Device identification is the process of identifying a device on Internet without using its assigned network or other credentials. The sharp rise of usage in Internet of Things (IoT) devices has imposed new challenges in device identification due to a wide variety of devices, protocols and control interfaces. In a network, conventional IoT devices identify each other by utilizing IP or MAC addresses, which are prone to spoofing. Moreover, IoT devices are low power devices with minimal embedded security solution. To mitigate the issue in IoT devices, fingerprint (DFP) for device identification can be used. DFP identifies a device by using implicit identifiers, such as network traffic (or packets), radio signal, which a device used for its communication over the network. These identifiers are closely related to the device hardware and software features. In this paper, we exploit TCP/IP packet header features to create a device fingerprint utilizing device originated network packets. We present a set of three metrics which separate some features from a packet which contribute actively for device identification. To evaluate our approach, we used publicly accessible two datasets. We observed the accuracy of device genre classification 99.37% and 83.35% of accuracy in the identification of an individual device from IoT Sentinel dataset. However, using UNSW dataset device type identification accuracy reached up to 97.78%.
Device identification is one way to secure a network of IoT devices, whereby devices identified as suspicious can subsequently be isolated from a network. In this study, we present a machine learning-based method, IoTDevID, that recognizes devices through characteristics of their network packets. As a result of using a rigorous feature analysis and selection process, our study offers a generalizable and realistic approach to modelling device behavior, achieving high predictive accuracy across two public datasets. The model's underlying feature set is shown to be more predictive than existing f…
University of Bonn（波恩大学）；Fraunhofer Institute for Communication, Information Processing and Ergonomics (FKIE)（弗劳恩霍夫通信、信息处理与人体工程学研究所（FKIE））
Many IoT devices are vulnerable to attacks due to flawed security designs and lacking mechanisms for firmware updates or patches to eliminate the security vulnerabilities. Device-type identification combined with data from vulnerability databases can pinpoint vulnerable IoT devices in a network and can be used to constrain the communications of vulnerable devices for preventing damage. In this contribution, we present and evaluate two deep learning approaches to the reliable IoT device-type identification, namely a recurrent and a convolutional network architecture. Both deep learning approach…
The need for secure Internet of Things (IoT) devices is growing as IoT devices are becoming more integrated into vital networks. Many systems rely on these devices to remain available and provide reliable service. Denial of service attacks against IoT devices are a real threat due to the fact these low power devices are very susceptible to denial-of-service attacks. Machine learning enabled network intrusion detection systems are effective at identifying new threats, but they require a large amount of data to work well. There are many network traffic data sets but very few that focus on IoT ne…
The increasing popularity of specialized Internet-connected devices and appliances, dubbed the Internet-of-Things (IoT), promises both new conveniences and new privacy concerns. Unlike traditional web browsers, many IoT devices have always-on sensors that constantly monitor fine-grained details of users' physical environments and influence the devices' network communications. Passive network observers, such as Internet service providers, could potentially analyze IoT network traffic to infer sensitive details about users. Here, we examine four IoT smart home devices (a Sense sleep monitor, a N…
Deployment of IoT cameras in an organization threatens security and privacy policies, and the classification of network traffic without using IP addresses and port numbers has been challenging. In this paper, we have designed, implemented and deployed a system called iCamInspector to classify network traffic arising from IoT camera in a mixed networking environment. We have collected a total of about 36GB of network traffic containing video data from three different types of applications (four online audio/video conferencing applications, two video sharing applications and six IoT camera from …
The University of New South Wales（新南威尔士大学）；School of Electrical Engineering and Telecommunications（电气与电信工程学院）
Smart homes, enterprises, and cities are increasingly being equipped with a plethora of Internet of Things (IoT), ranging from smart-lights to security cameras. While IoT networks have the potential to benefit our lives, they create privacy and security challenges not seen with traditional IT networks. Due to the lack of visibility, operators of such smart environments are not often aware of their IoT assets, let alone whether each IoT device is functioning properly safe from cyber-attacks. This thesis is the culmination of our efforts to develop techniques to profile the network behavioral pa…
Singapore University of Technology and Design（新加坡科技设计大学）；National University of Singapore（新加坡国立大学）；University of Sydney（悉尼大学）
In this work, we present a lightweight IoT botnet detection solution, EDIMA, which is designed to be deployed at the edge gateway installed in home networks and targets early detection of botnets prior to the launch of an attack. EDIMA includes a novel two-stage Machine Learning (ML)-based detector developed specifically for IoT bot detection at the edge gateway. The ML-based bot detector first employs ML algorithms for aggregate traffic classification and subsequently Autocorrelation Function (ACF)-based tests to detect individual bots. The EDIMA architecture also comprises a malware traffic …
The rapid increase in the use of IoT devices brings many benefits to the digital society, ranging from improved efficiency to higher productivity. However, the limited resources and the open nature of these devices make them vulnerable to various cyber threats. A single compromised device can have an impact on the whole network and lead to major security and physical damages. This paper explores the potential of using network profiling and machine learning to secure IoT against cyber-attacks. The proposed anomaly-based intrusion detection solution dynamically and actively profiles and monitors…
Internet of Things devices have seen a rapid growth and popularity in recent years with many more ordinary devices gaining network capability and becoming part of the ever growing IoT network. With this exponential growth and the limitation of resources, it is becoming increasingly harder to protect against security threats such as malware due to its evolving faster than the defence mechanisms can handle with. The traditional security systems are not able to detect unknown malware as they use signature-based methods. In this paper, we aim to address this issue by introducing a novel IoT malwar…
The number and variety of Internet-connected devices have grown enormously in the past few years, presenting new challenges to security and privacy. Research has shown that network adversaries can use traffic rate metadata from consumer IoT devices to infer sensitive user activities. Shaping traffic flows to fit distributions independent of user activities can protect privacy, but this approach has seen little adoption due to required developer effort and overhead bandwidth costs. Here, we present a Python library for IoT developers to easily integrate privacy-preserving traffic shaping into t…
The consumer Internet of Things (IoT) space has experienced a significant rise in popularity in the recent years. From smart speakers, to baby monitors, and smart kettles and TVs, these devices are increasingly found in households around the world while users may be unaware of the risks associated with owning these devices. Previous work showed that these devices can threaten individuals' privacy and security by exposing information online to a large number of service providers and third party analytics services. Our analysis shows that many of these Internet connections (and the information t…
The growing popularity of Internet-of-Things (IoT) has created the need for network-based traffic anomaly detection systems that could identify misbehaving devices. In this work, we propose a lightweight technique, IoT-guard, for identifying malicious traffic flows. IoT-guard uses semi-supervised learning to distinguish between malicious and benign device behaviours using the network traffic generated by devices. In order to achieve this, we extracted 39 features from network logs and discard any features containing redundant information. After feature selection, fuzzy C-Mean (FCM) algorithm w…
Colgate University（科尔盖特大学）；University of Chicago（芝加哥大学）
Consumer Internet of things research often involves collecting network traffic sent or received by IoT devices. These data are typically collected via crowdsourcing or while researchers manually interact with IoT devices in a laboratory setting. However, manual interactions and crowdsourcing are often tedious, expensive, inaccurate, or do not provide comprehensive coverage of possible IoT device behaviors. We present a new method for generating IoT network traffic using a robotic arm to automate user interactions with devices. This eliminates manual button pressing and enables permutation-base…
Detecting cyber attacks in the network environments used by Internet-of-things (IoT) and preventing them from causing physical perturbations play an important role in delivering dependable services. To achieve this goal, we propose in-network Honeypot based on Software-Defined Networking (SDN) to disrupt and mislead adversaries into exposures while they are in an early stage of preparing an attack. Different from traditional Honeypot requiring dedicated hardware setup, the in-network Honeypot directly reroutes traffic from suspicious nodes and intelligently spoofs the network traffic to them b…
Maintaining IoT Device Identification under Concept Drift via Budget-Aware Traffic Labeling
School of Electrical Engineering and Telecommunications, University of New South Wales（新南威尔士大学电气工程与电信学院）；School of Computer Science and Engineering, University of New South Wales（新南威尔士大学计算机科学与工程学院）；KDDI Research（KDDI研究所）
The various types of communication technologies and mobility features in Internet of Things (IoT) on the one hand enable fruitful and attractive applications, but on the other hand facilitates malware propagation, thereby raising new challenges on handling IoT-empowered malware for cyber security. Comparing with the malware propagation control scheme in traditional wireless networks where nodes can be directly repaired and secured, in IoT, compromised end devices are difficult to be patched. Alternatively, blocking malware via patching intermediate nodes turns out to be a more feasible and pra…
This is the era of smart devices or things which are fueling the growth of Internet of Things (IoT). It is impacting every sphere around us, making our life dependent on this technological feat. It is of high concern that these smart things are being targeted by cyber criminals taking advantage of heterogeneity, minuscule security features and vulnerabilities within these devices. Conventional centralized IT security measures have limitations in terms of scalability and cost. Therefore, these smart devices are required to be monitored closer to their location ideally at the edge of IoT network…
The IoT (Internet of Things) technology has been widely adopted in recent years and has profoundly changed the people's daily lives. However, in the meantime, such a fast-growing technology has also introduced new privacy issues, which need to be better understood and measured. In this work, we look into how private information can be leaked from network traffic generated in the smart home network. Although researchers have proposed techniques to infer IoT device types or user behaviors under clean experiment setup, the effectiveness of such approaches become questionable in the complex but re…
The growing market for smart home IoT devices promises new conveniences for consumers while presenting new challenges for preserving privacy within the home. Many smart home devices have always-on sensors that capture users' offline activities in their living spaces and transmit information about these activities on the Internet. In this paper, we demonstrate that an ISP or other network observer can infer privacy sensitive in-home activities by analyzing Internet traffic from smart homes containing commercially-available IoT devices even when the devices use encryption. We evaluate several st…
It is well known that when IoT traffic is unencrypted it is possible to identify the active devices based on their TCP/IP headers. And when traffic is encrypted, packet-sizes and timings can still be used to do so. To defend against such fingerprinting, traffic padding and shaping were introduced. In this paper we demonstrate that the packet-sizes distribution can still be used to successfully fingerprint the active IoT devices when shaping and padding are used, as long as the adversary is aware that these mitigations are deployed, and even if the values of the padding and shaping parameters a…
Traditional techniques to detect malware infections were not meant to be used by the end-user and current malware removal tools and security software cannot handle the heterogeneity of IoT devices. In this paper, we design, develop and evaluate a tool, called NURSE, to fill this information gap, i.e., enabling end-users to detect IoT-malware infections in their home networks. NURSE follows a modular approach to analyze IoT traffic as captured by means of an ARP spoofing technique which does not require any network modification or specific hardware. Thus, NURSE provides zero-configuration IoT t…
Millions of vulnerable consumer IoT devices in home networks are the enabler for cyber crimes putting user privacy and Internet security at risk. Internet service providers (ISPs) are best poised to play key roles in mitigating risks by automatically inferring active IoT devices per household and notifying users of vulnerable ones. Developing a scalable inference method that can perform robustly across thousands of home networks is a non-trivial task. This paper focuses on the challenges of developing and applying data-driven inference models when labeled data of device behaviors is limited an…
APT traffic detection is an important task in network security domain, which is of great significance in the field of enterprise security. Most APT traffic uses encrypted communication protocol as data transmission medium, which greatly increases the difficulty of detection. This paper analyzes the existing problems of current APT encrypted traffic detection methods based on machine learning, and proposes an APT encrypted traffic detection method based on two parties and multi-session. This method only needs to extract a small amount of features, such as session sequence, session time interval…
Analyzing Consumer IoT Traffic from Security and Privacy Perspectives: a Comprehensive Survey
Key Laboratory of Data and Intelligent System Security, Ministry of Education, China (DISSec)（数据与智能系统安全重点实验室，教育部，中国（DISSec））；Tianjin Key Laboratory of Network and Data Security Technology (NDST)（天津网络与数据安全技术重点实验室（NDST））；College of Cryptology and Cyber Science, Nankai University（密码与网络安全科学学院，南开大学）；DISSec；NDST；College of Computer Science, Nankai University（计算机科学学院，南开大学）；School of Computer Science and Technology, Hangzhou Dianzi University（计算机科学与技术学院，杭州电子科技大学）
The Internet of Things (IoT) is becoming an indispensable part of everyday life, enabling a variety of emerging services and applications. However, the presence of rogue IoT devices has exposed the IoT to untold risks with severe consequences. The first step in securing the IoT is detecting rogue IoT devices and identifying legitimate ones. Conventional approaches use cryptographic mechanisms to authenticate and verify legitimate devices' identities. However, cryptographic protocols are not available in many systems. Meanwhile, these methods are less effective when legitimate devices can be ex…
With the increase of IoT devices and technologies coming into service, Malware has risen as a challenging threat with increased infection rates and levels of sophistication. Without strong security mechanisms, a huge amount of sensitive data is exposed to vulnerabilities, and therefore, easily abused by cybercriminals to perform several illegal activities. Thus, advanced network security mechanisms that are able of performing a real-time traffic analysis and mitigation of malicious traffic are required. To address this challenge, we are proposing a novel IoT malware traffic analysis approach u…
Attack vectors for adversaries have increased in organizations because of the growing use of less secure IoT devices. The risk of attacks on an organization's network has also increased due to the bring your own device (BYOD) policy which permits employees to bring IoT devices onto the premises and attach them to the organization's network. To tackle this threat and protect their networks, organizations generally implement security policies in which only white listed IoT devices are allowed on the organization's network. To monitor compliance with such policies, it has become essential to dist…
Motivated by privacy issues caused by inference attacks on user activities in the packet sizes and timing information of Internet of Things (IoT) network traffic, we establish a rigorous event-level differential privacy (DP) model on infinite packet streams. We propose a memoryless traffic shaping mechanism satisfying a first-come-first-served queuing discipline that outputs traffic dependent on the input using a DP mechanism. We show that in special cases the proposed mechanism recovers existing shapers which standardize the output independently from the input. To find the optimal shapers for…
This paper introduces a method to capture network traffic from medical IoT devices and automatically detect cleartext information that may reveal sensitive medical conditions and behaviors. The research follows a three-step approach involving traffic collection, cleartext detection, and metadata analysis. We analyze four popular consumer medical IoT devices, including one smart medical device that leaks sensitive health information in cleartext. We also present a traffic capture and analysis system that seamlessly integrates with a home network and offers a user-friendly interface for consumer…
The proliferation of smart home Internet of Things (IoT) devices presents unprecedented challenges for preserving privacy within the home. In this paper, we demonstrate that a passive network observer (e.g., an Internet service provider) can infer private in-home activities by analyzing Internet traffic from commercially available smart home devices even when the devices use end-to-end transport-layer encryption. We evaluate common approaches for defending against these types of traffic analysis attacks, including firewalls, virtual private networks, and independent link padding, and find that…
The proliferation of smart home devices has created new opportunities for empirical research in ubiquitous computing, ranging from security and privacy to personal health. Yet, data from smart home deployments are hard to come by, and existing empirical studies of smart home devices typically involve only a small number of devices in lab settings. To contribute to data-driven smart home research, we crowdsource the largest known dataset of labeled network traffic from smart home devices from within real-world home networks. To do so, we developed and released IoT Inspector, an open-source tool…
The growing use of IoT devices in organizations has increased the number of attack vectors available to attackers due to the less secure nature of the devices. The widely adopted bring your own device (BYOD) policy which allows an employee to bring any IoT device into the workplace and attach it to an organization's network also increases the risk of attacks. In order to address this threat, organizations often implement security policies in which only the connection of white-listed IoT devices is permitted. To monitor adherence to such policies and protect their networks, organizations must b…
