The critical Casimir force (CCF) arises from confining fluctuations in a critical fluid and thus it is a fluctuating quantity itself. While the mean CCF is universal, its (static) variance has previously been found to depend on the microscopic details of the system which effectively set a large-momentum cutoff in the underlying field theory, rendering it potentially large. This raises the question how the properties of the force variance are reflected in experimentally observable quantities, such as the thickness of a wetting film or the position of a suspended colloidal particle. Here, based on a rigorous definition of the instantaneous force, we analyze static and dynamic correlations of the CCF for a conserved fluid in film geometry for various boundary conditions within the Gaussian approximation. We find that the dynamic correlation function of the CCF is independent of the momentum cutoff and decays algebraically in time. Within the Gaussian approximation, the associated exponent depends only on the dynamic universality class but not on the boundary conditions. We furthermore consider a fluid film, the thickness of which can fluctuate under the influence of the time-dependent CCF. The latter gives rise to an effective non-Markovian noise in the equation of motion of the film boundary and induces a distinct contribution to the position variance. Within the approximations used here, at short times, this contribution grows algebraically in time whereas, at long times, it saturates and contributes to the steady-state variance of the film thickness.
We show that critical Casimir effects can be accessed through direct simulation of a model binary fluid passing through the demixing transition. We work in the semi grand canonical ensemble, in slab geometry, in which the Casimir force appears as the excess of the generalized pressure, $P_{\bot}-nμ$. The excesses of the perpendicular pressure, $P_{\bot}$, and of $nμ$, are individually of much larger amplitude. A critical pressure anisotropy is observed between forces parallel and perpendicular to the confinement direction, which collapses onto a universal scaling function closely related to th…
The force experienced by objects embedded in a correlated medium undergoing thermal fluctuations--the so-called fluctuation--induced force--is actually itself a fluctuating quantity. We compute the corresponding probability distribution and show that it is a Gaussian centered on the well-known Casimir force, with a non-universal standard deviation that can be typically as large as the mean force itself. The relevance of these results to the experimental measurement of fluctuation-induced forces is discussed, as well as the influence of the finite temporal resolution of the measuring apparatus.
We investigate the pseudo-Casimir force in a slab of material composed of nematically ordered long polymers. We write the total mesoscopic energy together with the constraint connecting the local density and director fluctuations and evaluate the corresponding fluctuation free energy by standard methods. It leads to a pseudo-Casimir force of a different type than in the case of standard, short molecule nematic. We investigate its separation dependence and its magnitude and explicitly derive the relevant limiting cases.
We compute fluctuation-induced (Casimir) forces for classical systems after a temperature quench. Using a generic coarse-grained model for fluctuations of a conserved density, we find that transient forces arise even if the initial and final states are force-free. In setups reminiscent of Casimir (planar walls) and van der Waals (small inclusions) interactions, we find comparable exact universal expressions for the force. Dynamical details only scale the time axis of transient force curves. We propose that such quenches can be achieved, for instance, in experiments on active matter, employing …
Although Casimir forces are inseparable from their fluctuations, little is known about these fluctuations in soft matter systems. We use the membrane stress tensor to study the fluctuations of the membrane-mediated Casimir-like force. This method enables us to recover the Casimir force between two inclusions and to calculate its variance. We show that the Casimir force is dominated by its fluctuations. Furthermore, when the distance d between the inclusions is decreased from infinity, the variance of the Casimir force decreases as -1/d^2. This distance dependence shares a common physical origi…
Finite size effect in critical systems can be interpreted as universal Casimir forces. Here we compare the Casimir force for free, periodic and antiperiodic boundary conditions in the exactly calculable case of the Ising model in one and two dimensions. We employ a new procedure which allows us to calculate the Casimir force with periodic and antiperiodic boundary conditions analytically in a transparent manner. Quite interestingly, we find an attractive Casimir force for the case of periodic boundary condition but a repulsive Casimir force for the anti-periodic one.
This article reviews recent progress on the geometry dependence of Casimir interactions and presents some applications to nanosystems. The article consists of three parts: (i) Some examples for geometry dependence: structured surfaces, cylinders, and spheres. (ii) Material dependence: Casimir interaction between nano-spheres. (iii) Casimir force induced non-linear dynamics, ratchet effects.
Casimir forces in a critical media are produced by spatial suppression of order parameter fluctuations. In this paper we address the question how fluctuations of a critical media relates the magnitude of critical Casimir interactions. Namely, for the Ising model we express the potential of critical Casimir interactions in terms of Fortuin-Kasteleyn site-bond correlated percolation clusters. These clusters are quantitative representation of fluctuations in the media. New Monte Carlo method for the computation of the Casimir force potential which is based on this relation is proposed. We verify …
Monte Carlo simulations based on an integration scheme for free energy differences is used to compute critical Casimir forces for three-dimensional Ising films with various boundary fields. We study the scaling behavior of the critical Casimir force, including the scaling variable related to the boundary fields. Finite size corrections to scaling are taken into account. We pay special attention to that range of surface field strengths within which the force changes from repulsive to attractive upon increasing the temperature. Our data are compared with other results available in the literature…
We numerically test an experimentally realizable method for the extraction of the critical Casimir force based on its thermodynamic definition as the derivative of the excess free energy with respect to system size. Free energy differences are estimated for different system sizes by integrating the order parameter along an isotherm. The method could be developed for experiments on magnetic systems and could give access to the critical Casimir force for any universality class. By choosing an applied field that opposes magnetic ordering at the boundaries, the Casimir force is found to increase b…
In confined systems near a continuous phase transition the long-ranged fluctuations of the corresponding order parameter are subject to boundary conditions. These constraints result in so-called critical Casimir forces acting as effective forces on the confining surfaces. For systems belonging to the Ising bulk universality class corresponding to a scalar order parameter the critical Casimir force is studied for the film geometry in the crossover regime characterized by different surface fields at the two surfaces. The scaling function of the critical Casimir force is calculated within mean fi…
We discuss repulsive Casimir forces between dielectric materials with non trivial magnetic susceptibility. It is shown that considerations based on naive pair-wise summation of Van der Waals and Casimir Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force, but even the wrong sign of the force when materials with high dielectric and magnetic response are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces ma…
In a recent letter, Martin and Zagrebnov [Europhys. Lett., 73 (2006) 1] discussed the thermodynamic Casimir effect for the ideal Bose gas confined in a thin film. We point out that their findings can be expressed in terms of previous general results for the Casimir effect induced by confined critical fluctuations. This highlights the links between the Casimir effect in the contexts of critical phenomena and Bose-Einstein condensation.
A novel approach for calculating Casimir forces between periodically deformed objects is developed. This approach allows, for the first time, a rigorous non-perturbative treatment of the Casimir effect for disconnected objects beyond Casimir's original two-plate configuration. The approach takes into account the collective nature of fluctuation induced forces, going beyond the commonly used pairwise summation of two-body van der Waals forces. As an application of the method, we exactly calculate the Casimir force due to scalar field fluctuations between a flat and a rectangular corrugated plat…
We have presented an analytic theory for the Casimir force on a Bose-Einstein condensate (BEC) which is confined between two parallel plates. We have considered Dirichlet boundary conditions for the condensate wave function as well as for the phonon field. We have shown that, the condensate wave function (which obeys the Gross-Pitaevskii equation) is responsible for the mean field part of Casimir force, which usually dominates over the quantum (fluctuations) part of the Casimir force.
In this study, we have derived close form of the Casimir force for the non-interacting ideal Bose gas between two slabs in harmonic-optical lattice potential by using Ketterle and van Druten approximation. We find that Bose-Einstein condensation temperature $T_{c}$ is a critical point for different physical behavior of the Casimir force. We have shown that Casimir force of confined Bose gas in the presence of the harmonic-optical potential decays with inversely proportional to $d^{5}$ when $T\leq T_{c}$. However, in the case of $T>T_{c}$, it decays exponentially depends on separation $d$ of th…
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
We study the Casimir effect for a three dimensional system of ideal free massive Bose gas in a slab geometry with Zaremba and anti-periodic boundary conditions. It is found that for these type of boundary conditions the resulting Casimir force is repulsive in nature, in contrast with usual periodic, Dirichlet or Neumann boundary condition where the Casimir force is attractive (Martin P. A. and Zagrebnov V. A., Europhys. Lett., 73 (2006) 15.). Casimir forces in these boundary conditions also maintain a power law decay function below condensation temperature and exponential decay function above …
We consider the Casimir interaction between (non-magnetic) dielectric bodies or conductors. Our main result is a proof that the Casimir force between two bodies related by reflection is always attractive, independent of the exact form of the bodies or dielectric properties. Apart from being a fundamental property of fields, the theorem and its corollaries also rule out a class of suggestions to obtain repulsive forces, such as the two hemisphere repulsion suggestion and its relatives.
We study the Casimir force acting on a conducting piston with arbitrary cross section. We find the exact solution for a rectangular cross section and the first three terms in the asymptotic expansion for small height to width ratio when the cross section is arbitrary. Though weakened by the presence of the walls, the Casimir force turns out to be always attractive. Claims of repulsive Casimir forces for related configurations, like the cube, are invalidated by cutoff dependence.
Casimir forces are a manifestation of the change in the zero-point energy of the vacuum caused by the insertion of boundaries. We show how the Casimir force can be computed by consideration of the vacuum fluctuations that are suppressed by the boundaries, and rederive the scalar Casimir effects for a series of geometries. For the planar case a finite universal force is automatically found. For curved geometries formally divergent expressions are encountered which we argue are largely due to the divergent self-energy of the boundary contributing to the force. This idea is supported by computing…
We describe experimental and related theoretical work on the measurement of the Casimir force using semiconductor test bodies. This field of research started in 2005 and several important and interesting results have already been obtained. Specifically, the Casimir force or its gradient were measured in the configuration of an Au-coated sphere and different semiconductor surfaces. It was found that the force magnitude depends significantly on the replacement of the metal with a semiconductor and on the concentration of charge carriers in the semiconductor material. Special attention is paid to…
We derive an exact solution for the Casimir force between two arbitrary periodic dielectric gratings and illustrate our method by applying it to two nanostructured silicon gratings. We also reproduce the Casimir force gradient measured recently [1] between a silicon grating and a gold sphere taking into account the material dependence of the force. We find good agreement between our theoretical results and the measured values both in absolute force values and the ratios between the exact force and PFA predictions.
We explore the scattering approach to Casimir forces. Our main tool is the description of Casimir energy in terms of transition operators, as presented in Kenneth and Klich, Phys. Rev. Lett. 97, 160401 (2006). We study the convergence properties of the formula and how to utilize it, together with scattering data to compute the force. We illustrate the approach by describing the force between scatterers in 1d and 3d,, and in particular show how it may be applied in order to study the interaction between two spherical bodies at all distances.
