行的。在这项工作中,一个嵌入式的数值框架被应用到有效地模拟和比较的力学行为的设计,制造八角桁架格构结构。这些零件是使用激光粉末床熔合(LPBF)生产的。采用浸入边界法,即有限单元法(FCM),我们进行直接数值模拟(DNS)和一阶数值均匀化分析的拉伸试验的3D打印八角桁架结构。基于CT扫描(作为制造的几何形状)的数值结果显示出与实验测量的良好的一致性,而直接在结构的3D虚拟模型(作为设计的几何形状)上进行的DNS和一阶数值均匀化显示出与实验数据的显着偏差。
英文摘要:
The production of lightweight metal lattice structures has received much attention due to the recent developments in additive manufacturing (AM). The design flexibility comes, however, with the complexity of the underlying physics. In fact, metal additive manufacturing introduces process-induced geometrical defects that mainly result in deviations of the effective geometry from the nominal one. This change in the final printed shape is the primary cause of the gap between the as-designed and as-manufactured mechanical behavior of AM products. Thus, the possibility to incorporate the precise manufactured geometries into the computational analysis is crucial for the quality and performance assessment of the final parts. Computed tomography (CT) is an accurate method for the acquisition of the manufactured shape. However, it is often not feasible to integrate the CT-based geometrical information into the traditional computational analysis due to the complexity of the meshing procedure for such high-resolution geometrical models and the prohibitive numerical costs. In this work, an embedded numerical framework is applied to efficiently simulate and compare the mechanical behavior of as-designed to as-manufactured octet-truss lattice structures. The parts are produced using laser powder bed fusion (LPBF). Employing an immersed boundary method, namely the Finite Cell Method (FCM), we perform direct numerical simulations (DNS) and first-order numerical homogenization analysis of a tensile test for a 3D printed octet-truss structure. Numerical results based on CT scan (as-manufactured geometry) show an excellent agreement with experimental measurements, whereas both DNS and first-order numerical homogenization performed directly on the 3D virtual model (as-designed geometry) of the structure show a significant deviation from experimental data.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。