arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2012.01919eess.SP
收藏

应用 Adam 学习算法的啁啾脉冲内部校准过程

Internal Calibration Process Using Chirp Pulses with Application of the Adam Learning Algorithm

Junho Kweon, Chan-Yong Jung, Kyung-Bin Bae, Seong-Ook Park

AI总结:

提出一种以遥感啁啾脉冲为校准信号、结合 Adam 学习算法的内部校准方法,可缓解有源器件热漂移并避免相移模糊,补偿后增益与相位最大差异分别为 0.06 dB 和 2.42 度。

摘要:

我们提出了一种使用啁啾脉冲的新型内部校准过程。该方法用于缓解热漂移,热漂移是指通常发生在高功率放大器和低噪声放大器等有源器件中的非期望变化。所提方法在两个不同方面具有优势:校准信号与算法。在校准信号方面,由于将通常用于遥感的啁啾脉冲用作校准信号,因此该方法不需要额外的信号源。此外,该方法解决了使用正弦信号作为校准信号时分析相移所产生的模糊问题。在算法方面,与传统梯度下降不同,Adam 学习算法可避免沿错误方向学习。利用该方法,成功获得了接收信号的数学形式。与传统梯度下降算法相比,该方法表现出更好的有效性。补偿后,增益和相位的最大差异分别变为 0.06 dB 和 2.42 度。

英文摘要:

We propose a new internal calibration process using chirp pulses. Our method is utilized to mitigate thermal drift, which is unwanted changes and usually occurs in active elements such as a high power amplifier and low noise amplifier. The proposed method has advantages from two distinct aspects: calibration signal and algorithm. In respect to the calibration signal, our method does not contain an additional signal source because chirp pulses, which are normally used for remote sensing, are used as calibration signals. Moreover, our methods solve the ambiguity problem of analyzing a phase shift which occurs when sinusoidal signals are used as calibration signals. In regards to the algorithm, the Adam learning algorithm avoids learning in the wrong direction, unlike the conventional gradient descent. Using our method, mathematical forms of received signals are acquired successfully. Our method shows better effectivity compared to the conventional gradient descent algorithm. After compensation, the maximum differences of gain and phase become 0.06 dB and 2.42 degrees, respectively.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑