arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2011.13221physics.app-phphysics.flu-dyn
收藏

里海南岸振荡波能转换器性能对比分析

Comparative Analysis of Oscillating Wave Energy Converter Performance in Southern Coast of the Caspian Sea

Erfan Amini, Rojin Asadi, Danial Golbaz, Mahdie Nasiri, Seyed Taghi Omid Naeeni, Fereidoun Amini

摘要:

在过去二十年中,可再生能源供应,特别是海浪能的重要性在全球范围内已变得不可否认。伊朗也不例外,因为该国南北都有很深的水。由于这种潜力,第一步是选择,以找到一个合适的网站安装波能转换器(WEC)。下一步是基于条件和几何参数的转换器的适用设计。在这项研究中,具有最大潜力的位置被选择,并使用条件参数作为输入数据来设计的振荡转换器的几何。其次,几何参数模拟的ABAQUS程序,并验证它,在里海的三个案例研究网站被认为是在MATLAB中的WEC-Sim模块设计,同时评估条件和几何参数。最后,将两种结果进行了比较。结果发现,Nowshahr港口比Anzali和Amirabad港口更具潜力,在考虑了拟议的设计后,转炉的生产率提高了63%。它还写道,皮瓣的最佳宽度建议在18米至23米之间。此外,阻尼入射力的变化与系统的效率有直接的关系,并且该力的值在俯仰自由度中的Nowshahr上更大。最后,根据软件的输出,可以得出结论,施加到转换器襟翼后面的动力输出系统的力,这是最关键的力,在评估转换器的性能作为领先的指标,推导和研究站点之间的比较。

英文摘要:

The importance of renewable energy supplies, particularly ocean wave energy, has become undeniable globally in the last two decades. Iran is not an exception due to the long barrier with deep water in the north and south of the country. Because of this potential, the first step is chosen in order to locate a suitable site for installing wave energy converters (WECs). The next step is an applicable design for converters based on conditional and geometrical parameters. In this study, locations with maximum potential are chosen, and conditional parameters are used as input data to design the oscillating converter geometrically. Next, geometric parameters are simulated by the ABAQUS program, and for verifying it, three case study sites in the Caspian sea are considered and designed in the WEC-Sim module in MATLAB to evaluate conditional and geometrical parameters simultaneously. Finally, both results are compared with each other. It is found that the Nowshahr port has more potential than Anzali and Amirabad port, and after considering the proposed design, the converter's productivity raised by 63 percent. It is also written that the flap's optimal width is recommended to be between 18 and 23 meters. Moreover, changes in damping incident forces have a direct relationship with the system's efficiency, and the value of this force is more on Nowshahr in pitch degree of freedom. Finally, according to the software outputs, it can be concluded that the force applied to the power take-off system behind the converter flap, which is the most crucial force in evaluating the performance of the converter as the leading indicator, is derived and compared between studied sites.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑