In order to tackle the challenge of unfavorable weather conditions such as rain and snow, radar is being revisited as a parallel sensing modality to vision and lidar. Recent works have made tremendous progress in applying spinning radar to odometry and place recognition. However, these works have so far ignored the impact of motion distortion and Doppler effects on spinning-radar-based navigation, which may be significant in the self-driving car domain where speeds can be high. In this work, we demonstrate the effect of these distortions on radar odometry using the Oxford Radar RobotCar Dataset and metric localization using our own data-taking platform. We revisit a lightweight estimator that can recover the motion between a pair of radar scans while accounting for both effects. Our conclusion is that both motion distortion and the Doppler effect are significant in different aspects of spinning radar navigation, with the former more prominent than the latter. Code for this project can be found at: https://github.com/keenan-burnett/yeti_radar_odometry
Through constant improvements in recent years radar sensors have become a viable alternative to lidar as the main distancing sensor of an autonomous vehicle. Although robust and with the possibility to directly measure the radial velocity, it brings it's own set of challenges, for which existing algorithms need to be adapted. One core algorithm of a perception system is dynamic occupancy grid mapping, which has traditionally relied on lidar. In this paper we present a dual-weight particle filter as an extension for a Bayesian occupancy grid mapping framework to allow to operate it with radar a…
University of Toronto Institute for Aerospace Studies（多伦多大学航空航天研究所）
This paper presents a model-free, setting-independent method for online detection of dynamic objects in 3D lidar data. We explicitly compensate for the moving-while-scanning operation (motion distortion) of present-day 3D spinning lidar sensors. Our detection method uses a motion-compensated freespace querying algorithm and classifies between dynamic (currently moving) and static (currently stationary) labels at the point level. For a quantitative analysis, we establish a benchmark with motion-distorted lidar data using CARLA, an open-source simulator for autonomous driving research. We also p…
Huazhong University of Science and Technology（华中科技大学）；Wuhan University of Technology（武汉理工大学）；University of Edinburgh（爱丁堡大学）
Automotive mmWave radar has been widely used in the automotive industry due to its small size, low cost, and complementary advantages to optical sensors (e.g., cameras, LiDAR, etc.) in adverse weathers, e.g., fog, raining, and snowing. On the other side, its large wavelength also poses fundamental challenges to perceive the environment. Recent advances have made breakthroughs on its inherent drawbacks, i.e., the multipath reflection and the sparsity of mmWave radar's point clouds. However, the frequency-modulated continuous wave modulation of radar signals makes it more sensitive to vehicles' …
CFEAR-Teach-and-Repeat: Fast and Accurate Radar-only Localization
Chair of Perception for Intelligent Systems, Munich Institute of Robotics and Machine Intelligence, Technical University of Munich（感知智能系统教授团，慕尼黑机器人与机器智能研究所，慕尼黑技术大学）；Robot Navigation and Perception Lab of the AASS Research Center, Örebro University（AASS研究中心机器人导航与感知实验室，奥雷布罗大学）；Bosch Rexroth, Germany（德国博世· Rexroth公司）
