基于层状结构均匀化的泥页岩各向异性粘塑性模型
An anisotropic viscoplasticity model for shale based on layered microstructure homogenization
摘要:
泥页岩的粘塑性变形在许多地下应用中经常观察到。许多研究表明,这种粘塑性行为是各向异性的-具体地说,横向各向同性-并且在微观尺度上与层状复合材料结构密切相关。在这项工作中,我们开发了一个双尺度的页岩本构模型,其中各向异性粘塑性行为自然出现从半解析均匀化的双层微观结构。微观结构被建模为软层和硬层的复合物,软层代表由粘土和有机物形成的韧性基质,硬层对应于由坚硬矿物组成的脆性基质。这种分层的微观结构呈现出各向异性的宏观行为,即使当各个层用各向同性本构律建模时。使用粘土和有机物含量和蠕变幅度之间的共同相关性,我们将粘塑性修正剑桥塑性模型应用于软层,同时将硬层视为线性弹性材料以最大限度地减少校准参数的数量。然后,我们描述了所提出的模型在一个标准的材料更新子程序的实施。该模型与实验室蠕变数据从三个页岩气地层样品进行了验证。我们还通过模拟具有不同层面方向的页岩地层中随时间变化的井眼闭合来展示所提出的模型的计算行为。
英文摘要:
Viscoplastic deformation of shale is frequently observed in many subsurface applications. Many studies have suggested that this viscoplastic behavior is anisotropic---specifically, transversely isotropic---and closely linked to the layered composite structure at the microscale. In this work, we develop a two-scale constitutive model for shale in which anisotropic viscoplastic behavior naturally emerges from semi-analytical homogenization of a bi-layer microstructure. The microstructure is modeled as a composite of soft layers, representing a ductile matrix formed by clay and organics, and hard layers, corresponding to a brittle matrix composed of stiff minerals. This layered microstructure renders the macroscopic behavior anisotropic, even when the individual layers are modeled with isotropic constitutive laws. Using a common correlation between clay and organic content and magnitude of creep, we apply a viscoplastic Modified Cam-Clay plasticity model to the soft layers, while treating the hard layers as a linear elastic material to minimize the number of calibration parameters. We then describe the implementation of the proposed model in a standard material update subroutine. The model is validated with laboratory creep data on samples from three gas shale formations. We also demonstrate the computational behavior of the proposed model through simulation of time-dependent borehole closure in a shale formation with different bedding plane directions.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。