arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2008.13205physics.app-phcs.SYeess.SY
收藏

基于沟槽分析的硅大面积飞秒laser铣削

Large-area femtosecond laser milling of silicon employing trench analysis

Arun Bhaskar, Justine Philippe, Flavie Braud, Etienne Okada, Vanessa Avramovic, Jean-François Robillard, Cédric Durand, Daniel Gloria, Christophe Gaquière, Emmanuel Dubois

摘要:

飞秒激光是硅材料微细加工的有力工具。在这项工作中,大面积的晶体硅的激光烧蚀进行了全面的研究,使用脉冲宽度为300 fs的激光源,在两个波长为343 nm和1030 nm。我们开发了一种独特的方法,通过对沟槽的详细分析来深入了解激光铣削工艺。激光刻划沟槽和铣削区域的特征在于使用光学轮廓术提取尺寸和粗糙度参数的准确性和可重复性。在第一步骤中,研究了沟槽的多个测量,包括平均深度、重铸材料的体积、平均纵向轮廓粗糙度、内部沟槽宽度和体积去除率。这允许描绘烧蚀方案和相关特性,从而允许确定能量密度和重复率对激光铣削的影响。在第二步中,进一步阐明了在激光铣削过程中起作用的碎片形成和材料再沉积的其他因素。这些结果被用于加工大面积(高达几毫米2),铣削深度高达200 μm,使腔体的制造具有低表面粗糙度,高去除率高达6.9 μm3 μs-1。最后,激光加工结合XeF 2刻蚀应用于SOI-CMOS技术中的射频(RF)功能站在悬浮膜的制造。性能在不同功能上得到显著改善,如RF开关(二次谐波改善23 dB)、电感器(Q因子接近翻倍)和LNA(噪声系数改善0.1 dB),证明了铣削对射频应用的适用性。

英文摘要:

A femtosecond laser is a powerful tool for micromachining of silicon. In this work, large-area laser ablation of crystalline silicon is comprehensively studied using a laser source of pulse width 300 fs at two wavelengths of 343 nm and 1030 nm. We develop a unique approach to gain insight into the laser milling process by means of detailed analysis of trenches. Laser scribed trenches and milled areas are characterized using optical profilometry to extract dimensional and roughness parameters with accuracy and repeatability. In a first step, multiple measures of the trench including the average depth, the volume of recast material, the average longitudinal profile roughness, the inner trench width and the volume removal rate are studied. This allows for delineation of ablation regimes and associated characteristics allowing to determine the impact of fluence and repetition rate on laser milling. In a second step, additional factors of debris formation and material redeposition that come into play during laser milling are further elucidated. These results are utilized for processing large-area (up to few mm2) with milling depths up to 200 μm to enable the fabrication of cavities with low surface roughness at high removal rates of up to 6.9 μm3 μs-1. Finally, laser processing in combination with XeF2 etching is applied on SOI-CMOS technology in the fabrication of radio-frequency (RF) functions standing on suspended membranes. Performance is considerably improved on different functions like RF switch (23 dB improvement in 2nd harmonic), inductors (near doubling of Q-factor) and LNA (noise figure improvement of 0.1 dB) demonstrating the applicability of milling to radio-frequency applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑