Design of ultra-high gain optical micro-amplifiers via smart non-linear wave mixing

High Power, Continuous-wave Supercontinuum Generation in Highly Nonlinear Fibers Pumped with High Order, Cascaded Raman Fiber Amplifiers

A novel method for efficient generation of high power, equalized continuous-wave supercontinuum source in an all conventional silica fiber architecture is demonstrated. Highly nonlinear fiber (HNLF) is pumped in its anomalous dispersion region using a novel, high power, L-band laser. The L-band laser encompasses a 6th order cascaded Raman amplifier which is pumped with a high power Ytterbium doped fiber laser and amplifies a low-power, tunable L-band seed source. The supercontinuum generated 35W of power with ~40% efficiency. The Supercontinuum spectrum was measured to have a high degree of fl…

Exceeding the Manley-Rowe quantum efficiency limit in an optically pumped THz amplifier

Using a microscopic theory based on the Maxwell-semiconductor Bloch equations, we investigate the possibility of an optically-assisted electrically-driven THz quantum cascade laser. Whereas in optical conversion schemes the power conversion efficiency is limited by the Manley-Rowe relation, the proposed optically-assisted scheme can achieve higher efficiency by coherently recovering the optical pump energy. Furthermore, due to quantum coherence effects the detrimental effects of scattering are mitigated.

基于深度学习的隐形电磁散射放大器

Deep Learning-Enabled Invisible Electromagnetic Scattering Amplifier

本文提出一种基于深度学习的隐形电磁散射放大器，通过电磁仿真与神经网络结合，实现对亚波长目标的散射放大与自身隐形的双重功能，突破传统技术瓶颈。

Characterizing micro-macro transitions with an atomic-vapor-based linear optical amplifier

Fundamentally, the dynamics of micro-macro transitions is instrumental to understanding the process of quantum-to-classical transitions; technologically, it can also facilitate the detection of the microscopic signals in quantum experiments via convenient detectors. Here, we demonstrate a scheme to characterize micro-macro transitions based on a four-wave mixing linear optical amplification process in a hot rubidium vapor. The linear optical amplifier provides a large optical gain of $10^7$ for injected single-photon-level pulses, enabling photon-number-resolving detection by average via non-s…

Low noise amplication of an optically carried microwave signal: application to atom interferometry

In this paper, we report a new scheme to amplify a microwave signal carried on a laser light at $λ$=852nm. The amplification is done via a semiconductor tapered amplifier and this scheme is used to drive stimulated Raman transitions in an atom interferometer. Sideband generation in the amplifier, due to self-phase and amplitude modulation, is investigated and characterized. We also demonstrate that the amplifier does not induce any significant phase-noise on the beating signal. Finally, the degradation of the performances of the interferometer due to the amplification process is shown to be ne…

A photonic integrated circuit based erbium-doped amplifier

Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW output power and more than 30 dB small-signal gain -- on par with commercial fiber amplifiers and beyond state-of-the-art III-V heterogeneously integrated semiconductor amplifiers. We achieve this by app…

Photonic chip-based continuous-travelling-wave parametric amplifier

The ability to amplify optical signals is of pivotal importance across science and technology. The development of optical amplifiers has revolutionized optical communications, which are today pervasively used in virtually all sensing and communication applications of coherent laser sources. In the telecommunication bands, optical amplifiers typically utilize gain media based on III-V semiconductors or rare-earth-doped fibers. Another way to amplify optical signals is to utilize the Kerr nonlinearity of optical fibers or waveguides via parametric processes. Such parametric amplifiers of travell…

Large regenerative parametric amplification on chip at ultra-low pump powers

Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theoretically and experimentally demonstrate a microresonator-assisted regenerative OPA that benefits from the large nonlinearity enhancement of microresonators and yields a high gain in a small footprint. …

An Optical Parametric Amplifier via $ χ^{(2)} $ in AlGaAs Waveguides

We report parametric gain by utilizing $ χ^{(2)} $ non-linearities in a semiconductor Bragg Reflection Waveguide (BRW) waveguide chip. Under the two-mode degenerate type II phase matching, it can be shown that more than 18 dBs of parametric gain for both TE and TM modes is tenable in 100s of micrometers of device length. Polarization insensitive parametric gain can be attained within the 1550 nm region of the spectrum. These AlGaAs BRW waveguides exhibit sub-photon per pulse sensitivity. This is in sharp contrast to other types of parametric gain devices which utilize $ χ^{(3)} $, where the pu…

Three-wave mixing with three incoming waves: Signal-Idler Coherent Cancellation and Gain Enhancement in a Parametric Amplifier

Coherent, purely-dispersive three-wave mixing systems in optics and superconducting microwave circuits can be operated as parametric amplifiers, generating from a pump wave at one frequency amplified signal and idler waves at lower frequencies. Here we demonstrate the reciprocal process using a Josephson amplifier in which coherently imposed signal and idler beams up-convert to the pump frequency. For signal and idler beams strong enough to significantly deplete the pump, we show that this reciprocal process ("coherent cancellation") leads to large, phase-sensitive modulation and even enhancem…

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large-scale sensing. Subject to the highly confined mode and moderate propagation loss, gain and power scaling in such integrated micro-to-nanoscale devices prove to be more challenging compared to their bulk counterparts. In this work, stimulated by the prevalent success of double-cladding optical fiber in high-gain/power operation, a Ta2O5 cladding is employed in the erbium doped lithium …