In this paper, we investigate the robust outage constrained transmission design for an intelligent reflecting surface (IRS) aided secure communication system. We assume that a single-antenna legitimate receiver (Bob) served by a multi-antenna base station (BS) is overheard by multiple single-antenna eavesdroppers (Eves), and the artificial noise (AN) is incorporated to confuse the Eves. In particular, we aim to jointly optimize the transmit beamforming, the AN spatial distribution at the BS, and the passive beamforming at the IRS, where the Eve-related channels are assumed to be imperfect due to the channel estimation errors and their concealment. Two scenarios with partial channel state information (CSI) error of only cascaded BS-IRS-Eve channel and full CSI errors of both cascaded BS-IRS-Eve channel and direct BS-Eve channel are investigated under the statistical CSI error model. An outage-constrained power minimization problem is formulated by limiting the maximum allowable data rate of Eves and ensuring the minimum data rate requirement of Bob. To solve it, the Bernstein-type inequality and alternating optimization strategy are exploited, and artful mathematical manipulations are performed to facilitate the optimization on the phase shifts of the IRS. Simulation results confirm the performance advantages of the proposed algorithm.
Vehicular communication is an important application of the fifth generation of mobile communication systems (5G). Due to its low cost and energy efficiency, intelligent reflecting surface (IRS) has been envisioned as a promising technique that can enhance the coverage performance significantly by passive beamforming. In this paper, we analyze the outage probability performance in IRS-assisted vehicular communication networks. We derive the expression of outage probability by utilizing series expansion and central limit theorem. Numerical results show that the IRS can significantly reduce the o…
Both unmanned aerial vehicles (UAVs) and intelligent reflecting surfaces (IRS) are gaining traction as transformative technologies for upcoming wireless networks. The IRS-aided UAV communication, which introduces IRSs into UAV communications, has emerged in an effort to improve the system performance while also overcoming UAV communication constraints and issues. The purpose of this paper is to provide a comprehensive overview of IRSassisted UAV communications. First, we provide five examples of how IRSs and UAVs can be combined to achieve unrivaled potential in difficult situations. The techn…
An intelligent reflecting surface (IRS) consists of passive reflective elements capable of altering impinging waveforms. The IRS-aided radar systems have recently been shown to improve detection and estimation performance by exploiting the target information collected via non-line-of-sight paths. However, the waveform design problem for an IRS-aided radar has remained relatively unexplored. In this paper, we consider a multi-IRS-aided orthogonal frequency-division multiplexing (OFDM) radar and study the theoretically achievable accuracy of target detection. In addition, we jointly design the O…
Integrating intelligent reflecting surface (IRS) and Rate-Splitting Multiple Access (RSMA) is an effective solution to improve the spectral/energy efficiency in next-generation (beyond 5G (B5G) and 6G) wireless networks. In this paper, we investigate a rate-splitting (RS)-based transmission technique for an IRS-aided communication network involving both near and cell-edge users. In particular, we derive a new architecture called IRS-RS that leverages the interplay between RS and IRS, with an aim to maximize the weighted sum-rate (WSR) of users by selecting the reflecting coefficients at the IR…
A low-complexity design is proposed for an integrated sensing and communication (ISAC) system aided by an intelligent reflecting surface (IRS). The radar precoder and IRS parameter are computed alternatingly to maximize the weighted sum signal-to-noise ratio (SNR) at the radar and communication receivers. The IRS design problem has an objective function of fourth order in the IRS parameter matrix, and is subject to highly non-convex unit modulus constraints. To address this challenging problem and obtain a low-complexity solution, we employ a minorization technique twice; the original fourth o…
As an excellent aided communication tool, intelligent reflecting surface (IRS) can make a significant rate enhancement and coverage extension. In this paper, we present an investigation on beamforming in an IRS-aided directional modulation (DM) network. To fully explore the advantages of IRS, two beamforming methods with enhanced secrecy rate (SR) performance are proposed. The first method of maximizing secrecy rate (Max-SR) alternately optimizes confidential message (CM) beamforming vector, artificial noise (AN) beamforming vector and phase shift matrix. The first optimization vector is direc…
Intelligent reflecting surface (IRS) has emerged as a revolutionizing solution to enhance wireless communications by intelligently changing the propagation environment. Prior studies on IRS are based on an ideal reflection model with a constant amplitude and a variable phase shift. However, it is difficult and unrealistic to implement an IRS satisfying such ideal reflection model in practical applications. In this letter, we aim to investigate the phase-amplitude-frequency relationship of the reflected signals and propose a practical model of reflection coefficient for an IRS-aided wideband sy…
Intelligent reflecting surfaces (IRSs) improve both the bandwidth and energy efficiency of wideband communication systems by using low-cost passive elements for reflecting the impinging signals with adjustable phase shifts. To realize the full potential of IRS-aided systems, having accurate channel state information (CSI) is indispensable, but it is challenging to acquire, since these passive devices cannot carry out transmit/receive signal processing. The existing channel estimation methods conceived for wideband IRS-aided communication systems only consider the channel's frequency selectivit…
Intelligent reflecting surface (IRS) is being considered as a prospective candidate for next-generation wireless communication due to its ability to significantly improve coverage and spectral efficiency by controlling the propagation environment. One of the ways IRS increases spectral efficiency is by adjusting phase shifts to perform passive beamforming. In this letter, we integrate the concept of IRS-aided communication to the domain of multi-direction beamforming, whereby multiple receive antennas are selected to convey more information bits than existing spatial modulation (SM) techniques…
In this paper, we derive the uplink achievable rate expression of intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) systems, taking into account the phase noise at IRS and the quantization error at base stations (BSs). We show that the performance is limited only by the resolution of analog-digital converters (ADCs) at BSs when the number of IRS reflectors grows without bound. On the other hand, if BSs have ideal ADCs, the performance loss caused by IRS phase noise is a constant. Finally, our results validate the feasibility of using low-precision hardware at the IRS when BSs…
We analyze the outage probability of an intelligent reflecting surface (IRS)-assisted communication network. A tight upper bound on the outage probability is formulated based on the Chernoff inequality. Furthermore, through an exact asymptotic (a large number of reflecting elements) analysis based on a saddlepoint approximation, we derive closed-form expressions of the outage probability for systems with and without a direct link and obtain the corresponding diversity orders. Simulation results corroborate our theoretical analysis and show the inaccuracies inherent in using the central limit t…
The intelligent reflecting surface (IRS) technology has recently attracted a lot of interest in wireless communications research. An IRS consists of passive reflective elements capable of tuning the phase, amplitude, frequency and polarization of the impinging waveforms. Given such desirable properties, the wireless channel characteristics can be controlled and optimized for specific signal design and processing needs -- thus promising significant potential in radar applications. In this paper, we establish the theoretical foundations for introducing IRS into a radar system and study the poten…
In this paper, large-scale intelligent reflecting sur-face (IRS)-assisted multiple-input single-output (MISO) system is considered in the presence of channel uncertainty. To maximize the average sum rate of the system by jointly optimizing the active beamforming at the BS and the passive phase shifts at the IRS, while satisfying the power constraints, a novel robust beamforming design is proposed by using the penalty dual decomposition (PDD) algorithm. By applying the upper bound maximization/minimization (BSUM) method, in each iteration of the algorithm, the optimal solution for each variable…
In this paper, we investigate the outage performance of an intelligent reflecting surface (IRS)-assisted non-orthogonal multiple access (NOMA) uplink, in which a group of the surface reflecting elements are configured to boost the signal of one of the user equipments (UEs), while the remaining elements are used to boost the other UE. By approximating the received powers as Gamma random variables, tractable expressions for the outage probability under NOMA interference cancellation are obtained. We evaluate the outage over different splits of the elements and varying pathloss differences betwee…
This study considers the Joint Transmit/Reflect Beamforming and Power Splitting (JTRBPS) optimization problem in a spectrum underlay setting, such that the transmit sum-energy of the intelligent reflecting surface (IRS)-aided secondary transmitter (ST) is minimized subject to the quality-of-service requirements of the PS-simultaneous wireless information and power transfer (SWIPT) secondary receivers and the interference constraints of the primary receivers (PR). The interference at the PRs caused by the reception of IRS-reflected signals sent by the primary transmitter is taken into account. …
We investigate the use of an intelligent reflecting surface (IRS) in a millimeter-wave (mmWave) vehicular communication network. An intelligent reflecting surface consists of passive elements, which can reflect the incoming signals with adjustable phase shifts. By properly tuning the phase shifts we can improve link performance. This is known as phase optimization or passive beamforming. We consider the problem of rate maximization in the uplink, which utilizes an IRS. However, using an IRS brings more challenges in terms of channel estimation. We propose two schemes to reduce the channel esti…
In this paper, we focus on the sum-rate optimization in a multi-user millimeter-wave (mmWave) system with distributed intelligent reflecting surfaces (D-IRSs), where a base station (BS) communicates with users via multiple IRSs. The BS transmit beamforming, IRS switch vector, and phase shifts of the IRS are jointly optimized to maximize the sum-rate under minimum user rate, unit-modulus, and transmit power constraints. To solve the resulting non-convex optimization problem, we develop an efficient alternating optimization (AO) algorithm. Specifically, the non-convex problem is converted into t…
In this letter, secure beamforming in a multiple intelligent reflecting surfaces (IRSs)-aided millimeter-wave (mmWave) system is investigated. In this system, the secrecy rate is maximized by controlling the on-off status of each IRS as well as optimizing the phase shift matrix of the IRSs. This problem is posed as a joint optimization problem of transmit beamforming and IRS control, whose goal is to maximize the secrecy rate under the total transmission power and unit-modulus constraints. The problem is difficult to solve optimally due to the nonconvexity of constraint conditions and coupled …
Intelligent reflecting surface (IRS) has emerged as a promising and revolutionizing technology for future wireless networks. Most existing IRS studies focus on simple cooperative systems which usually have a single frequency band. In realistic non-cooperative multi-band networks, however, the existing IRS designs may be not applicable or have severe performance degradation. Thus, in the complex network environment, it is more rational to consider IRSs as public resources to be dynamically allocated to appropriate users. In this paper, we first introduce the auction theory to tackle the resourc…
The intelligent reflective surface (IRS) technology has received many interests in recent years, thanks to its potential uses in future wireless communications, in which one of the promising use cases is to widen coverage, especially in the line-of-sight-blocked scenarios. Therefore, it is critical to analyze the corresponding coverage probability of IRS-aided communication systems. To our best knowledge, however, previous works focusing on this issue are very limited. In this paper, we analyze the coverage probability under the Rayleigh fading channel, taking the number and size of the array …
For intelligent reflecting surface (IRS)-aided wireless communications, channel estimation is essential and usually requires excessive channel training overhead when the number of IRS reflecting elements is large. The acquisition of accurate channel state information (CSI) becomes more challenging when the channel is not quasi-static due to the mobility of the transmitter and/or receiver. In this work, we study an IRS-aided wireless communication system with a time-varying channel model and propose an innovative two-stage transmission protocol. In the first stage, we send pilot symbols and tra…
This manuscript presents an energy-efficient alternating optimization framework based on intelligent reflective surfaces (IRS) aided non-orthogonal multiple access beamforming (NOMA-BF) system for 6G wireless communications. Specifically, this work proposes a centralized IRS-enabled design for the NOMA-BF system to optimize the active beamforming and power allocation coefficient (PAC) of users at the transmitter in the first stage and passive beamforming at IRS in the 2nd stage to maximize the energy efficiency (EE) of the network. However, an increment in the number of supportable users with …
Intelligent reflecting surface (IRS) is envisioned as a promising solution for controlling radio propagation environments in future wireless systems. In this paper, we propose a distributed intelligent reflecting surface (IRS) assisted multi-user millimeter wave (mmWave) system, where IRSs are exploited to enhance the mmWave signal coverage when direct links between base station and users are unavailable. First, a joint active and passive beamforming problem is established for weighted sum-rate maximization. Then, an alternating iterative algorithm with closed-form expressions is proposed to t…
An intelligent reflecting surface (IRS) is invoked for enhancing the energy harvesting performance of a simultaneous wireless information and power transfer (SWIPT) aided system. Specifically, an IRS-assisted SWIPT system is considered, where a multi-antenna aided base station (BS) communicates with several multi-antenna assisted information receivers (IRs), while guaranteeing the energy harvesting requirement of the energy receivers (ERs). To maximize the weighted sum rate (WSR) of IRs, the transmit precoding (TPC) matrices of the BS and passive phase shift matrix of the IRS should be jointly…
Intelligent reflecting surfaces (IRSs) are envisioned to provide reconfigurable wireless environments for future communication networks. In this paper, both downlink and uplink IRS-aided non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) networks are studied, in which an IRS is deployed to enhance the coverage by assisting a cell-edge user device (UD) to communicate with the base station (BS). To characterize system performance, new channel statistics of the BS-IRS-UD link with Nakagami-$m$ fading are investigated. For each scenario, the closed-form expressions for the …
Intelligent reflecting surface (IRS) is a rapidly emerging paradigm to enable non-line-of-sight (NLoS) wireless transmission. In this paper, we focus on IRS-aided radar estimation performance of a moving hidden or NLoS target. Unlike prior works that employ a single IRS, we investigate this problem using multiple IRS platforms and assess the estimation performance by deriving the associated Cramer-Rao lower bound (CRLB). We then design Doppler-aware IRS phase shifts by minimizing the scalar A-optimality measure of the joint parameter CRLB matrix. The resulting optimization problem is non-conve…
Simultaneous wireless information and power transfer (SWIPT) and intelligent reflecting surface (IRS) are two promising techniques for providing enhanced wireless communication capability and sustainable energy supply to energy-constrained wireless devices. Moreover, the combination of the IRS and the SWIPT can create the "one plus one greater than two" effect. However, due to the broadcast nature of wireless media, the IRS-aided SWIPT systems are vulnerable to eavesdropping. In this paper, we study the security issue of the IRS-aided SWIPT systems. The objective is to maximize the secrecy rat…
Cooperative Double IRS aided Secure Communication for MIMO-OFDM Systems
University of Electronic Science and Technology of China（电子科技大学）；Laboratory of Electromagnetic Space Cognition and Intelligent Control（电磁空间认知与智能控制实验室）；Tianfu Jiangxi Laboratory（天府江西实验室）；National Mobile Communications Research Laboratory, Southeast University（东南大学国家移动通信重点实验室）
In this letter, we consider an intelligent reflecting surface (IRS)-aided wireless relaying system, where a decode-and-forward relay (R) is employed to forward data from a source (S) to a destination (D), aided by M passive reflecting elements. We consider two practical IRS deployment strategies, namely, single-IRS deployment where all reflecting elements are mounted on one single IRS that is deployed near S, R, or D, and multi-IRS deployment where the reflecting elements are allocated over three separate IRSs which are deployed near S, R, and D, respectively. Under the line-of-sight (LoS) cha…
Intelligent reflecting surface (IRS) is a promising technology to support high performance wireless communication. By adaptively configuring the reflection amplitude and/or phase of each passive reflecting element on it, the IRS can reshape the electromagnetic environment in favour of signal transmission. This letter advances the existing research by proposing and analyzing a double-IRS aided wireless communication system. Under the reasonable assumption that the reflection channel from IRS 1 to IRS 2 is of rank 1 (e.g., line-of-sight channel), we propose a joint passive beamforming design for…
Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequency the phase-shifts induced by their elements, thanks to a wire-like control channel to the next generation node base (gNB). Instead, in this work we investigate an IRS-aided time division multiple acc…
This paper investigates multiple intelligent reflecting surfaces (IRSs) aided wireless network, where the IRSs are deployed to cooperatively assist communications between a multi-antenna base station (BS) and multiple single-antenna cell-edge users. We aim at maximizing the weighted sum rate of all the cell-edge users by jointly optimizing the BS's transmit beamforming and IRS's phase shifts. Especially, the beamforming is optimally solved by the Lagrangian method, and the phase shifts are obtained based on the Riemannian manifold conjugate gradient (RMCG) method. Numerical results show that a…
This paper considers an active intelligent reflecting surface (IRS)-aided wireless powered communication network (WPCN), where devices first harvest energy and then transmit information to a hybrid access point (HAP). Different from the existing works on passive IRS-aided WPCNs, this is the first work that introduces the active IRS in WPCNs. To guarantee fairness, the problem is formulated as an amplifying power-limited weighted sum throughput (WST) maximization problem, which is solved by successive convex approximation technique and fractional programming alternatively. To balance the perfor…
Intelligent reflecting surface (IRS) has shown its effectiveness in facilitating orthogonal time-division integrated sensing and communications (TD-ISAC), in which the sensing task and the communication task occupy orthogonal time-frequency resources, while the role of IRS in the more interesting scenarios of non-orthogonal ISAC (NO-ISAC) systems has so far remained unclear. In this paper, we consider an IRS-aided NO-ISAC system, where a distributed IRS is deployed to assist concurrent communication and location sensing for a blind-zone user, occupying non-orthogonal/overlapped time-frequency …
Intelligent reflecting surface (IRS) as a promising technology rendering high throughput in future communication systems is compatible with various communication techniques such as non-orthogonal multiple-access (NOMA). In this paper, the downlink transmission of IRS-assisted NOMA communication is considered while undergoing imperfect channel state information (CSI). Consequently, a robust IRS-aided NOMA design is proposed by solving the sum-rate maximization problem to jointly find the optimal beamforming vectors for the access point and the passive reflection matrix for the IRS, using the pe…
