准静态弯曲条件下玻璃薄板断裂的相场模拟
Phase-field Fracture Modelling of Thin Monolithic and Laminated Glass Plates under Quasi-static Bending
摘要:
脆性断裂的相场描述采用在四点弯曲分析的单片和夹层玻璃板的报告。我们的目标是:(i)比较应用于薄玻璃板的不同相场断裂公式,(ii)评估问题的降维和网格密度和细化的后果,以及(iii)验证我们最近针对由聚乙烯醇缩丁醛或乙烯-醋酸乙烯酯制成的两种常用聚合物箔得出的准静态加载的时间/温度依赖性材料特性。由于断裂前的非线性响应,典型的广泛使用的Bourdin-Francfort-Marigo模型,可以导致显着高估的薄板弯曲下的响应,数值研究调查两个额外的相场断裂模型提供的应力-应变图的线弹性相。玻璃的临界断裂能和拉伸强度的典型值导致相场长度尺度参数,这在数值模拟中是具有挑战性的解决。因此,我们展示了如何确定关于应用的尺寸减少和相对于板的厚度的长度尺度参数的值的断裂能。比较表明,相场模型提供了非常好的协议与实测应力和夹层玻璃的电阻,尽管事实上,只有一个/两个裂纹本地化使用的准静态分析,而多个裂纹在实验过程中演变。还观察到,部分断裂的层压玻璃的刚度和阻力可以使用具有初始预定义裂纹的2D平面应力模型很好地近似,这提供了比一个玻璃层极限更好的估计。
英文摘要:
A phase-field description of brittle fracture is employed in the reported four-point bending analyses of monolithic and laminated glass plates. Our aims are: (i) to compare different phase-field fracture formulations applied to thin glass plates, (ii) to assess the consequences of the dimensional reduction of the problem and mesh density and refinement, and (iii) to validate for quasi-static loading the time/temperature-dependent material properties we derived recently for two commonly used polymer foils made of Polyvinyl Butyral or Ethylene-Vinyl Acetate. As the nonlinear response prior to fracture, typical of the widely used Bourdin-Francfort-Marigo model, can lead to a significant overestimation of the response of thin plates under bending, the numerical study investigates two additional phase-field fracture models providing the linear elastic phase of the stress-strain diagram. The typical values of the critical fracture energy and tensile strength of glass lead to a phase-field length-scale parameter that is challenging to resolve in the numerical simulations. So, we show how to determine the fracture energy concerning the applied dimensional reduction and the value of the length-scale parameter relative to the thickness of the plate. The comparison shows that the phase-field models provide very good agreement with the measured stresses and resistance of laminated glass, despite the fact that only one/two cracks localised using the quasi-static analysis, whereas multiple cracks evolved during the experiment. It has also been observed that the stiffness and resistance of the partially fractured laminated glass can be well approximated using a 2D plane-stress model with initially predefined cracks, which provides a better estimation than the one-glass-layer limit.}
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。