Anions generally associate more favorably with the air-water interface than cations. In addition to solute size and polarizability, the intrinsic structure of the unperturbed interface has been discussed as an important contributor to this bias. Here we assess quantitatively the role that intrinsic charge asymmetry of water's surface plays in ion adsorption, using computer simulations to compare model solutes of various size and charge. In doing so, we also evaluate the degree to which linear response theory for solvent polarization is a reasonable approach for comparing the thermodynamics of bulk and interfacial ion solvation. Consistent with previous works on bulk ion solvation, we find that the average electrostatic potential at the center of a neutral, sub-nanometer solute at the air-water interface depends sensitively on its radius, and that this potential changes quite nonlinearly as the solute's charge is introduced. The nonlinear response closely resembles that of the bulk. As a result, the net nonlinearity of ion adsorption is weaker than in bulk, but still substantial, comparable to the apparent magnitude of macroscopically nonlocal contributions from the undisturbed interface. For the simple-point-charge model of water we study, these results argue distinctly against rationalizing ion adsorption in terms of surface potentials inherent to molecular structure of the liquid's boundary.
We demonstrate that the driving forces for ion adsorption to the air-water interface for point charge models results from both cavitation and a term that is of the form of a negative electrochemical surface potential. We carefully characterize the role of the free energy due to the electrochemical surface potential computed from simple empirical models and its role in ionic adsorption within the context of dielectric continuum theory. Our research suggests that the electrochemical surface potential due to point charge models provides anions with a significant driving force to the air-water int…
Self-assembly structures of gemini surfactants are characterized, among others, for their low CMC. This characteristic could be due to great hydrophobic parts in their molecular structures. That availability could imply great stability of self-assembly structures or monolayers absorbed in an interface. The micellization behavior of two cationic gemini surfactants, α,ω-bis(S-alkyl dimethylammonium) alkane bromides, were studied by a modelization of dynamic surface tension (DST) experimental data and isothermal titration calorimetry (ITC) measurements. The adsorption data at the air/water interf…
The behavior at the air/water interface of multilamellar tubes made of the ethanolamine salt of the 12-hydroxy stearic acid as a function of the temperature has been investigated using Neutron Reflectivity. Those tubes are known to exhibit a temperature tunable diameter in the bulk. We have observed multilamellar tubes adsorbed at the air/water interface by specular neutron reflectivity. Interestingly, at the interface, the adsorbed tubes exhibit the same behavior than in the bulk upon heating. There is however a peculiar behavior at around 50\degree for which the increase of the diameter of t…
Nanofilms of thickness of about two nanometers have been formed at the air-water interface using functionalized castor oil (ICO) with cross-linkable silylated groups. These hybrid films represent excellent candidates for replacing conventional polymeric materials in biomedical applications, but they need to be optimized in terms of biocompatibility which is highly related to protein adsorption. Neutron reflectivity has been used to study the adsorption of two model proteins, bovine serum albumin and lysozyme, at the silylated oil (ICO)-water interface in the absence and presence of salt at phy…
Using surface-tension measurements, we study the brush-limited adsorption dynamics of a range of amphiphilic polymers, PAAH-$α$-$\textrm{C}_n$ composed of a poly(acrylic acid) backbone, PAAH, grafted with a fraction $α$ of alkyl moieties, containing either $n=8$ or $n=12$ carbon atoms, at pH conditions where the PAAH backbone is not charged. At short times, the surface tension decreases more sharply as the degree of grafting increases while at long times, the adsorption dynamics becomes logarithmic in time and is slower as the degree of grafting increases. This logarithmic behavior at long tim…
Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers of controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations. We find that t…
Chemistry occurring at or near the surfaces of aqueous droplets and thin films in the atmosphere influences air quality and climate. Molecular dynamics simulations are becoming increasingly useful for gaining atomic-scale insight into the structure and reactivity of aqueous interfaces in the atmosphere. Here we review simulation studies of atmospherically relevant aqueous liquid-air interfaces, with an emphasis on ions that play important roles in the chemistry of atmospheric aerosols. In addition to surveying results from simulation studies, we discuss challenges to the refinement and experim…
We have studied both experimentally and theoretically the surface pressure isotherms of copolymers of polystyrene-polyethyleneoxide (PS-PEO) at the air-water interface. The SCMF (single chain mean-field) theory provides a very good agreement with the experiments for the entire range of surface densities and shows that the adsorption energy per PEO monomer at the air-water interface is about one $k_B T$. In addition, the chain density profile has been calculated for a variety of surface densities, from the dilute to the very dense ones. The SCMF approach has been complemented by a mean-field ap…
The adsorption at the interface between an aqueous solution of several surface-active agents and another fluid (air or oil) phase is addressed theoretically. We derive the kinetic equations from a variation of the interfacial free energy, solve them numerically and provide an analytic solution for the simple case of a linear adsorption isotherm. Calculating asymptotic solutions analytically, we find the characteristic time scales of the adsorption process and observe the behavior of the system at various temporal stages. In particular, we relate the kinetic behavior of the mixture to the prope…
The effervescence and the stability of the ring of fine bubbles crowning the surface of a champagne glass, the "collar", constitute one of the hallmarks of Champagne. Defects in the stability of this collar are not well understood and account for a significant proportion of bottle return. This study aims to better understand the surface properties of champagne wine such that the foaming properties can be controlled more effectively. Early studies on Champagne foaming properties using the "Mosalux" measurement of the foam level formed by air flow in champagne through fritted glass pointed to a …
Hypothesis: As a fluid approaches three phase coexistence, adsorption may take place by the successive formation of two intervening wetting films. The equilibrium thickness of these wetting layers is the result of a delicate balance of intermolecular forces, as dictated by an underlying interface potential. The van der Waals forces for the two variable adsorption layers may be formulated exactly from Dzyaloshinskii-Lifshitz-Pitaevskii theory, and analytical approximations may be derived that extent well beyond the validity of conventional Hamaker theory. Calculations: We consider the adsorptio…
Hypothesis: A broad range of phenomena, such as emulsification and emulsion stability, foam formation or liquid evaporation, are closely related to the dynamics of adsorbing colloidal particles. Elucidation of the mechanisms implied is key to a correct design of many different types of materials. Experiments: Microspheres forced to rotate near a fluid interface exhibit a roto-translational hydrodynamic mechanism that is hindered by capillary torques as soon as the particles protrude the interface. Under these conditions, the time evolution in the ratio of moving spheres provides a direct descr…
The Jones-Ray effect is an anomalous minimum in the surface tension of aqueous electrolytes at millimolar salt concentrations. We experimentally demonstrated that intentionally added ionic surfactants induce the Jones-Ray effect. The one-dimensional Poisson-Boltzmann theory, including the effect of surfactant adsorption and salt depletion, excellently agrees with the obtained experimental data. All the parameters of the ion-specific surface affinities used in the theory are consistent with previous experiments. These results strongly suggest that the Jones-Ray effect observed so far has been i…
There is currently a renewed interest for improving household and personal care formulations to provide more environment friendly products. Fabric conditioners used as softeners have to fulfill a number of stability and biodegradability requirements. They should also display significant adsorption on cotton in the conditions of use. The quantification of surfactant adsorption remains however difficult because the fabric woven structure is complex and deposited amounts are generally small. Here we propose a method to evaluate cellulose/sur-factant interactions with increased detection sensitivi…
We present a simple, unified theory for the self-energy of an ion near a dielectric interface. Our theory accounts for both the short-range (solvation) and long-range (image force) electrostatic forces, charge polarization induced by these forces, and the cavity energy. In contrast to previous models, our self energy is continuous across the interface and thus applicable to both the water and air (oil) sides of the interface. With no fitting parameters, we predict the specific ion effect on the interfacial affinity of halogen anions at the water/air interface, and the strong adsorption of hydr…
Protein fibril accumulation at interfaces is an important step in many physiological processes and neurodegenerative diseases as well as in designing materials. Here we show, using $β$-lactoglobulin fibrils as a model, that semiflexible fibrils exposed to a surface do not possess the Gaussian distribution of curvatures characteristic for wormlike chains, but instead exhibit a spontaneous curvature, which can even lead to ring-like conformations. The long-lived presence of such rings is confirmed by atomic force microscopy, cryogenic scanning electron microscopy and passive probe particle track…
In this work, we addressed the effects of Y$^{3+}$ and Nd$^{3+}$ cations on the adsorption of the whey protein $β$-lactoglobulin (BLG) at air-water interfaces as a function of electrolyte concentration. Both cations caused very similar but dramatic changes at the interface and in the bulk solution. Here, measurements of the electropho-retic mobility and vibrational sum-frequency generation spectroscopy (SFG) were applied and consistently showed a reversal of the BLG net charge at remarkably low ion concentrations of 30 (bulk) and 40 (interface) $μ$M of Y$^{3+}$ or Nd$^{3+}$ for a BLG concentra…
We present a realization of a fast interfacial Marangoni microswimmer by a half-spherical alginate capsule at the air-water interface, which diffusively releases water-soluble spreading molecules (weak surfactants such as polyethylene glycol (PEG)), which act as "fuel" by modulating the air-water interfacial tension. For a number of different fuels, we can observe symmetry breaking and spontaneous propulsion although the alginate particle and emission are isotropic. The propulsion mechanism is similar to soap or camphor boats, which are, however, typically asymmetric in shape or emission to se…
The structure of the transient layer at the interface between air and the aqueous solution of silica nanoparticles with the size distribution of particles that has been determined from small-angle scattering has been studied by the X-ray reflectometry method. The reconstructed depth profile of the polarizability of the substance indicates the presence of a structure consisting of several layers of nanoparticles with the thickness that is more than twice as large as the thickness of the previously described structure. The adsorption of 1,2-distearoyl-sn-glycero-3-phosphocholine molecules at the…
In a recent publication, we have highlighted the potential of phosphonic acid terminated PEG oligomers to functionalize strong UV absorption cerium oxide nanoparticles[1], which yield suspensions that are stable in aqueous or organic solvents and are redispersible in different solvent after freeze-drying. In the present work, we highlight the interfacial activity of the functional ceria nanoparticles and their potential to modify hydrophobic surfaces. We first investigated Phosphonated-PEG amphiphilic oligomers behavior as strong surface active species forming irreversibly adsorbed layers. We …
