arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2011.07370cs.RO
收藏

步行驱动三足机器人的运动与控制

Locomotion and Control of a Friction-Driven Tripedal Robot

University of Southern California(南加州大学);University of Michigan(密歇根大学)

Mark Hermes, Taylor McLaughlin, Mitul Luhar, Quan Nguyen

摘要:

这封信认为控制径向对称的三足摩擦驱动机器人。该机器人具有3个伺服电机,安装在距离质心7厘米的3D打印底盘上,并分开120度。这些马达驱动肢体,肢体在身体上施加摩擦反作用力。在均匀摩擦表面上进行的实验观察验证了机器人运动的数学模型。该模型用于创建步态地图,其特征在于瞬时全方位控制。我们展示了使用来自头顶跟踪摄像机的实时反馈的线路跟踪。将比例积分误差补偿性能与矩形路线上的基本位置更新程序进行比较。该控制器使路径误差减小了约$46\%$。误差补偿器还能够校正由平均流速为$5.5ms^{-1}$的大容量工业风扇产生的空气动力学扰动,从而相对于基本位置更新过程将路径误差减小$65\%$。

英文摘要:

This letter considers control of a radially symmetric tripedal friction-driven robot. The robot features 3 servo motors mounted on a 3-D printed chassis 7 cm from the center of mass and separated 120 degrees. These motors drive limbs, which impart frictional reactive forces on the body. Experimental observations performed on a uniform friction surface validated a mathematical model for robot motion. This model was used to create a gait map, which features instantaneous omni-directional control. We demonstrated line following using live feedback from an overhead tracking camera. Proportional-Integral error compensation performance was compared to a basic position update procedure on a rectangular course. The controller reduced path error by approximately $46\%$. The error compensator is also able to correct for aerodynamic disturbances generated by a high-volume industrial fan with a mean flow speed of $5.5ms^{-1}$, reducing path error by $65\%$ relative to the basic position update procedure.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑