With the increased deployment of IoT and edge devices into commercial and user networks, these devices have become a new threat vector for malware authors. It is imperative to protect these devices as they become more prevalent in commercial and personal networks. However, due to their limited computational power and storage space, especially in the case of battery-powered devices, it is infeasible to deploy state-of-the-art malware detectors onto these systems. In this work, we propose using and extracting features from Markov matrices constructed from opcode traces as a low cost feature for unobfuscated and obfuscated malware detection. We empirically show that our approach maintains a high detection rate while consuming less power than similar work.
With the advent of new technologies, using various formats of digital gadgets is becoming widespread. In today's world, where everyday tasks are inevitable without technology, this extensive use of computers paves the way for malicious activity. As a result, it is important to provide solutions to defend against these threats. Malware is one of the well-known and widely used means utilized for doing destructive activities by malicious attackers. Producing malware from scratch is somewhat difficult, so attackers tend to obfuscate existing malware and prepare it to become an unrecognizable progr…
In this paper, we propose a novel mechanism to normalize metamorphic and obfuscated malware down at the opcode level and hence create an advanced metamorphic malware de-obfuscation and defense system. We name this system DRLDO, for Deep Reinforcement Learning based De-Obfuscator. With the inclusion of the DRLDO as a sub-component, an existing Intrusion Detection System could be augmented with defensive capabilities against 'zero-day' attacks from obfuscated and metamorphic variants of existing malware. This gains importance, not only because there exists no system to date that uses advanced DR…
With the number of new mobile malware instances increasing by over 50\% annually since 2012 [24], malware embedding in mobile apps is arguably one of the most serious security issues mobile platforms are exposed to. While obfuscation techniques are successfully used to protect the intellectual property of apps' developers, they are unfortunately also often used by cybercriminals to hide malicious content inside mobile apps and to deceive malware detection tools. As a consequence, most of mobile malware detection approaches fail in differentiating between benign and obfuscated malicious apps. W…
Traditional techniques to detect malware infections were not meant to be used by the end-user and current malware removal tools and security software cannot handle the heterogeneity of IoT devices. In this paper, we design, develop and evaluate a tool, called NURSE, to fill this information gap, i.e., enabling end-users to detect IoT-malware infections in their home networks. NURSE follows a modular approach to analyze IoT traffic as captured by means of an ARP spoofing technique which does not require any network modification or specific hardware. Thus, NURSE provides zero-configuration IoT t…
Shiraz University of Technology（设拉子理工大学）；University of Surrey（萨里大学）
In recent years, malware detection has become an active research topic in the area of Internet of Things (IoT) security. The principle is to exploit knowledge from large quantities of continuously generated malware. Existing algorithms practice available malware features for IoT devices and lack real-time prediction behaviors. More research is thus required on malware detection to cope with real-time misclassification of the input IoT data. Motivated by this, in this paper we propose an adversarial self-supervised architecture for detecting malware in IoT networks, SETTI, considering samples o…
The widespread adoption of Internet of Things has led to many security issues. Post the Mirai-based DDoS attack in 2016 which compromised IoT devices, a host of new malware using Mirai's leaked source code and targeting IoT devices have cropped up, e.g. Satori, Reaper, Amnesia, Masuta etc. These malware exploit software vulnerabilities to infect IoT devices instead of open TELNET ports (like Mirai) making them more difficult to block using existing solutions such as firewalls. In this research, we present EDIMA, a distributed modular solution which can be used towards the detection of IoT malw…
Shiraz University of Technology（设拉子理工大学）；University of Surrey（萨里大学）；Zhongnan University of Economics and Law（中南财经政法大学）
The volume of malware and the number of attacks in IoT devices are rising everyday, which encourages security professionals to continually enhance their malware analysis tools. Researchers in the field of cyber security have extensively explored the usage of sophisticated analytics and the efficiency of malware detection. With the introduction of new malware kinds and attack routes, security experts confront considerable challenges in developing efficient malware detection and analysis solutions. In this paper, a different view of malware analysis is considered and the risk level of each sampl…
Due to its simple installation and connectivity, the Internet of Things (IoT) is susceptible to malware attacks. Being able to operate autonomously. As IoT devices have become more prevalent, they have become the most tempting targets for malware. Weak, guessable, or hard-coded passwords, and a lack of security measures contribute to these vulnerabilities along with insecure network connections and outdated update procedures. To understand IoT malware, current methods and analysis ,using static methods, are ineffective. The field of deep learning has made great strides in recent years due to t…
University of Central Florida（中佛罗里达大学）；Wayne State University（韦恩州立大学）；Ewha Womans University（梨花女子大学）
The rapid growth of the Internet of Things (IoT) devices is paralleled by them being on the front-line of malicious attacks. This has led to an explosion in the number of IoT malware, with continued mutations, evolution, and sophistication. These malicious software are detected using machine learning (ML) algorithms alongside the traditional signature-based methods. Although ML-based detectors improve the detection performance, they are susceptible to malware evolution and sophistication, making them limited to the patterns that they have been trained upon. This continuous trend motivates the …
With the increase of IoT devices and technologies coming into service, Malware has risen as a challenging threat with increased infection rates and levels of sophistication. Without strong security mechanisms, a huge amount of sensitive data is exposed to vulnerabilities, and therefore, easily abused by cybercriminals to perform several illegal activities. Thus, advanced network security mechanisms that are able of performing a real-time traffic analysis and mitigation of malicious traffic are required. To address this challenge, we are proposing a novel IoT malware traffic analysis approach u…
University of Electronic and Science Technology of China（电子科技大学）；Temple University（天普大学）；University of Idaho（爱达荷大学）
Many IoT(Internet of Things) systems run Android systems or Android-like systems. With the continuous development of machine learning algorithms, the learning-based Android malware detection system for IoT devices has gradually increased. However, these learning-based detection models are often vulnerable to adversarial samples. An automated testing framework is needed to help these learning-based malware detection systems for IoT devices perform security analysis. The current methods of generating adversarial samples mostly require training parameters of models and most of the methods are aim…
Consumer IoT devices may suffer malware attacks, and be recruited into botnets or worse. There is evidence that generic advice to device owners to address IoT malware can be successful, but this does not account for emerging forms of persistent IoT malware. Less is known about persistent malware, which resides on persistent storage, requiring targeted manual effort to remove it. This paper presents a field study on the removal of persistent IoT malware by consumers. We partnered with an ISP to contrast remediation times of 760 customers across three malware categories: Windows malware, non-per…
Internet of Things (IoT) is becoming more frequently used in more applications as the number of connected devices is in a rapid increase. More connected devices result in bigger challenges in terms of scalability, maintainability and most importantly security especially when it comes to 5G networks. The security aspect of IoT devices is an infant field, which is why it is our focus in this paper. Multiple IoT device manufacturers do not consider securing the devices they produce for different reasons like cost reduction or to avoid using energy-harvesting components. Such potentially malicious…
Due to its open-source nature, Android operating system has been the main target of attackers to exploit. Malware creators always perform different code obfuscations on their apps to hide malicious activities. Features extracted from these obfuscated samples through program analysis contain many useless and disguised features, which leads to many false negatives. To address the issue, in this paper, we demonstrate that obfuscation-resilient malware family analysis can be achieved through contrastive learning. The key insight behind our analysis is that contrastive learning can be used to reduc…
Internet of Things devices have seen a rapid growth and popularity in recent years with many more ordinary devices gaining network capability and becoming part of the ever growing IoT network. With this exponential growth and the limitation of resources, it is becoming increasingly harder to protect against security threats such as malware due to its evolving faster than the defence mechanisms can handle with. The traditional security systems are not able to detect unknown malware as they use signature-based methods. In this paper, we aim to address this issue by introducing a novel IoT malwar…
École Polytechnique Fédérale de Lausanne (EPFL)（洛桑联邦理工学院）；University of Murcia（穆尔西亚大学）；University of Zurich UZH（苏黎世大学）；Cyber-Defence Campus, armasuisse Science & Technology（瑞士国防部科技局网络防御校区）
This work investigates the possibilities enabled by federated learning concerning IoT malware detection and studies security issues inherent to this new learning paradigm. In this context, a framework that uses federated learning to detect malware affecting IoT devices is presented. N-BaIoT, a dataset modeling network traffic of several real IoT devices while affected by malware, has been used to evaluate the proposed framework. Both supervised and unsupervised federated models (multi-layer perceptron and autoencoder) able to detect malware affecting seen and unseen IoT devices of N-BaIoT have…
Yangtze Delta Region Institute (Huzhou), University of Electronic Science and Technology of China（电子科技大学长三角研究院（湖州））；International Institute of Next Generation Internet, Macau University of Science and Technology（澳门科技大学下一代互联网国际研究院）；University of Electronic Science and Technology of China（电子科技大学）
The widespread significance of Android IoT devices is due to its flexibility and hardware support features which revolutionized the digital world by introducing exciting applications almost in all walks of daily life, such as healthcare, smart cities, smart environments, safety, remote sensing, and many more. Such versatile applicability gives incentive for more malware attacks. In this paper, we propose a framework which continuously aggregates multiple user trained models on non-overlapping data into single model. Specifically for malware detection task, (i) we propose a novel user (local) n…
Kyushu University（九州大学）；Indian Institute of Technology Delhi（德里印度理工学院）；Royal Holloway University of London（伦敦大学皇家霍洛威学院）
The Internet of Things (IoT) is an extension of the traditional Internet, which allows a very large number of smart devices, such as home appliances, network cameras, sensors and controllers to connect to one another to share information and improve user experiences. Current IoT devices are typically micro-computers for domain-specific computations rather than traditional functionspecific embedded devices. Therefore, many existing attacks, targeted at traditional computers connected to the Internet, may also be directed at IoT devices. For example, DDoS attacks have become very common in IoT e…
The various types of communication technologies and mobility features in Internet of Things (IoT) on the one hand enable fruitful and attractive applications, but on the other hand facilitates malware propagation, thereby raising new challenges on handling IoT-empowered malware for cyber security. Comparing with the malware propagation control scheme in traditional wireless networks where nodes can be directly repaired and secured, in IoT, compromised end devices are difficult to be patched. Alternatively, blocking malware via patching intermediate nodes turns out to be a more feasible and pra…
The growth in the number of Android and Internet of Things (IoT) devices has witnessed a parallel increase in the number of malicious software (malware), calling for new analysis approaches. We represent binaries using their graph properties of the Control Flow Graph (CFG) structure and conduct an in-depth analysis of malicious graphs extracted from the Android and IoT malware to understand their differences. Using 2,874 and 2,891 malware binaries corresponding to IoT and Android samples, we analyze both general characteristics and graph algorithmic properties. Using the CFG as an abstract str…
The main goal of this study is to investigate the robustness of graph-based Deep Learning (DL) models used for Internet of Things (IoT) malware classification against Adversarial Learning (AL). We designed two approaches to craft adversarial IoT software, including Off-the-Shelf Adversarial Attack (OSAA) methods, using six different AL attack approaches, and Graph Embedding and Augmentation (GEA). The GEA approach aims to preserve the functionality and practicality of the generated adversarial sample through a careful embedding of a benign sample to a malicious one. Our evaluations demonstrate…
The upcoming Internet of things (IoT) is foreseen to encompass massive numbers of connected devices, smart objects, and cyber-physical systems. Due to the large-scale and massive deployment of devices, it is deemed infeasible to safeguard 100% of the devices with state-of-the-art security countermeasures. Hence, large-scale IoT has inevitable loopholes for network intrusion and malware infiltration. Even worse, exploiting the high density of devices and direct wireless connectivity, malware infection can stealthily propagate through susceptible (i.e., unsecured) devices and form an epidemic ou…
The lack of security measures among the Internet of Things (IoT) devices and their persistent online connection gives adversaries a prime opportunity to target them or even abuse them as intermediary targets in larger attacks such as distributed denial-of-service (DDoS) campaigns. In this paper, we analyze IoT malware and focus on the endpoints reachable on the public Internet, that play an essential part in the IoT malware ecosystem. Namely, we analyze endpoints acting as dropzones and their targets to gain insights into the underlying dynamics in this ecosystem, such as the affinity between …
Pakistan Institute of Engineering & Applied Sciences（巴基斯坦工程与应用科学研究院）
Interaction between devices, people, and the Internet has given birth to a new digital communication model, the Internet of Things (IoT). The seamless network of these smart devices is the core of this IoT model. However, on the other hand, integrating smart devices to constitute a network introduces many security challenges. These connected devices have created a security blind spot, where cybercriminals can easily launch an attack to compromise the devices using malware proliferation techniques. Therefore, malware detection is considered a lifeline for the survival of IoT devices against cyb…
IoT-based Android Malware Detection Using Graph Neural Network With Adversarial Defense
Department of Computer and Information Sciences, Northumbria University（北安普顿大学计算机与信息科学系）；School of Computing, Engineering & Digital Technologies, Teesside University（泰赛大学计算、工程与数字技术学院）
We present a novel malware detection approach based on metrics over quantitative data flow graphs. Quantitative data flow graphs (QDFGs) model process behavior by interpreting issued system calls as aggregations of quantifiable data flows.Due to the high abstraction level we consider QDFG metric based detection more robust against typical behavior obfuscation like bogus call injection or call reordering than other common behavioral models that base on raw system calls. We support this claim with experiments on obfuscated malware logs and demonstrate the superior obfuscation robustness in compa…
The Linux shell is a command-line interpreter that provides users with a command interface to the operating system, allowing them to perform a variety of functions. Although very useful in building capabilities at the edge, the Linux shell can be exploited, giving adversaries a prime opportunity to use them for malicious activities. With access to IoT devices, malware authors can abuse the Linux shell of those devices to propagate infections and launch large-scale attacks, e.g., DDoS. In this work, we provide a first look at shell commands used in Linux-based IoT malware towards detection. We …
The wide acceptance of Internet of Things (IoT) for both household and industrial applications is accompanied by several security concerns. A major security concern is their probable abuse by adversaries towards their malicious intent. Understanding and analyzing IoT malicious behaviors is crucial, especially with their rapid growth and adoption in wide-range of applications. However, recent studies have shown that machine learning-based approaches are susceptible to adversarial attacks by adding junk codes to the binaries, for example, with an intention to fool those machine learning or deep …
Android malware have been growing at an exponential pace and becomes a serious threat to mobile users. It appears that most of the anti-malware still relies on the signature-based detection system which is generally slow and often not able to detect advanced obfuscated malware. Hence time-to-time various authors have proposed different machine learning solutions to identify sophisticated malware. However, it appears that detection accuracy can be improved by using the clustering method. Therefore in this paper, we propose a novel scalable and effective clustering method to improve the detectio…
