低成本可编程声延迟线光声层析成像系统
Low-Cost Optoacoustic Tomography System with Programmable Acoustic Delay-Line
摘要:
光声层析成像(PAT)是一种新兴的生物医学成像技术,它结合了高光学对比度和声学穿透的优势。在PAT系统中,优选从全视场检测更多的光声(PA)信号以重建具有更高保真度的PA图像。然而,对更多PA信号检测的要求导致基于单通道扫描的PAT系统的更多时间消耗,或者基于阵列的PAT系统的数据采集(DAQ)模块的更高成本。为了解决这个问题,我们提出了一种可编程声学延迟线模块,以降低数据采集成本,加快PAT系统的成像速度。该模块基于声信号和电信号之间的双向转换,包括其间的超声波传输以提供足够的时间延迟。声学延迟线模块实现了每个通道几十或几百微秒的延迟,并由可编程控制单元控制。在这项工作中,它实现了合并的PA信号的四个输入到一个输出信号,它可以恢复成原来的四个PA信号在数字域后的DAQ。采用该可编程声学延迟线模块构建的PAT系统对琼脂模体中的铅笔芯进行了成像实验,验证了其在生物医学成像系统中的可行性。
英文摘要:
Photoacoustic tomography (PAT) is an emerging technology for biomedical imaging that combines the superiorities of high optical contrast and acoustic penetration. In the PAT system, more photoacoustic (PA) signals are preferred to be detected from full field of view to reconstruct PA images with higher fidelity. However, the requirement for more PA signals detection leads to more time consumption for single-channel scanning based PAT system, or higher cost of data acquisition (DAQ) module for an array-based PAT system. To address this issue, we proposed a programmable acoustic delay line module to reduce DAQ cost and accelerate imaging speed for PAT system. The module is based on bidirectional conversion between acoustic signals and electrical signals, including ultrasound transmission in between to provide sufficient time delay. The acoustic delay line module achieves tens or hundreds of microseconds delay for each channel, and is controlled by a programmable control unit. In this work, it achieves to merge four inputs of PA signals into one output signal, which can be recovered into original four PA signals in the digital domain after DAQ. The imaging experiments of pencil leads embedded in agar phantom is conducted by the PAT system equipped with the proposed programmable acoustic delay-line module, which demonstrated its feasibility in biomedical imaging system.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。