We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the assumption that the CME mass is roughly equally distributed within a specific volume, we expand the CME self-similarly and calculate the CME density for distances close to the Sun (15-30 Rs) and at 1AU. Specific trends are derived comparing calculated and in-situ measured proton densities at 1AU, though large uncertainties are revealed due to the unknown mass and geometry evolution: i) a moderate correlation for the magnetic structure having a mass that stays rather constant (~0.56-0.59), and ii) a weak correlation for the sheath density (~0.26) by assuming the sheath region is an extra mass - as expected for a mass pile-up process - that is in its amount comparable to the initial CME deprojected mass. High correlations are derived between in-situ measured sheath density and the solar wind density (~ -0.73) and solar wind speed (~0.56) as measured 24 hours ahead of the arrival of the disturbance. This gives additional confirmation that the sheath-plasma indeed stems from piled-up solar wind material. While the CME interplanetary propagation speed is not related to the sheath density, the size of the CME may play some role in how much material could be piled up.
We present general considerations regarding the derivation of the radial distances of coronal mass ejections (CMEs) from elongation angle measurements such as those provided by SECCHI and SMEI, focusing on measurements in the Heliospheric Imager 2 (HI-2) field of view (i.e. past 0.3 AU). This study is based on a three-dimensional (3-D) magneto-hydrodynamics (MHD) simulation of two CMEs observed by SECCHI on January 24-27, 2007. Having a 3-D simulation with synthetic HI images, we are able to compare the two basic methods used to derive CME positions from elongation angles, the so-called "Point…
Non-conventional Approach for Deriving the Radial Sizes of Coronal Mass Ejections at Different Instances: Discrepancies in the Estimates Between Remote and In Situ Observations
The successive coronal mass ejections (CMEs) from 2010 July 30 - August 1 present us the first opportunity to study CME-CME interactions with unprecedented heliospheric imaging and in situ observations from multiple vantage points. We describe two cases of CME interactions: merging of two CMEs launched close in time and overtaking of a preceding CME by a shock wave. The first two CMEs on August 1 interact close to the Sun and form a merged front, which then overtakes the July 30 CME near 1 AU, as revealed by wide-angle imaging observations. Connections between imaging observations and in situ …
On 2012 August 2, two CMEs (CME-1 and CME-2) erupted from the west limb of the Sun as viewed from Earth, and were observed in images from the white light coronagraphs on the SOHO and STEREO spacecraft. These events were also observed by the Very Large Array (VLA), which was monitoring the Sun at radio wavelengths, allowing time-dependent Faraday rotation observations to be made of both events. We use the white-light imaging and radio data to model the 3-D field geometry of both CMEs, assuming a magnetic flux rope geometry. For CME-2, we also consider 1 au in situ field measurements in the anal…
Understanding of the kinematic evolution of Coronal Mass Ejections (CMEs) in the heliosphere is important to estimate their arrival time at the Earth. It is found that kinematics of CMEs can change when they interact or collide with each other as they propagate in the heliosphere. In this paper, we analyze the collision and post-interaction characteristics of two Earth-directed CMEs, launched successively on 2012 November 9 and 10, using white light imaging observations from STEREO/SECCHI and in situ observations taken from WIND spacecraft. We tracked two density enhanced features associated w…
The prediction of the arrival time and transit speed of CMEs near the Earth is one of the key problems in understanding the solar terrestrial relationship. Although, STEREO observations now provide a multiple view of CMEs in the heliosphere, the true speeds derived from stereoscopic reconstruction of SECCHI coronagraph data are not quite sufficient in accurate forecasting of arrival time of a majority of CMEs at the Earth. This is due to many factors which change the CME kinematics, like interaction of two or more CMEs or the interaction of CMEs with the pervading solar wind. In order to under…
Predicting the magnetic field within an Earth-directed coronal mass ejection (CME) well before its arrival at Earth is one of the most important issues in space weather research. In this article, we compare the intrinsic flux rope type, i.e. the CME orientation and handedness during eruption, with the in situ flux rope type for 20 CME events that have been uniquely linked from Sun to Earth through heliospheric imaging. Our study shows that the intrinsic flux rope type can be estimated for CMEs originating from different source regions using a combination of indirect proxies. We find that only …
In a case study (June 6-7, 2008) we report on how the internal structure of a coronal mass ejection (CME) at 1 AU can be anticipated from remote observations of white-light images of the heliosphere. Favorable circumstances are the absence of fast equatorial solar wind streams and a low CME velocity which allow us to relate the imaging and in-situ data in a straightforward way. The STEREO-B spacecraft encountered typical signatures of a magnetic flux rope inside an interplanetary CME (ICME) whose axis was inclined at 45 degree to the solar equatorial plane. Various CME direction-finding techni…
Aims.We aim to locate the origin of a stealth coronal mass ejection (CME) detected in situ by the MAG instrument on board Solar Orbiter, and make connections between the CME observed at the Sun, and the interplanetary CME (ICME) measured in situ. Methods. Remote sensing data are analysed using advanced image processing techniques to identify the source region of the stealth CME, and the global magnetic field at the time of the eruption is examined using Potential Field Source Surface (PFSS) models. The observations of the stealth CME at the Sun are compared with the magnetic field measured by …
In this study, we analyze nine CMEs from the Sun to Earth as observed in both the remote sensing and in situ data sets. To date, this is the largest study of Earth impacting CMEs using the multi-view point remote sensing and in situ data. However, the remote sensing and in situ data of the same CME cannot be directly compared. Thus, we use several models to parameterize the two data sets. With the model results, we are able to compare the arrival time, Earth impact speed, internal magnetic field, size and orientation as derived from the remote sensing and in situ methods. From the derived kine…
In situ measurements of ion charge states can provide unique insight into the heating and evolution of coronal mass ejections when tested against realistic non-equilibrium ionization modeling. In this work we investigate the representation of the CME magnetic field as an expanding spheromak configuration, where the plasma heating is prescribed by the choice of anomalous resistivity and the spheromak dynamics. We chose as a test case, the 19 May 2007 CME observed by STEREO and ACE. The spheromak is an appealing physical model, because the location and degree of heating is fixed by the choice of…
Coronal mass ejections (CMEs) are the main driver of Space Weather. Therefore, a precise forecasting of their likely geo-effectiveness relies on an accurate tracking of their morphological and kinematical evolution throughout the interplanetary medium. However, single view-point observations require many assumptions to model the development of the features of CMEs, the most common hypotheses were those of radial propagation and self-similar expansion. The use of different view-points shows that at least for some cases, those assumptions are no longer valid. From radial propagation, typical att…
We analyze the well observed flare-CME event from October 1, 2011 (SOL2011-10-01T09:18) covering the complete chain of action - from Sun to Earth - for a better understanding of the dynamic evolution of the CME and its embedded magnetic field. We study the solar surface and atmosphere associated with the flare-CME from SDO and ground-based instruments, and also track the CME signature off-limb from combined EUV and white-light data with STEREO. By applying 3D reconstruction techniques (GCS, total mass) to stereoscopic STEREO-SoHO coronagraph data, we track the temporal and spatial evolution of…
Understanding the complex morphology of a CME II: how pre-eruptive conditions shape CME evolution
NASA Goddard Space Flight Center（美国宇航局戈达德太空飞行中心）；The Catholic University of America（天主教大学）；The Johns Hopkins University Applied Physics Laboratory（约翰斯·霍普金斯大学应用物理实验室）；Predictive Science Inc.（预测科学公司）；INAF – Capodimonte Astronomical Observatory（意大利国家天体物理研究所卡波迪蒙特天文台）
A Major Geomagnetic Storm in 2024 October Linked to Sympathetic CME--Prominence Eruptions
State Key Laboratory of Solar Activity and Space Weather, National Space Science Center, Chinese Academy of Sciences（中国科学院国家空间科学中心太阳活动与空间天气重点实验室）；School of Astronomy and Space Sciences, University of Chinese Academy of Sciences（中国科学院大学天文与空间科学学院）；Key Laboratory of Space Weather, National Satellite Meteorological Center (National Center for Space Weather), China Meteorological Administration（中国气象局国家卫星气象中心（国家空间天气监测预警中心）空间天气重点实验室）；School of Microelectronics and Physics, Hunan University of Technology and Business（湖南工业大学微电子与物理学院）
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an e…
Using the potential of two unprecedented missions, STEREO and RHESSI, we study three well observed fast CMEs that occurred close to the limb together with their associated high energy flare emissions in terms of RHESSI HXR spectra and flux evolution. From STEREO/EUVI and STEREO/COR1 data the full CME kinematics of the impulsive acceleration phase up to 4 Rs is measured with a high time cadence of less equal 2.5 min. For deriving CME velocity and acceleration we apply and test a new algorithm based on regularization methods. The CME maximum acceleration is achieved at heights h < 0.4 Rs, the pe…
We present an application of the stereoscopic self-similar-expansion model (SSSEM) to Solar Terrestrial Relations Observatory (STEREO)/Sun-Earth Connection Coronal and Heliospheric Investigation (SECCHI) observations of the 03 April 2010 CME and its associated shock. The aim is to verify whether CME-driven shock parameters can be inferred from the analysis of j-maps. For this purpose we use the SSSEM to derive the CME and the shock kinematics. Arrival times and speeds, inferred assuming either propagation at constant speed or with uniform deceleration, show good agreement with Advanced Composi…
In 2010 May 23-24, SDO observed the launch of two successive coronal mass ejections (CMEs), which were subsequently tracked by the SECCHI suite onboard STEREO. Using the COR2 coronagraphs and the heliospheric imagers (HIs), the initial direction of both CMEs is determined to be slightly west of the Sun-Earth line. We derive the CME kinematics, including the evolution of the CME expansion until 0.4 AU. We find that, during the interaction, the second CME decelerates from a speed above 500 km/s to 380 km/s the speed of the leading edge of the first CME. STEREO observes a complex structure compos…
We investigate the source eruption, propagation and expansion characteristics, and heliospheric impacts of the 2020 November 29 coronal mass ejection (CME) and associated shock, using remote sensing and in situ observations from multiple spacecraft. A potential--field source--surface model is employed to examine the coronal magnetic fields surrounding the source region. The CME and associated shock are tracked from the early stage to the outer corona using extreme ultraviolet and white light observations. Forward models are applied to determine the structures and kinematics of the CME and the …
We present the first PSP-observed CME that hits a second spacecraft before the end of the PSP encounter, providing an excellent opportunity to study short-term CME evolution. The CME was launched from the Sun on 10 October 2019 and was measured in situ at PSP on 13 October 2019 and at STEREO-A on 14 October 2019. The small, but not insignificant, radial (~0.15 au) and longitudinal (~8 deg) separation between PSP and STEREO-A at this time allows for observations of both short-term radial evolution as well as investigation of the global CME structure in longitude. Although initially a slow CME, …
We describe a geometric triangulation technique, based on time-elongation maps constructed from imaging observations, to track coronal mass ejections (CMEs) continuously in the heliosphere and predict their impact on the Earth. Taking advantage of stereoscopic imaging observations from STEREO, this technique can determine the propagation direction and radial distance of CMEs from their birth in the corona all the way to 1 AU. The efficacy of the method is demonstrated by its application to the 2008 December 12 CME, which manifests as a magnetic cloud (MC) from in situ measurements at the Earth…
Aims: Our goal is to propagate multiple eruptions - obtained through numerical simulations performed in a previous study - to 1 AU and to analyse the effects of different background solar winds on their dynamics and structure at Earth. We also aim to improve the understanding of why some consecutive eruptions do not result in the expected geoeffectiveness, and how a secondary coronal mass ejection (CME) can affect the configuration of the preceding one. Methods: Using the 2.5D magnetohydrodynamics (MHD) package of the code MPI-AMRVAC, we numerically modeled consecutive CMEs inserted in two dif…
Investigating the heliospheric evolution and consequences of Coronal mass ejections (CMEs) is critical to understanding the solar-terrestrial relationship. For the first time, Heliospheric Imagers (HIs) onboard STEREO, providing multiple views of CMEs in the heliosphere, observed the vast and crucial observational gap between the Sun and the Earth. Using J-maps constructed from coronagraphs (CORs) and HIs observations, we continuously tracked different density enhanced features of CMEs. We implemented several reconstruction methods to estimate the three-dimensional (3D) kinematics of CMEs duri…
In order to have a comprehensive view of the propagation and evolution of coronal mass ejections (CMEs) from the Sun to deep interplanetary space beyond 1 au, we carry out a kinematic analysis of 7 CMEs in solar cycle 23. The events are required to have coordinated coronagraph observations, interplanetary type II radio bursts, and multi-point in-situ measurements at the Earth and Ulysses. A graduated cylindrical shell model, an analytical model without free parameters and a magnetohydrodynamic model are used to derive CME kinematics near the Sun, to quantify the CME/shock propagation in the Su…
Coronal Mass Ejection and Heliospheric Current Sheet Interaction Causing a Long-Duration Magnetic Field Sector Transition
Institute of Physics, University of Graz（格拉茨大学物理研究所）；Department of Physics, University of Helsinki（赫尔辛基大学物理系）；Department of Physics and Astronomy, University of Turku（图尔库大学物理与天文学系）；Hvar Observatory, Faculty of Geodesy, University of Zagreb（萨格勒布大学大地测量学院赫瓦尔天文台）
We investigate how a weak coronal mass ejection (CME) launched on 2016 October 8 without obvious signatures in the low corona produced a relatively intense geomagnetic storm. Remote sensing observations from SDO, STEREO and SOHO and in situ measurements from WIND are employed to track the CME from the Sun to the Earth. Using a graduated cylindrical shell (GCS) model, we estimate the propagation direction and the morphology of the CME near the Sun. CME kinematics are determined from the wide-angle imaging observations of STEREO A and are used to predict the CME arrival time and speed at the Ear…
A Coronal Mass Ejection (CME) is an inhomogeneous structure consisting of different features which evolve differently with the propagation of the CME. Simultaneous heliospheric tracking of different observed features of a CME can improve our understanding about relative forces acting on them. It also helps to estimate accurately their arrival times at the Earth and identify them in in- situ data. This also enables to find association between remotely observed features and in-situ observations near the Earth. In this paper, we attempt to continuously track two density enhanced features, one at …
The prediction of the arrival time for fast coronal mass ejections (CMEs) and their associated shocks is highly desirable in space weather studies. In this paper, we use two shock propagation models, i.e. Data Guided Shock Time Of Arrival (DGSTOA) and Data Guided Shock Propagation Model (DGSPM), to predict the kinematical evolution of interplanetary shocks associated with fast CMEs. DGSTOA is based on the similarity theory of shock waves in the solar wind reference frame, and DGSPM on the non-similarity theory in the stationary reference frame. The inputs are the kinematics of the CME front at…
Validating a Non-conventional Method for Expansion of Coronal Mass Ejections (CMEs) and Investigating the Evolution of a CME Substructures Using Solar Orbiter and Wind Observations
University of Reading（雷丁大学）；Austrian Space Weather Office, GeoSphere Austria（奥地利空间天气办公室，地球系统奥地利）；Indian Institute of Astrophysics（印度天体物理研究所）；Pondicherry University（本地治里大学）
Earlier studies on Coronal Mass Ejections (CMEs), using remote sensing and in situ observations, have attempted to determine some of the internal properties of CMEs, which were limited to a certain position or a certain time. For understanding the evolution of the internal thermodynamic state of CMEs during their heliospheric propagation, we improve the self-similar flux rope internal state (FRIS) model, which is constrained by measured propagation and expansion speed profiles of a CME. We implement the model to a CME erupted on 2008 December 12 and probe the internal state of the CME. It is f…
The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from remote sensing data using 3D reconstructed CME geometry, we can calculate the CME density and compare it with in-situ proton density measurements near Earth. From that we may draw important conclusions…
The determination of the speed of Coronal Mass Ejections (CMEs) is usually done by tracking brighter features (such as the CME front and core) in visible light coronagraphic images and by deriving unidimensional profiles of the CME speed as a function of altitude or time. Nevertheless, CMEs are usually characterized by the presence of significant density inhomogeneities propagating outward with different radial and latitudinal projected speeds, resulting in a complex evolution eventually forming the Interplanetary CME. In this work, we demonstrate for the first time how coronagraphic image seq…
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile …
We present a novel three-dimensional (3D) model of coronal mass ejections (CMEs) that unifies all key evolutionary aspects of CMEs and encapsulates their 3D magnetic field configuration. This fully analytic model is capable of reproducing the global geometrical shape of a CME with all major deformations taken into account, i.e., deflection, rotation, expansion, "pancaking", front flattening and rotational skew. Encapsulation of 3D magnetic structure allows the model to reproduce in-situ measurements of magnetic field for trajectories of spacecraft-CME encounters of any degree of complexity. As…
Coronal mass ejections (CMEs) are a manifestation of the Sun's eruptive nature. They can have a great impact on Earth, but also on human activity in space and on the ground. Therefore, modelling their evolution as they propagate through interplanetary space is essential. EUropean Heliospheric FORecasting Information Asset (EUHFORIA) is a data-driven, physics-based model, tracing the evolution of CMEs through background solar wind conditions. It employs a spheromak flux rope, which provides it with the advantage of reconstructing the internal magnetic field configuration of CMEs. This is someth…
The evolution of the magnetic field and plasma quantities inside a coronal mass ejection (CME) with distance are known from statistical studies using data from 1 au monitors, planetary missions, Helios, and Ulysses. This does not cover the innermost heliosphere, below 0.29 au, where no data are yet publicly available. Here, we describe the evolution of the properties of simulated CMEs in the inner heliosphere using two different initiation mechanisms. We compare the radial evolution of these properties with that found from statistical studies based on observations in the inner heliosphere by H…
We investigate the coronal and interplanetary evolution of a coronal mass ejection (CME) launched on 2010 September 4 from a source region linking two active regions (ARs) 11101 and 11103, using extreme ultraviolet imaging, magnetogram, white-light and in situ observations from SDO, STEREO, SOHO, VEX and Wind. A potential-field source-surface model is employed to examine the configuration of the coronal magnetic field surrounding the source region. The graduated cylindrical shell model and a triangulation method are applied to determine the kinematics of the CME in the corona and interplanetar…
One of the grand challenges in heliophysics is the characterisation of coronal mass ejection (CME) magnetic structure and evolution from eruption at the Sun through heliospheric propagation. At present, the main difficulties are related to the lack of direct measurements of the coronal magnetic fields and the lack of 3D in-situ measurements of the CME body in interplanetary space. Nevertheless, the evolution of a CME magnetic structure can be followed using a combination of multi-point remote-sensing observations and multi-spacecraft in-situ measurements as well as modelling. Accordingly, we p…
Prediction of the effects of coronal mass ejections (CMEs) on Earth strongly depends on knowledge of the interplanetary magnetic field southward component, Bz. Predicting the strength and duration of Bz inside a CME with sufficient accuracy is currently impossible, which forms the so-called Bz problem. Here, we provide a proof-of-concept of a new method for predicting the CME arrival time, speed, Bz and the resulting Dst index at Earth based only on magnetic field data, measured in situ in the inner heliosphere (< 1AU). On 2012 June 12-16, three approximately Earthward-directed and interacting…
A study of the kinematics and arrival times of CMEs at Earth, derived from time-elongation maps (J-maps) constructed from STEREO/Heliospheric Imager (HI) observations, provides an opportunity to understand the heliospheric evolution of CMEs in general. We implement various reconstruction techniques, based on the use of time-elongation profiles of propagating CMEs viewed from single or multiple vantage points, to estimate the dynamics of three geo-effective CMEs. We use the kinematic properties, derived from analysis of the elongation profiles, as inputs to the Drag Based Model for the distance…
Coronal Mass Ejections (CMEs) contributes to the perturbation of solar wind in the heliosphere. Thus, depending on the different phases of the solar cycle and the rate of CME occurrence, contribution of CMEs to solar wind parameters near the Earth changes. In the present study, we examine the long term occurrence rate of CMEs, their speeds, angular widths and masses. We attempt to find correlation between near sun parameters, determined using white light images from coronagraphs, with solar wind measurements near the Earth from in-situ instruments. Importantly, we attempt to find what fraction…
During 2011 February 13 to 15, three Earth-directed CMEs launched in successively were recorded as limb CMEs by coronagraphs (COR) of STEREO. These CMEs provided an opportunity to study their geometrical and kinematic evolution from multiple vantage points. In this paper, we examine the differences in geometrical evolution of slow and fast speed CMEs during their propagation in the heliosphere. We also study their interaction and collision using STEREO/SECCHI COR and Heliospheric Imager (HI) observations. We have found evidence of interaction and collision between the CMEs of February 15 and 1…
A key aim in space weather research is to be able to use remote-sensing observations of the solar atmosphere to extend the lead time of predicting the geoeffectiveness of a coronal mass ejection (CME). In order to achieve this, the magnetic structure of the CME as it leaves the Sun must be known. In this article we address this issue by developing a method to determine the intrinsic flux rope type of a CME solely from solar disk observations. We use several well known proxies for the magnetic helicity sign, the axis orientation, and the axial magnetic field direction to predict the magnetic st…
The fast coronal mass ejection (CME) from 23 July 2012 raised attention due to its extremely short transit time from Sun to 1 AU of less than 21 h. In-situ data from STEREO-A revealed the arrival of a fast forward shock with a speed of more than 2200 km s$^{-1}$ followed by a magnetic structure moving with almost 1900 km s$^{-1}$. We investigate the propagation behavior of the CME shock and magnetic structure with the aim to reproduce the short transit time and high impact speed as derived from in-situ data. We carefully measure the 3D kinematics of the CME using the graduated cylindrical shel…
We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric imagery from STEREO-A and B, we derived two different kinematical profiles for the CME by applying the novel constrained self-similar expansion method. In addition, we used a drag-based model to investigat…
We present a comprehensive analysis of the three-dimensional magnetic flux rope structure generated during the Lynch et al. (2019) magnetohydrodynamic (MHD) simulation of a global-scale, 360 degree-wide streamer blowout coronal mass ejection (CME) eruption. We create both fixed and moving synthetic spacecraft to generate time series of the MHD variables through different regions of the flux rope CME. Our moving spacecraft trajectories are derived from the spatial coordinates of Parker Solar Probe's past encounters 7 and 9 and future encounter 23. Each synthetic time series through the simulati…
A new generation of coronagraphs to study the solar wind and CMEs are being developed and launched. These coronagraphs will heavily rely on multi-channel observations where visible light (VL) and UV-EUV observations provide new plasma diagnostics. One of these instruments, Metis on board ESA-Solar Orbiter, will simultaneously observe VL and the UV Lyman-$α$ line. The number of neutral Hydrogen atoms (a small fraction of coronal protons) is a key parameter for deriving plasma properties such as temperature from the observed Lyman-$α$ line intensity. However, these measurements are significantly…
This paper studies ICMEs detected by both Voyager spacecraft during propagation from 1 to 10 AU, with observations from 1977 to 1980. ICMEs are detected by using several signatures in the in-situ data, the primary one being the low measured to expected proton temperature ratio. We found 21 events common to both spacecraft and study their internal structure in terms of plasma and magnetic field properties. We find that ICMEs are expanding as they propagate outwards, with decreasing density and magnetic field intensities, in agreement with previous studies. We first carry out a statistical study…
