arXivDaily arXiv每日学术速递 周一至周五更新
北美退伍军人节(Veterans Day),12 日无更新
arXiv 2007.13295eess.SP
收藏

空中智能反射面:三维波束展平的节点布置与无源波束形成设计

Aerial Intelligent Reflecting Surface: Joint Placement and Passive Beamforming Design with 3D Beam Flattening

Haiquan Lu, Yong Zeng, Shi Jin, Rui Zhang

摘要:

本文提出了一种新的三维(3D)无线无源中继系统,使空中IRS(AIRS)。与传统的地面IRS相比,AIRS具有更大的部署灵活性以及更宽范围的信号反射,这要归功于其高海拔,从而更有可能与地面源/目的地节点建立视距(LoS)链路。具体而言,我们的目标是最大限度地提高最坏情况下的信噪比(SNR)在目标区域的所有位置,通过联合优化源节点和位置的发射波束成形以及三维被动波束成形的AIRS。公式化的问题是非凸的,因此难以解决。为了获得有用的见解,我们首先考虑的特殊情况下,最大限度地提高信噪比在一个给定的目标位置,最佳的解决方案是在封闭的形式。结果表明,最佳水平AIRS布局仅取决于源-目的地距离与AIRS高度的比值。然后,对于启用AIRS的区域覆盖的一般情况下,我们提出了一种有效的解决方案,通过解耦AIRS无源波束形成设计,以最大限度地提高最坏情况下的阵列增益,从其布局优化,通过平衡所产生的角度跨度和级联的通道路径损耗。我们提出的解决方案是基于一种新的3D波束展宽和平坦化技术,其中的AIRS的无源阵列被划分为适当大小的子阵列,其相移被设计成形成一个平坦的波束图案与可调的波束宽度迎合覆盖区域的大小。在我们的设计中,我们考虑了基于均匀线阵和基于均匀平面阵的两种阵列天线,分别实现了二维和三维无源波束形成。数值结果表明,所提出的设计取得了显着的性能增益的基准计划。

英文摘要:

This paper proposes a new three-dimensional (3D) wireless passive relaying system enabled by aerial IRS (AIRS). Compared to the conventional terrestrial IRS, AIRS enjoys more deployment flexibility as well as wider-range signal reflection, thanks to its high altitude and thus more likelihood of establishing line-of-sight (LoS) links with ground source/destination nodes. Specifically, we aim to maximize the worst-case signal-to-noise ratio (SNR) over all locations in a target area by jointly optimizing the transmit beamforming for the source node and the placement as well as 3D passive beamforming for the AIRS. The formulated problem is non-convex and thus difficult to solve. To gain useful insights, we first consider the special case of maximizing the SNR at a given target location, for which the optimal solution is obtained in closed-form. The result shows that the optimal horizontal AIRS placement only depends on the ratio between the source-destination distance and the AIRS altitude. Then for the general case of AIRS-enabled area coverage, we propose an efficient solution by decoupling the AIRS passive beamforming design to maximize the worst-case array gain, from its placement optimization by balancing the resulting angular span and the cascaded channel path loss. Our proposed solution is based on a novel 3D beam broadening and flattening technique, where the passive array of the AIRS is divided into sub-arrays of appropriate size, and their phase shifts are designed to form a flattened beam pattern with adjustable beamwidth catering to the size of the coverage area. Both the uniform linear array (ULA)-based and uniform planar array (UPA)-based AIRSs are considered in our design, which enable two-dimensional (2D) and 3D passive beamforming, respectively. Numerical results show that the proposed designs achieve significant performance gains over the benchmark schemes.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑