Defocus blur always occurred in photos when people take photos by Digital Single Lens Reflex Camera(DSLR), giving salient region and aesthetic pleasure. Defocus blur Detection aims to separate the out-of-focus and depth-of-field areas in photos, which is an important work in computer vision. Current works for defocus blur detection mainly focus on the designing of networks, the optimizing of the loss function, and the application of multi-stream strategy, meanwhile, these works do not pay attention to the shortage of training data. In this work, to address the above data-shortage problem, we turn to rethink the relationship between two tasks: defocus blur detection and salient region detection. In an image with bokeh effect, it is obvious that the salient region and the depth-of-field area overlap in most cases. So we first train our network on the salient region detection tasks, then transfer the pre-trained model to the defocus blur detection tasks. Besides, we propose a novel network for defocus blur detection. Experiments show that our transfer strategy works well on many current models, and demonstrate the superiority of our network.
ONERA（法国航空航天实验室）；Université Paris-Saclay（巴黎-萨克雷大学）；Université Paris Descartes（巴黎笛卡尔大学）
Depth estimation is of critical interest for scene understanding and accurate 3D reconstruction. Most recent approaches in depth estimation with deep learning exploit geometrical structures of standard sharp images to predict corresponding depth maps. However, cameras can also produce images with defocus blur depending on the depth of the objects and camera settings. Hence, these features may represent an important hint for learning to predict depth. In this paper, we propose a full system for single-image depth prediction in the wild using depth-from-defocus and neural networks. We carry out …
South China University of Technology（华南理工大学）；National University of Singapore（新加坡国立大学）
Defocus blur is one kind of blur effects often seen in images, which is challenging to remove due to its spatially variant amount. This paper presents an end-to-end deep learning approach for removing defocus blur from a single image, so as to have an all-in-focus image for consequent vision tasks. First, a pixel-wise Gaussian kernel mixture (GKM) model is proposed for representing spatially variant defocus blur kernels in an efficient linear parametric form, with higher accuracy than existing models. Then, a deep neural network called GKMNet is developed by unrolling a fixed-point iteration o…
A Novel Defocus-Blur Region Detection Approach Based on DCT Feature and PCNN Structure
Hazara University（哈扎拉大学）；Women University Swabi（斯瓦比女子大学）；Seoul National University（首尔大学）；Woosong University（又松大学）；Xiamen University Malaysia（马来西亚厦门大学）；Wrexham Glyndŵr University（雷克瑟姆格林多大学）；University of South Wales（南威尔士大学）
DOF-GS:Adjustable Depth-of-Field 3D Gaussian Splatting for Post-Capture Refocusing, Defocus Rendering and Blur Removal
State Key Laboratory of General Artificial Intelligence, Peking University（通用人工智能国家重点实验室，北京大学）；School of Intelligence Science and Technology, Peking University（智能科学与技术学院，北京大学）；University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）
Reproducing an all-in-focus image from an image with defocus regions is of practical value in many applications, eg, digital photography, and robotics. Using the output of some existing defocus map estimator, existing approaches first segment a de-focused image into multiple regions blurred by Gaussian kernels with different variance each, and then de-blur each region using the corresponding Gaussian kernel. In this paper, we proposed a blind deconvolution method specifically designed for removing defocus blurring from an image, by providing effective solutions to two critical problems: 1) sup…
Defocus Blur Detection(DBD) aims to separate in-focus and out-of-focus regions from a single image pixel-wisely. This task has been paid much attention since bokeh effects are widely used in digital cameras and smartphone photography. However, identifying obscure homogeneous regions and borderline transitions in partially defocus images is still challenging. To solve these problems, we introduce depth information into DBD for the first time. When the camera parameters are fixed, we argue that the accuracy of DBD is highly related to scene depth. Hence, we consider the depth information as the …
This paper proposes a novel deep learning approach for single image defocus deblurring based on inverse kernels. In a defocused image, the blur shapes are similar among pixels although the blur sizes can spatially vary. To utilize the property with inverse kernels, we exploit the observation that when only the size of a defocus blur changes while keeping the shape, the shape of the corresponding inverse kernel remains the same and only the scale changes. Based on the observation, we propose a kernel-sharing parallel atrous convolutional (KPAC) block specifically designed by incorporating the p…
A shallow depth-of-field image keeps the subject in focus, and the foreground and background contexts blurred. This effect requires much larger lens apertures than those of smartphone cameras. Conventional methods acquire RGB-D images and blur image regions based on their depth. However, this approach is not suitable for reflective or transparent surfaces, or finely detailed object silhouettes, where the depth value is inaccurate or ambiguous. We present a learning-based method to synthesize the defocus blur in shallow depth-of-field images from handheld bursts acquired with a single small ape…
Harbin Institute of Technology（哈尔滨工业大学）；Wuhan University（武汉大学）
The defocus deblurring raised from the finite aperture size and exposure time is an essential problem in the computational photography. It is very challenging because the blur kernel is spatially varying and difficult to estimate by traditional methods. Due to its great breakthrough in low-level tasks, convolutional neural networks (CNNs) have been introduced to the defocus deblurring problem and achieved significant progress. However, they apply the same kernel for different regions of the defocus blurred images, thus it is difficult to handle these nonuniform blurred images. To this end, thi…
Trinity College Dublin（都柏林圣三一学院）；Federal University of Rio Grande do Sul（南里奥格兰德州联邦大学）
This paper presents an edge-based defocus blur estimation method from a single defocused image. We first distinguish edges that lie at depth discontinuities (called depth edges, for which the blur estimate is ambiguous) from edges that lie at approximately constant depth regions (called pattern edges, for which the blur estimate is well-defined). Then, we estimate the defocus blur amount at pattern edges only, and explore an interpolation scheme based on guided filters that prevents data propagation across the detected depth edges to obtain a dense blur map with well-defined object boundaries.…
Tohoku University（东北大学）；RIKEN Center for AIP（理化学研究所人工智能中心）
In this paper, we consider the problem in defocus image deblurring. Previous classical methods follow two-steps approaches, i.e., first defocus map estimation and then the non-blind deblurring. In the era of deep learning, some researchers have tried to address these two problems by CNN. However, the simple concatenation of defocus map, which represents the blur level, leads to suboptimal performance. Considering the spatial variant property of the defocus blur and the blur level indicated in the defocus map, we employ the defocus map as conditional guidance to adjust the features from the inp…
Indian Institute of Technology Madras（印度理工学院马德拉斯分校）
In depth from defocus (DFD), when images are captured with different camera parameters, a relative magnification is induced between them. Image warping is a simpler solution to account for magnification than seemingly more accurate optical approaches. This work is an investigation into the effects of magnification on the accuracy of DFD. We comment on issues regarding scaling effect on relative blur computation. We statistically analyze accountability of scale factor, commenting on the bias and efficiency of the estimator that does not consider scale. We also discuss the effect of interpolatio…
State-of-the-art video deblurring methods cannot handle blurry videos recorded in dynamic scenes, since they are built under a strong assumption that the captured scenes are static. Contrary to the existing methods, we propose a video deblurring algorithm that can deal with general blurs inherent in dynamic scenes. To handle general and locally varying blurs caused by various sources, such as moving objects, camera shake, depth variation, and defocus, we estimate pixel-wise non-uniform blur kernels. We infer bidirectional optical flows to handle motion blurs, and also estimate Gaussian blur ma…
Depth information is useful in many image processing applications. However, since taking a picture is a process of projection of a 3D scene onto a 2D imaging sensor, the depth information is embedded in the image. Extracting the depth information from the image is a challenging task. A guiding principle is that the level of blurriness due to defocus is related to the distance between the object and the focal plane. Based on this principle and the widely used assumption that Gaussian blur is a good model for defocus blur, we formulate the problem of estimating the spatially varying defocus blur…
Trinity College Dublin（都柏林圣三一学院）；ADAPT: SFI Centre for Digital Media Technology（ADAPT：SFI数字媒体技术中心）；Federal University of Rio Grande Do Sul（南里奥格兰德联邦大学）
Defocus blur is a physical consequence of the optical sensors used in most cameras. Although it can be used as a photographic style, it is commonly viewed as an image degradation modeled as the convolution of a sharp image with a spatially-varying blur kernel. Motivated by the advance of blur estimation methods in the past years, we propose a non-blind approach for image deblurring that can deal with spatially-varying kernels. We introduce two encoder-decoder sub-networks that are fed with the blurry image and the estimated blur map, respectively, and produce as output the deblurred (deconvolv…
Tsinghua University（清华大学）；Research Institute of Tsinghua University in Shenzhen（清华大学深圳研究院）；Boyan Technology DBA RayShaper China（博研科技（商业名称为RayShaper中国））
Consistent in-focus input imagery is an essential precondition for machine vision systems to perceive the dynamic environment. A defocus blur severely degrades the performance of vision systems. To tackle this problem, we propose a deep-learning-based framework estimating the kernel scale and orientation of the defocus blur to adjust lens focus rapidly. Our pipeline utilizes 3D ConvNet for a variable number of input hypotheses to select the optimal slice from the input stack. We use random shuffle and Gumbel-softmax to improve network performance. We also propose to generate synthetic defocuse…
Koç University（科奇大学）；University College London（伦敦大学学院）；The University of Tokyo（东京大学）
This paper introduces a new multiplane CGH computation method to reconstruct artefact-free high-quality holograms with natural-looking defocus blur. Our method introduces a new targeting scheme and a new loss function. While the targeting scheme accounts for defocused parts of the scene at each depth plane, the new loss function analyzes focused and defocused parts separately in reconstructed images. Our method support phase-only CGH calculations using various iterative (e.g., Gerchberg-Saxton, Gradient Descent) and non-iterative (e.g., Double Phase) CGH techniques. We achieve our best image q…
Defocus blur arises in images that are captured with a shallow depth of field due to the use of a wide aperture. Correcting defocus blur is challenging because the blur is spatially varying and difficult to estimate. We propose an effective defocus deblurring method that exploits data available on dual-pixel (DP) sensors found on most modern cameras. DP sensors are used to assist a camera's auto-focus by capturing two sub-aperture views of the scene in a single image shot. The two sub-aperture images are used to calculate the appropriate lens position to focus on a particular scene region and …
We propose a novel end-to-end learning-based approach for single image defocus deblurring. The proposed approach is equipped with a novel Iterative Filter Adaptive Network (IFAN) that is specifically designed to handle spatially-varying and large defocus blur. For adaptively handling spatially-varying blur, IFAN predicts pixel-wise deblurring filters, which are applied to defocused features of an input image to generate deblurred features. For effectively managing large blur, IFAN models deblurring filters as stacks of small-sized separable filters. Predicted separable deblurring filters are a…
We present a method that takes as input a single dual-pixel image, and simultaneously estimates the image's defocus map -- the amount of defocus blur at each pixel -- and recovers an all-in-focus image. Our method is inspired from recent works that leverage the dual-pixel sensors available in many consumer cameras to assist with autofocus, and use them for recovery of defocus maps or all-in-focus images. These prior works have solved the two recovery problems independently of each other, and often require large labeled datasets for supervised training. By contrast, we show that it is beneficia…
In recent years, the usefulness of 3D shape estimation is being realized in microscopic or close-range imaging, as the 3D information can further be used in various applications. Due to limited depth of field at such small distances, the defocus blur induced in images can provide information about the 3D shape of the object. The task of `shape from defocus' (SFD), involves the problem of estimating good quality 3D shape estimates from images with depth-dependent defocus blur. While the research area of SFD is quite well-established, the approaches have largely demonstrated results on objects w…
University of California, Berkeley, California, USA（加州大学伯克利分校）；NASA Ames Research Center, Moffett Field, California, USA（美国航空航天局阿姆斯研究中心）；KBR, Houston, Texas, USA（KBR公司）
City University of Hong Kong（香港城市大学）；Max-Planck-Institut für Informatik（马克斯·普朗克信息学研究所）；Stanford University（斯坦福大学）
Defocus deblurring is a challenging task due to the spatially varying nature of defocus blur. While deep learning approach shows great promise in solving image restoration problems, defocus deblurring demands accurate training data that consists of all-in-focus and defocus image pairs, which is difficult to collect. Naive two-shot capturing cannot achieve pixel-wise correspondence between the defocused and all-in-focus image pairs. Synthetic aperture of light fields is suggested to be a more reliable way to generate accurate image pairs. However, the defocus blur generated from light field dat…
Recent work has shown impressive results on data-driven defocus deblurring using the two-image views available on modern dual-pixel (DP) sensors. One significant challenge in this line of research is access to DP data. Despite many cameras having DP sensors, only a limited number provide access to the low-level DP sensor images. In addition, capturing training data for defocus deblurring involves a time-consuming and tedious setup requiring the camera's aperture to be adjusted. Some cameras with DP sensors (e.g., smartphones) do not have adjustable apertures, further limiting the ability to pr…
Dalian University of Technology（大连理工大学）；Stony Brook University（石溪大学）
Blind image deblurring algorithms have been improving steadily in the past years. Most state-of-the-art algorithms, however, still cannot perform perfectly in challenging cases, especially in large blur setting. In this paper, we focus on how to estimate a good kernel estimate from a single blurred image based on the image structure. We found that image details caused by blurring could adversely affect the kernel estimation, especially when the blur kernel is large. One effective way to eliminate these details is to apply image denoising model based on the Total Variation (TV). First, we devel…
Data-driven depth estimation methods struggle with the generalization outside their training scenes due to the immense variability of the real-world scenes. This problem can be partially addressed by utilising synthetically generated images, but closing the synthetic-real domain gap is far from trivial. In this paper, we tackle this issue by using domain invariant defocus blur as direct supervision. We leverage defocus cues by using a permutation invariant convolutional neural network that encourages the network to learn from the differences between images with a different point of focus. Our …
Image deblurring techniques play important roles in many image processing applications. As the blur varies spatially across the image plane, it calls for robust and effective methods to deal with the spatially-variant blur problem. In this paper, a Saliency-based Deblurring (SD) approach is proposed based on the saliency detection for salient-region segmentation and a corresponding compensate method for image deblurring. We also propose a PDE-based deblurring method which introduces an anisotropic Partial Differential Equation (PDE) model for latent image prediction and employs an adaptive opt…
University of Science and Technology of China（中国科学技术大学）；Noah’s Ark Lab, Huawei Technologies（华为技术有限公司诺亚方舟实验室）；Huawei Cloud BU（华为云BU）
Moire artifacts are common in digital photography, resulting from the interference between high-frequency scene content and the color filter array of the camera. Existing deep learning-based demoireing methods trained on large scale datasets are limited in handling various complex moire patterns, and mainly focus on demoireing of photos taken of digital displays. Moreover, obtaining moire-free ground-truth in natural scenes is difficult but needed for training. In this paper, we propose a self-adaptive learning method for demoireing a high-frequency image, with the help of an additional defocu…
Samsung Research China - Beijing (SRC-B)（三星中国研究院-北京）
Recent works achieve excellent results in defocus deblurring task based on dual-pixel data using convolutional neural network (CNN), while the scarcity of data limits the exploration and attempt of vision transformer in this task. In addition, the existing works use fixed parameters and network architecture to deblur images with different distribution and content information, which also affects the generalization ability of the model. In this paper, we propose a dynamic multi-scale network, named DMTNet, for dual-pixel images defocus deblurring. DMTNet mainly contains two modules: feature extr…
University of Chicago（芝加哥大学）；TTI-Chicago（芝加哥丰田技术研究所）
State-of-the-art algorithms for many semantic visual tasks are based on the use of convolutional neural networks. These networks are commonly trained, and evaluated, on large annotated datasets of artifact-free high-quality images. In this paper, we investigate the effect of one such artifact that is quite common in natural capture settings: optical blur. We show that standard network models, trained only on high-quality images, suffer a significant degradation in performance when applied to those degraded by blur due to defocus, or subject or camera motion. We investigate the extent to which …
Recent works on salient object detection have made use of multi-scale features in a way such that high-level features and low-level features can collaborate in locating salient objects. Many of the previous methods have achieved great performance in salient object detection. By merging the high-level and low-level features, a large number of feature information can be extracted. Generally, they are doing these in a one-way framework, and interweaving the variable features all the way to the final feature output. Which may cause some blurring or inaccurate localization of saliency maps. To over…
Tencent AI Lab（腾讯AI实验室）；University of Connecticut（康涅狄格大学）；The Fourth Hospital of Hebei Medical University（河北医科大学第四医院）；West China Hospital, Sichuan University（四川大学华西医院）
Artificial Intelligence (AI)-powered pathology is a revolutionary step in the world of digital pathology and shows great promise to increase both diagnosis accuracy and efficiency. However, defocus and motion blur can obscure tissue or cell characteristics hence compromising AI algorithms'accuracy and robustness in analyzing the images. In this paper, we demonstrate a deep-learning-based approach that can alleviate the defocus and motion blur of a microscopic image and output a sharper and cleaner image with retrieved fine details without prior knowledge of the blur type, blur extent and patho…
The Chinese University of Hong Kong（香港中文大学）；Peng Cheng Laboratory（鹏城实验室）；Westlake University（西湖大学）；Westlake Institute for Advanced Study（西湖高等研究院）
Local feature detection is a key ingredient of many image processing and computer vision applications, such as visual odometry and localization. Most existing algorithms focus on feature detection from a sharp image. They would thus have degraded performance once the image is blurred, which could happen easily under low-lighting conditions. To address this issue, we propose a simple yet both efficient and effective keypoint detection method that is able to accurately localize the salient keypoints in a blurred image. Our method takes advantages of a novel multi-layer perceptron (MLP) based arc…
Nanjing University of Aeronautics and Astronautics（南京航空航天大学）；University of Leicester（莱斯特大学）
Deep-learning based salient object detection methods achieve great improvements. However, there are still problems existing in the predictions, such as blurry boundary and inaccurate location, which is mainly caused by inadequate feature extraction and integration. In this paper, we propose a Multi-scale Edge-based U-shape Network (MEUN) to integrate various features at different scales to achieve better performance. To extract more useful information for boundary prediction, U-shape Edge Network modules are embedded in each decoder units. Besides, the additional down-sampling module alleviate…
Fully Convolutional Neural Network (FCN) has been widely applied to salient object detection recently by virtue of high-level semantic feature extraction, but existing FCN based methods still suffer from continuous striding and pooling operations leading to loss of spatial structure and blurred edges. To maintain the clear edge structure of salient objects, we propose a novel Edge-guided Non-local FCN (ENFNet) to perform edge guided feature learning for accurate salient object detection. In a specific, we extract hierarchical global and local information in FCN to incorporate non-local feature…
Korea Institute of Science and Technology (KIST)（韩国科学技术院）；Yonsei University（延世大学）
Neural Radiance Field (NeRF) has exhibited outstanding three-dimensional (3D) reconstruction quality via the novel view synthesis from multi-view images and paired calibrated camera parameters. However, previous NeRF-based systems have been demonstrated under strictly controlled settings, with little attention paid to less ideal scenarios, including with the presence of noise such as exposure, illumination changes, and blur. In particular, though blur frequently occurs in real situations, NeRF that can handle blurred images has received little attention. The few studies that have investigated …
Dalian University of Technology（大连理工大学）；University of Adelaide（阿德莱德大学）；Shanghai Jiao Tong University（上海交通大学）
Salient object detection, which aims to identify and locate the most salient pixels or regions in images, has been attracting more and more interest due to its various real-world applications. However, this vision task is quite challenging, especially under complex image scenes. Inspired by the intrinsic reflection of natural images, in this paper we propose a novel feature learning framework for large-scale salient object detection. Specifically, we design a symmetrical fully convolutional network (SFCN) to learn complementary saliency features under the guidance of lossless feature reflectio…
Salient object detection has recently witnessed substantial progress due to powerful features extracted using deep convolutional neural networks (CNNs). However, existing CNN-based methods operate at the patch level instead of the pixel level. Resulting saliency maps are typically blurry, especially near the boundary of salient objects. Furthermore, image patches are treated as independent samples even when they are overlapping, giving rise to significant redundancy in computation and storage. In this CVPR 2016 paper, we propose an end-to-end deep contrast network to overcome the aforementione…
Dalian University of Technology（大连理工大学）；Shanghai Jiao Tong University（上海交通大学）；University of Adelaide（阿德莱德大学）
Salient object detection (SOD), which aims to identify and locate the most salient pixels or regions in images, has been attracting more and more interest due to its various real-world applications. However, this vision task is quite challenging, especially under complex image scenes. Inspired by the intrinsic reflection of natural images, in this paper we propose a novel feature learning framework for large-scale salient object detection. Specifically, we design a symmetrical fully convolutional network (SFCN) to effectively learn complementary saliency features under the guidance of lossless…
