Self-injection locking to a high-quality-factor microresonator is a key component of various up-to-date photonic applications, including compact narrow-linewidth lasers and microcomb sources. For optimal construction of such devices it is necessary to know the parameters of the locking mode, which is a challenging task. We developed and verified experimentally an original technique based on the fundamentals of the self-injection locking effect, which allows determining the key parameters of the mode of the microresonator (quality factor, vertical index) as well as laser diode parameters. We demonstrated that this method can be used in the spectral ranges where conventional methods are not applicable, for example, in the mid-IR. We stabilized a 2.64 $μ$m laser diode by a high-Q whispering gallery mode microresonator made of crystalline silicon. Using the elaborated technique, the quality factor of the microresonator was determined to be $5\cdot10^8$.
Microresonator-based optical frequency combs have been a topic of extensive research during the last few years. Several theoretical models for the comb generation have been proposed; however, they do not comprehensively address experimental results that show a variety of independent comb generation mechanisms. Here, we present frequency-domain experiments that illuminate the transition of microcombs into phase-locked states, which show characteristics of injection locking between ensembles of comb modes. In addition, we demonstrate the existence of equidistant optical frequency combs that are …
Self-injection locking of a diode laser to a high-quality-factor microresonator is widely used for frequency stabilization and linewidth narrowing. We constructed several microresonator-based laser sources with measured instantaneous linewidths of 1 Hz and used them for investigation and implementation of the self-injection locking effect. We studied analytically and experimentally the dependence of the stabilization coefficient on tunable parameters such as locking phase and coupling rate. It was shown that precise control of the locking phase allows fine tuning of the generated frequency fro…
Self-injection locking is a dynamic phenomenon representing stabilization of the emission frequency of an oscillator with a passive cavity enabling frequency filtered coherent feedback to the oscillator cavity. For instance, self-injection locking of a semiconductor laser to a high-quality-factor (high-Q) whispering gallery mode (WGM) microresonator can result in multiple orders of magnitude reduction of the laser linewidth. The phenomenon was broadly studied in experiments, but its detailed theoretical model allowing improving the stabilization performance does not exist. In this paper we dev…
The stabilization and manipulation of laser frequency by means of an external cavity are nearly ubiquitously used in fundamental research and laser applications. While most of the laser light transmits through the cavity, in the presence of some back-scattered light from the cavity to the laser, the self-injection locking effect can take place, which locks the laser emission frequency to the cavity mode of similar frequency. The self-injection locking leads to dramatic reduction of laser linewidth and noise. Using this approach, a common semiconductor laser locked to an ultrahigh-$Q$ microreso…
Optical injection locking is implemented to faithfully transfer the phase noise of a dissipative Kerr microresonator soliton comb in addition to the amplification of the Kerr comb. Unlike Er-doped fiber and semiconductor optical amplifiers, the optical injection locking amplifies the comb mode without degrading the optical signal-to-noise ratio. In addition, we show that the residual phase noise of the optical injection locking is sufficiently small to transfer the relative phase noise of comb modes (equivalent to the repetition frequency) of low phase noise Kerr combs, concluding that the opt…
Dissipative soliton Kerr frequency combs in microresonators have recently been demonstrated with the self-injection locking process. They have the advantage of turnkey deterministic comb generation and simplifying dark soliton generation in the normal dispersion regime. Here, the formation process of dark pulses triggered by self-injection locking is studied by regarding them as a pair of domain walls that connect domains having different intracavity powers. The self-injection locking mechanism allows the domain walls to self-regulate their position so that a wide range of dark comb states can…
Soliton microcombs constitute chip-scale optical frequency combs, and have the potential to impact a myriad of applications from frequency synthesis and telecommunications to astronomy. The requirement on external driving lasers has been significantly relaxed with the demonstration of soliton formation via self-injection locking of the pump laser to the microresonator. Yet to date, the dynamics of this process has not been fully understood. Prior models of self-injection locking were not able to explain sufficiently large detunings, crucial for soliton formation. Here we develop a theoretical …
We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1…
Diode laser self-injection locking (SIL) to a whispering gallery mode of a high quality factor resonator is a widely used method for laser linewidth narrowing and high-frequency noise suppression. SIL has already been used for the demonstration of ultra-low-noise photonic microwave oscillators and soliton microcomb generation and has a wide range of possible applications. Up to date, SIL was demonstrated only with a single laser. However, multi-frequency and narrow-linewidth laser sources are in high demand for modern telecommunication systems, quantum technologies, and microwave photonics. He…
Dissipative Kerr soliton (DKS) frequency combs - also known as microcombs - have arguably created a new field in cavity nonlinear photonics, with a strong cross-fertilization between theoretical, experimental, and technological research. Spatiotemporal mode-locking (STML) not only add new degrees of freedom to ultrafast laser technology, but also provide new insights for implementing analogue computers and heuristic optimizers with photonics. Here, we combine the principles of DKS and STML for the first time to demonstrate the STML DKS by developing an unexplored ultrahigh-quality-factor Fabry…
Kerr frequency combs from microresonators are now extensively investigated as a potentially portable technology for a variety of applications. Most studies employ anomalous dispersion microresonators that support modulational instability for comb initiation, and mode-locking transitions resulting in coherent bright soliton-like pulse generation have been reported. However, some experiments show comb generation in normal dispersion microresonators; simulations suggest the formation of dark pulse temporal profiles. Excitation of dark pulse solutions is difficult due to the lack of modulational i…
Bifurcation structure of soliton self-injection locking in microresonators
Emergent Complexity in Physical Systems Laboratory (ECPS), Swiss Federal Institute of Technology Lausanne (EPFL)（复杂物理系统实验室，洛桑联邦理工学院）；Laboratoire Temps-Fréquence, Université de Neuchâtel（时间频率实验室，纳沙泰尔大学）
Ultrahigh repetition rate lasers will become vital light sources for many future technologies; however, their realization is challenging because the cavity size must be minimized. Whispering-gallery-mode (WGM) microresonators are attractive for this purpose since they allow the strong light-matter interaction usually needed to enable mode-locking. However, the optimum parameter ranges are entirely unknown since no experiments have yet been conducted. Here, we numerically investigate pulsed operation in a toroidal WGM microresonator with gain and saturable absorption (SA) to study the experimen…
Optical injection locking of integrated ring lasers promises to be a key technology of the future, but it is still lacking experimental verification. In this paper we present two monolithically integrated photonic circuits that experimentally realize Optically injection locking of ring lasers. The presented circuits pave the way for future application in Quantum Key Distribution and coherent communication
We present detailed numerical simulations of the laser dynamics that describe optical frequency comb formation by injection-locking a gain-switched laser. The typical rate equations for semiconductor lasers including stochastic carrier recombination and spontaneous emission suffice to show the injection-locking behavior of gain switched lasers, and we show how the optical frequency comb evolves starting from the free-running state, right through the final injection- locked state. Unlike the locking of continuous wave lasers, we show that the locking range for gain switched lasers is considerab…
We experimentally demonstrate thermo-optic locking of a semiconductor laser to an integrated toroidal optical microresonator. The lock is maintained for time periods exceeding twelve hours, without requiring any electronic control systems. Fast control is achieved by optical feedback induced by scattering centers within the microresonator, with thermal locking due to optical heating maintaining constructive interference between the cavity and the laser. Furthermore, the optical feedback acts to narrow the laser linewidth, with ultra high quality microtoroid resonances offering the potential fo…
The past decade has witnessed major advances in the development of microresonator-based frequency combs (microcombs) that are broadband optical frequency combs with repetition rates in the millimeter-wave to microwave domain. Integrated microcombs can be manufactured using wafer-scale process and have been applied in numerous applications. Most of these advances are based on the harnessing of dissipative Kerr solitons (DKS) in optical microresonators with anomalous group velocity dispersion (GVD). However, microcombs can also be generated with normal GVD using dissipative localized structures …
We experimentally observed self-injection locking regime of the gain-switched laser to high-Q optical microresonator. We revealed that comb generated by the gain-switched laser experiences a dramatic reduce of comb teeth linewidths in this regime. We demonstrated the Lorentzian linewidth of the comb teeth of sub-kHz scale as narrow as for non-switched self-injection locked laser. Such setup allows generation of high-contrast electrically-tunable optical frequency combs with tunable comb line spacing in a wide range from 10 kHz up to 10 GHz. The characteristics of the generated combs were studi…
The optoelectronic oscillator is a delay line oscillator that leverages optical fiber technology to realize the large delay required for low phase noise systems. Spurious sidemodes are an artifact of the delay line oscillator, yet treatments of injection locking of optoelectronic oscillators have relied on the application of classical injection locking theory valid only for single mode oscillators. The large delay contributed by the optical fiber delay line is accounted for by classical theory only in part through the quality factor Q that captures the round-trip group delay in a neighborhood …
We study the injection locking bistability of a specially engineered two-color semiconductor Fabry-Perot laser. Oscillation in the uninjected primary mode leads to a bistability of single mode and two-color equilibria. With pulsed modulation of the injected power we demonstrate an all-optical memory element based on this bistability, where the uninjected primary mode is switched with 35 dB intensity contrast. Using experimental and theoretical analysis, we describe the associated bifurcation structure, which is not found in single mode systems with optical injection.
We have used injection locking to multiply the repetition rate of a passively mode-locked femtosecond fiber laser from 40 MHz to 1 GHz while preserving optical phase coherence between the master laser and the slave output. The system is implemented almost completely in fiber and incorporates gain and passive saturable absorption. The slave repetition rate is set to a rational harmonic of the master repetition rate, inducing pulse formation at the least common multiple of the master and slave repetition rates.
We show, both experimentally and theoretically, that a slave laser injected with an optical frequency comb can undergo two distinct locking mechanisms, both of which decrease the output optical comb's frequency spacing. We report that, for certain detuning and relative injection strengths, slave laser relaxation oscillations can become undamped and lock to rational frequencies of the optical comb spacing, creating extra comb tones by nonlinear dynamics of the injected laser. We also study the frequency locking of the slave laser in between the injected comb lines, which add the slave laser's f…
Injection locking is a powerful technique for synchronization of oscillator networks and controlling the phase and frequency of individual oscillators using similar or other types of oscillators. Here, we present the first demonstration of injection locking of a radiation-pressure driven optomechanical oscillator (OMO) via acoustic waves. As opposed to previously reported techniques (based on pump modulation or direct application of a modulated electrostatic force), injection locking of OMO via acoustic waves does not require optical power modulation or physical contact with the OMO and it can…
Quantum cascade laser (QCL) frequency combs are a promising candidate for chemical sensing and biomedical diagnostics, requiring only milliseconds of acquisition time to record absorption spectra without any moving parts. They are electrically pumped and have a small footprint, making them an ideal platform for on-chip integration. Until now, optical feedback is fatal for frequency comb generation in QCLs and destroys intermodal coherence. This property imposes strict limits on the possible degree of integration. Here, we demonstrate coherent injection locking of the repetition frequency to a …
In this paper, we present an experimental study of the metrological stabilization of a solid-state frequency comb for embedded metrology applications. The comb is a passively mode-locked laser diode based on InGaAs/InP Quantum-dash structure emitting optical lines into a 9 nm bandwidth centered at 1.55 $μ$m with a repetition rate of 10.09 GHz. The frequency stabilization is achieved by optical injection locking of the comb with an external cavity laser diode referenced onto a metrological frequency standard. One observes the transfer of the spectral purity from the injection laser to the neigh…
As self-sustained oscillators, lasers possess the unusual ability to spontaneously synchronize. These nonlinear dynamics are the basis for a simple yet powerful stabilization technique known as injection locking, in which a laser's frequency and phase can be controlled by an injected signal. Due to its inherent simplicity and favorable noise characteristics, injection locking has become a workhorse for coherent amplification and high-fidelity signal synthesis in applications ranging from precision atomic spectroscopy to distributed sensing. Within integrated photonics, however, these injection…
As light propagates along a waveguide, a fraction of the field can be reflected by Rayleigh scatterers. In high-quality-factor whispering-gallery-mode microresonators, this intrinsic backscattering is primarily caused by either surface or bulk material imperfections. For several types of microresonator-based experiments and applications, minimal backscattering in the cavity is of critical importance, and thus, the ability to suppress backscattering is essential. We demonstrate that the introduction of an additional scatterer into the near field of a high-quality-factor microresonator can coher…
Networks of optically coupled semiconductor lasers are of high interest for fundamental investigations and for enabling numerous technological applications in material processing, lighting and information processing. Still, experimental realizations of large networks of such elements employing a scalable concepts have so far been been lacking. Here, we present a network 22 of the vertical-cavity surface-emitting lasers in a $5 \times 5$ square lattice array via. Crucially, the array allows individual control over each laser's pump current, which we leverage spectrally align the array. Leveragi…
High-power visible laser via injection locking to a photonic integrated circuit optical parametric oscillator
National Institute of Standards and Technology（美国国家标准与技术研究院）；Joint Quantum Institute, NIST/University of Maryland（NIST/马里兰大学联合量子研究所）；Tsinghua University（清华大学）
Injection locking of diode lasers is commonly used to amplify low power laser light, but is extremely sensitive to perturbations in the laser current and temperature. To counter such perturbations, active stabilization is often applied to the current of the injection locked diode. We observe that the diode laser's polarization extinction ratio (PER) greatly increases when injection locked, and therefore the PER provides a measure of injection lock quality. We report robust active stabilization of a diode laser injection lock based on the PER, demonstrating the technique at 399 nm wavelength wh…
Higher repetition-rate optical pulse trains have been desired for various applications such as high-bit-rate optical communication, photonic analogue-to-digital conversion, and multi- photon imaging. Generation of multi GHz and higher repetition-rate optical pulse trains directly from mode-locked oscillators is often challenging. As an alternative, harmonic injection locking can be applied for extra-cavity repetition-rate multiplication (RRM). Here we have investigated the operation conditions and achievable performances of all-fibre, highly tunable harmonic injection locking-based pulse RRM. …
Injection locking is a well known and commonly used method for coherent light amplification. Usually injection locking is done with a single-frequency seeding beam. In this work we show that injection locking may also be achieved in the case of multi-frequency seeding beam when slave laser provides sufficient frequency filtering. One relevant parameter turns out to be the frequency detuning between the free running slave laser and each injected frequency component. Stable selective locking to a set of three components separated of $1.2\,$GHz is obtained for (positive) detuning values between z…
Carrier conversion from terahertz wave to dual-wavelength near-infrared light injection-locking to optical comb using asynchronous nonpolarimetric electro-optic downconversion with electro-optic polymer modulator
We developed an original model describing the process of the frequency comb generation in the self-injection locking regime and performed numerical simulation of this process.Generation of the dissipative Kerr solitons in the self-injection locking regime at anomalous group velocity dispersion was studied numerically. Different regimes of the soliton excitation depending on the locking phase, backscattering parameter and pump power were identified. It was also proposed and confirmed numerically that self-injection locking may provide an easy way for the generation of the frequency combs at nor…
We studied the injection-locking properties of a resonant-tunneling-diode terahertz oscillator in the small-signal injection regime with a frequency-stabilized continuous THz wave. The linewidth of the emission spectrum dramatically decreased to less than 120 mHz (HWHM) from 4.4 MHz in the free running state as a result of the injection locking. We experimentally determined the amplitude of injection voltage at the antenna caused by the injected THz wave. The locking range was proportional to the injection amplitude and consistent with Adler's model. As increasing the injection amplitude, we o…
The two-frequency problem of synchronization of the pulse train of a passively mode locked soliton laser to an externally injected pulse train is solved in the weak injection regime. The source and target frequency combs are distinguished by the spacing and offset frequency mismatches. Locking diagrams map the domain in the mismatch parameter space where stable locking of the combs is possible. We analyze the dependence of the locking behavior on the relative frequency and chirp of the source and target pulses, and the conditions where the relative offset frequency has to be actively stabilize…
We experimentally and theoretically investigate injection locking of quantum dot (QD) microlasers in the regime of cavity quantum electrodynamics (cQED). We observe frequency locking and phase-locking where cavity enhanced spontaneous emission enables simultaneous stable oscillation at the master frequency and at the solitary frequency of the slave microlaser. Measurements of the second-order autocorrelation function prove this simultaneous presence of both master and slave-like emission, where the former has coherent character with $g^{(2)}(0)=1$ while the latter one has thermal character wit…
We report a novel optical pulse generation method for high-speed wavelength switching of amplified nanosecond (ns) laser pulses resonant to atomic transitions.Under free-running condition, a slave laser diode is blue-detuned with tens of GHz relative to the master laser. A ns pulse chain generated by modulating the continuous-wave master laser with a fiber-pigtailed electro-optical intensity modulator is injected into the slave laser diode to fast switch the slave laser's wavelength back and forth. The output beam of slave laser is filtered by a temperature-controlled etalon to get the amplifi…
Implementing optical-frequency combs with integrated photonics will enable wider use of precision timing signals.Here, we explore the generation of an octave-span, Kerr-microresonator frequency comb, using hybrid integration ofan InP distributed-feedback laser and a SiN photonic-integrated circuit. We demonstrate electrically pumped and fiber-packaged prototype systems, enabled by self-injection locking. This direct integration of a laser and a microresonatorcircuit without previously used intervening elements, like optical modulators and isolators, necessitates understand-ing self-injection-l…
