This paper proposes a method of identifying single line outages in power systems based on phasor measurement unit (PMU) measurements and ac power flow models. In addition to the main identification algorithm, a rejection filter is introduced so that the preliminary identified results can be further processed and categorized into three types: correctly identified, misidentified and inconclusive (including correct-filtered and misidentified-filtered). The methods are systematically tested using test systems of various sizes for various PMU placements, and the results show that the proposed identification algorithm has a high identification accuracy and the proposed rejection filter is able to reduce the misidentified rate without significantly increasing the number of inconclusive cases.
Phasor measurement units (PMUs) create ample real-time monitoring opportunities for modern power systems. Among them, line outage detection and identification remains a crucial but challenging task. Current works on outage identification succeed in full PMU deployment and single-line outages. Performance however degrades for multiple-line outage with partial system observability. We propose a novel framework of multiple-line outage identification using partial nodal voltage measurements. Using alternating current (AC) power flow model, phase angle signatures of outages are extracted and used t…
Phasor Measurement Unit (PMU) technology is increasingly used for real-time monitoring applications, especially line outage detection and identification (D&I) in the power system. Current outage D&I schemes either assume a full PMU deployment or a partial deployment with fixed PMU placement. However, the placement of the PMUs has a fundamental impact on the effectiveness of the D&I scheme. Building on a dynamic relationship between the substation voltage phase angle and active power, we formulated the optimal PMU placement problem for outage D&I as an optimization problem readily solvable by a…
Stanford University（斯坦福大学）；Arizona State University（亚利桑那州立大学）
The growing integration of distributed energy resources (DERs) in distribution grids raises various reliability issues due to DER's uncertain and complex behaviors. With a large-scale DER penetration in distribution grids, traditional outage detection methods, which rely on customers report and smart meters' last gasp signals, will have poor performance, because the renewable generators and storages and the mesh structure in urban distribution grids can continue supplying power after line outages. To address these challenges, we propose a data-driven outage monitoring approach based on the sto…
Location Identification of Power Line Outages Using PMU Measurements with Bad Data
National Sun Yat-sen University（国立中山大学）；National Kaohsiung Normal University（国立高雄师范大学）；University College London（伦敦大学学院）；Singapore University of Technology and Design（新加坡科技设计大学）
Phasor measurement units (PMUs) are important devices for protection, monitoring, and control of modern power systems. Unlike the supervisory control and data acquisition (SCADA) system which only measure the magnitude, PMUs can provide a set of synchronized phasor measurements with high sampling rate with the accuracy of less than one second, for better system monitoring especially during the outages. Since the PMUs are costly devices, system operator is not able to install a PMU at each bus to maximize the observability of system. To this end, determination of the number of PMUs in the syste…
Online decision support for effective mitigation actions against propagating cascading outages in a power grid still poses a big challenge to grid operators. This paper proposes an online mitigation strategy against cascading outages using an optimal power flow model based on a Dynamic Interaction Graph. For a given power grid, its interaction graph, also called an interaction model, was proposed in recent literature, which is composed of components and links that have large contributions to outage propagation. Differing from a conventional interaction graph, a Dynamic Interaction Graph can ad…
When multiple outages occur in rapid succession, it is important to know quickly if the power transfer capability of different interconnections (or cut-sets) of the power network are limited. The algorithm developed in this paper identifies such limited cut-sets very fast, thereby enhancing the real-time situational awareness of power system operators. The significance of the proposed approach is described using the IEEE 39-bus test system, while its computational benefits are demonstrated using relatively large test-cases containing thousands of buses. The results indicate that the proposed n…
Power system N-x contingency analysis has inherent challenges due to its combinatorial characteristic where outages grow exponentially with the increase of x and N. To address these challenges, this paper proposes a method that utilizes Line Outage Distribution Factors (LODFs) and group betweenness centrality to identify subsets of critical branches. The proposed LODF metrics are used to select the high-impact branches. Based on each selected branch, the approach constructs the subgraph with parameters of distance and search level, while using branches' LODF metrics as the weights. A key innov…
During major power system disturbances, when multiple component outages occur in rapid succession, it becomes crucial to quickly identify the transmission interconnections that have limited power transfer capability. Understanding the impact of an outage on these critical interconnections (called saturated cut-sets) is important for enhancing situational awareness and taking correct actions. This paper proposes a new graph theoretic approach for analyzing whether a contingency will create a saturated cut-set in a meshed power network. A novel feature of the proposed algorithm is that it lowers…
Lossy Cooperative UAV Relaying Networks: Outage Probability Analysis and Location Optimization
School of Electronics and Information, Northwestern Polytechnical University（西北工业大学电子信息学院）；Research institute of Information Fusion, Naval Aviation University（海军航空大学信息融合研究所）；University of Houston（休斯顿大学）；IMT-Atlantic（大西洋电信学院）；University of Oulu（奥卢大学）
Knowledge of power grid's topology during cascading failure is an essential element of centralized blackout prevention control, given that multiple islands are typically formed, as a cascade progresses. Moreover, academic research on interdependency between cyber and physical layers of the grid indicate that power failure during a cascade may lead to outages in communication networks, which progressively reduce the observable areas. These challenge the current literature on line outage detection, which assumes that the grid remains as a single connected component. We propose a new approach to …
In this paper, we propose an AC power flow based cascading failure model that explicitly considers external weather conditions, extreme temperatures in particular, and evaluates the impact of extreme temperature on the initiation and propagation of cascading blackouts. Specifically, load and dynamic line rating changes are modeled due to temperature disturbance, the probabilities for transmission line and generator outages are evaluated, and the timing for each type of events is carefully calculated to decide the actual event sequence. It should be emphasized that the correlated events, in the…
Event Detection and Localization in Distribution Grids with Phasor Measurement Units
University of British Columbia（不列颠哥伦比亚大学）；Huazhong University of Science and Technology（华中科技大学）；University of California at Berkeley（加州大学伯克利分校）；California Institute of Technology（加州理工学院）
