arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2010.06459cond-mat.mes-hallcond-mat.mtrl-sci
收藏

如何解决电子束蒸发过程中电子和带电金属原子发射引起的微米和纳米薄膜问题

How to solve problems in micro- and nanofabrication caused by the emission of electrons and charged metal atoms during e-beam evaporation

Frank Volmer, Inga Seidler, Timo Bisswanger, Jhih-Sian Tu, Lars R. Schreiber, Christoph Stampfer, Bernd Beschoten

摘要:

我们讨论了如何在电子束诱导的物理气相沉积过程中的电子和离子的发射可能会导致在微米和纳米纤维工艺的问题。在给出了一个简短的概述不同类型的辐射从电子束(电子束)蒸发器和辐射量如何取决于不同的沉积参数和条件后,我们突出两个现象更详细:首先,我们讨论了一个无意的阴影蒸发下的抗蚀剂层的底切所造成的一部分的金属蒸汽得到电离的电子碰撞电离。这些离子首先导致样品上的电荷的无意积累,这又导致随后进入的电离金属原子朝向抗蚀剂的底切的静电偏转。其次,我们展示了如何在金属化过程中的低能量次级电子可以导致交联,水泡,和气泡在各自的抗蚀剂层用于定义微米和纳米结构的电子束光刻工艺。在金属沉积之后,交联的抗蚀剂可能导致剥离工艺中的重大问题,并导致器件上的剩余残留物。我们提供了如何最大限度地减少这些影响的故障排除指南,例如,包括电子束的正确对准,避免坩埚中的污染,以及最重要的是,在蒸发室内安装偏转电极。

英文摘要:

We discuss how the emission of electrons and ions during electron-beam-induced physical vapor deposition can cause problems in micro- and nanofabrication processes. After giving a short overview of different types of radiation emitted from an electron-beam (e-beam) evaporator and how the amount of radiation depends on different deposition parameters and conditions, we highlight two phenomena in more detail: First, we discuss an unintentional shadow evaporation beneath the undercut of a resist layer caused by the one part of the metal vapor which got ionized by electron-impact ionization. These ions first lead to an unintentional build-up of charges on the sample, which in turn results in an electrostatic deflection of subsequently incoming ionized metal atoms towards the undercut of the resist. Second, we show how low-energy secondary electrons during the metallization process can cause cross-linking, blisters, and bubbles in the respective resist layer used for defining micro- and nanostructures in an e-beam lithography process. After the metal deposition, the cross-linked resist may lead to significant problems in the lift-off process and causes leftover residues on the device. We provide a troubleshooting guide on how to minimize these effects, which e.g. includes the correct alignment of the e-beam, the avoidance of contaminations in the crucible and, most importantly, the installation of deflector electrodes within the evaporation chamber.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑