This paper tackles the unsupervised depth estimation task in indoor environments. The task is extremely challenging because of the vast areas of non-texture regions in these scenes. These areas could overwhelm the optimization process in the commonly used unsupervised depth estimation framework proposed for outdoor environments. However, even when those regions are masked out, the performance is still unsatisfactory. In this paper, we argue that the poor performance suffers from the non-discriminative point-based matching. To this end, we propose P$^2$Net. We first extract points with large local gradients and adopt patches centered at each point as its representation. Multiview consistency loss is then defined over patches. This operation significantly improves the robustness of the network training. Furthermore, because those textureless regions in indoor scenes (e.g., wall, floor, roof, \etc) usually correspond to planar regions, we propose to leverage superpixels as a plane prior. We enforce the predicted depth to be well fitted by a plane within each superpixel. Extensive experiments on NYUv2 and ScanNet show that our P$^2$Net outperforms existing approaches by a large margin. Code is available at \url{https://github.com/svip-lab/Indoor-SfMLearner}.
Robotics, TCS Research \& Innovation, Kolkata, India
Autonomous Micro Aerial Vehicles (MAVs) gained tremendous attention in recent years. Autonomous flight in indoor requires a dense depth map for navigable space detection which is the fundamental component for autonomous navigation. In this paper, we address the problem of reconstructing dense depth while a drone is hovering (small camera motion) in indoor scenes using already estimated cameras and sparse point cloud obtained from a vSLAM. We start by segmenting the scene based on sudden depth variation using sparse 3D points and introduce a patch-based local plane fitting via energy minimizati…
Camera motion estimation is a key technique for 3D scene reconstruction and Simultaneous localization and mapping (SLAM). To make it be feasibly achieved, previous works usually assume slow camera motions, which limits its usage in many real cases. We propose an end-to-end 3D reconstruction system which combines color, depth and inertial measurements to achieve robust reconstruction with fast sensor motions. Our framework extends Kalman filter to fuse the three kinds of information and involve an iterative method to jointly optimize feature correspondences, camera poses and scene geometry. We …
Beijing Jiaotong University（北京交通大学）；Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）
Existing panoramic depth estimation methods based on convolutional neural networks (CNNs) focus on removing panoramic distortions, failing to perceive panoramic structures efficiently due to the fixed receptive field in CNNs. This paper proposes the panorama transformer (named PanoFormer) to estimate the depth in panorama images, with tangent patches from spherical domain, learnable token flows, and panorama specific metrics. In particular, we divide patches on the spherical tangent domain into tokens to reduce the negative effect of panoramic distortions. Since the geometric structures are es…
$\mathrm{F^2Depth}$: Self-supervised Indoor Monocular Depth Estimation via Optical Flow Consistency and Feature Map Synthesis
Institute of Artificial Intelligence, Beihang University（北京航空航天大学人工智能研究院）；Qingdao Research Institute of Beihang University（北京航空航天大学青岛研究院）；School of Automation Science and Electrical Engineering, Beihang University（北京航空航天大学自动化科学与电气工程学院）
University of Twente（特文特大学）；Technical University of Brunswick（布伦瑞克工业大学）
Airborne laser scanning and photogrammetry are two main techniques to obtain 3D data representing the object surface. Due to the high cost of laser scanning, we want to explore the potential of using point clouds derived by dense image matching (DIM), as effective alternatives to laser scanning data. We present a framework to evaluate point clouds from dense image matching and derived Digital Surface Models (DSM) based on automatically extracted sample patches. Dense matching error and noise level are evaluated quantitatively at both the local level and whole block level. Experiments show that…
Indian Institute of Technology Bombay（印度理工学院孟买分校）；New York University（纽约大学）；Mercedes-Benz Research and Development India Pvt. Ltd.（梅赛德斯-奔驰印度研发私人有限公司）
We propose a convolutional neural network (ConvNet) based approach for learning local image descriptors which can be used for significantly improved patch matching and 3D reconstructions. A multi-resolution ConvNet is used for learning keypoint descriptors. We also propose a new dataset consisting of an order of magnitude more number of scenes, images, and positive and negative correspondences compared to the currently available Multi-View Stereo (MVS) [18] dataset. The new dataset also has better coverage of the overall viewpoint, scale, and lighting changes in comparison to the MVS dataset. …
2D3D-MATR: 2D-3D Matching Transformer for Detection-free Registration between Images and Point Clouds
National University of Defense Technology（国防科技大学）；Defense Innovation Institute, Academy of Military Sciences（军事科学院国防科技创新研究院）；Sun Yat-sen University（中山大学）
Neural Radiance Fields (NeRF) achieve photo-realistic view synthesis with densely captured input images. However, the geometry of NeRF is extremely under-constrained given sparse views, resulting in significant degradation of novel view synthesis quality. Inspired by self-supervised depth estimation methods, we propose StructNeRF, a solution to novel view synthesis for indoor scenes with sparse inputs. StructNeRF leverages the structural hints naturally embedded in multi-view inputs to handle the unconstrained geometry issue in NeRF. Specifically, it tackles the texture and non-texture regions…
MRIo3DS-Net: A Mutually Reinforcing Images to 3D Surface RNN-like framework for model-adaptation indoor 3D reconstruction
Central China Normal University（华中师范大学）；Hainan Surveying and Mapping Product Quality Supervision and Inspection Station, MNR（自然资源部海南测绘产品质量监督检验站）；Wuhan University（武汉大学）
We present a simple but yet effective method for learning distinctive 3D local deep descriptors (DIPs) that can be used to register point clouds without requiring an initial alignment. Point cloud patches are extracted, canonicalised with respect to their estimated local reference frame and encoded into rotation-invariant compact descriptors by a PointNet-based deep neural network. DIPs can effectively generalise across different sensor modalities because they are learnt end-to-end from locally and randomly sampled points. Because DIPs encode only local geometric information, they are robust t…
Learning-based multi-view stereo (MVS) has gained fine reconstructions on popular datasets. However, supervised learning methods require ground truth for training, which is hard to be collected, especially for the large-scale datasets. Though nowadays unsupervised learning methods have been proposed and have gotten gratifying results, those methods still fail to reconstruct intact results in challenging scenes, such as weakly-textured surfaces, as those methods primarily depend on pixel-wise photometric consistency which is subjected to various illuminations. To alleviate matching ambiguity in…
Zhejiang University（浙江大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；National Engineering Research Center of Optical Instrumentation, Zhejiang University（浙江大学国家光学仪器工程技术研究中心）
Depth estimation, as a necessary clue to convert 2D images into the 3D space, has been applied in many machine vision areas. However, to achieve an entire surrounding 360-degree geometric sensing, traditional stereo matching algorithms for depth estimation are limited due to large noise, low accuracy, and strict requirements for multi-camera calibration. In this work, for a unified surrounding perception, we introduce panoramic images to obtain larger field of view. We extend PADENet first appeared in our previous conference work for outdoor scene understanding, to perform panoramic monocular …
Indoor scenes typically exhibit complex, spatially-varying appearance from global illumination, making inverse rendering a challenging ill-posed problem. This work presents an end-to-end, learning-based inverse rendering framework incorporating differentiable Monte Carlo raytracing with importance sampling. The framework takes a single image as input to jointly recover the underlying geometry, spatially-varying lighting, and photorealistic materials. Specifically, we introduce a physically-based differentiable rendering layer with screen-space ray tracing, resulting in more realistic specular …
Vision is one of the most important of the senses, and humans use it extensively during navigation. We evaluated different types of image and video frame descriptors that could be used to determine distinctive visual landmarks for localizing a person based on what is seen by a camera that they carry. To do this, we created a database containing over 3 km of video-sequences with ground-truth in the form of distance travelled along different corridors. Using this database, the accuracy of localization - both in terms of knowing which route a user is on - and in terms of position along a certain …
Normandie Univ（诺曼底大学）；UNICAEN（卡昂大学）；ENSICAEN（卡昂国立高等工程师学院）；CNRS -- UMR GREYC（法国国家科学研究中心——GREYC联合研究单位）
Multimodal patch matching addresses the problem of finding the correspondences between image patches from two different modalities, e.g. RGB vs sketch or RGB vs near-infrared. The comparison of patches of different modalities can be done by discovering the information common to both modalities (Siamese like approaches) or the modality-specific information (Pseudo-Siamese like approaches). We observed that none of these two scenarios is optimal. This motivates us to propose a three-stream architecture, dubbed as TS-Net, combining the benefits of the two. In addition, we show that adding extra c…
This paper presents the experimental comparison of fourteen stereo matching algorithms in variant illumination conditions. Different adaptations of global and local stereo matching techniques are chosen for evaluation The variant strength and weakness of the chosen correspondence algorithms are explored by employing the methodology of the prediction error strategy. The algorithms are gauged on the basis of their performance on real world data set taken in various indoor lighting conditions and at different times of the day
Shandong University（山东大学）；Shandong Jianzhu University（山东建筑大学）；the Second Hospital of Shandong University（山东大学第二医院）
Digital image inpainting is an interpolation problem, inferring the content in the missing (unknown) region to agree with the known region data such that the interpolated result fulfills some prior knowledge. Low-rank and nonlocal self-similarity are two important priors for image inpainting. Based on the nonlocal self-similarity assumption, an image is divided into overlapped square target patches (submatrices) and the similar patches of any target patch are reshaped as vectors and stacked into a patch matrix. Such a patch matrix usually enjoys a property of low rank or approximately low rank…
School of Information Science and Engineering, Shandong University（山东大学信息科学与工程学院）；College of Geomatics, Shandong University of Science and Technology（山东科技大学测绘学院）；Shenzhen Research Institute, Shandong University（山东大学深圳研究院）；School of Control Science and Engineering, Shandong University（山东大学控制科学与工程学院）
In deep learning-based local stereo matching methods, larger image patches usually bring better stereo matching accuracy. However, it is unrealistic to increase the size of the image patch size without restriction. Arbitrarily extending the patch size will change the local stereo matching method into the global stereo matching method, and the matching accuracy will be saturated. We simplified the existing Siamese convolutional network by reducing the number of network parameters and propose an efficient CNN based structure, namely Adaptive Deconvolution-based disparity matching Net (ADSM net) …
Measuring the similarity between patches in images is a fundamental building block in various tasks. Naturally, the patch-size has a major impact on the matching quality, and on the consequent application performance. We try to use large patches instead of relatively small patches so that each patch contains more information. We use different feature extraction mechanisms to extract the features of each individual image patches which forms a feature matrix and find out the nearest neighbor patches in the image. The nearest patches are calculated using two different nearest neighbor algorithms …
One major goal of vision is to infer physical models of objects, surfaces, and their layout from sensors. In this paper, we aim to interpret indoor scenes from one RGBD image. Our representation encodes the layout of walls, which must conform to a Manhattan structure but is otherwise flexible, and the layout and extent of objects, modeled with CAD-like 3D shapes. We represent both the visible and occluded portions of the scene, producing a complete 3D parse. Such a scene interpretation is useful for robotics and visual reasoning, but difficult to produce due to the well-known challenge of segm…
Feature extraction plays an important role in visual localization. Unreliable features on dynamic objects or repetitive regions will interfere with feature matching and challenge indoor localization greatly. To address the problem, we propose a novel network, RaP-Net, to simultaneously predict region-wise invariability and point-wise reliability, and then extract features by considering both of them. We also introduce a new dataset, named OpenLORIS-Location, to train the proposed network. The dataset contains 1553 images from 93 indoor locations. Various appearance changes between images of th…
Visual relocalization has been a widely discussed problem in 3D vision: given a pre-constructed 3D visual map, the 6 DoF (Degrees-of-Freedom) pose of a query image is estimated. Relocalization in large-scale indoor environments enables attractive applications such as augmented reality and robot navigation. However, appearance changes fast in such environments when the camera moves, which is challenging for the relocalization system. To address this problem, we propose a virtual view synthesis-based approach, RenderNet, to enrich the database and refine poses regarding this particular scenario.…
Princeton University（普林斯顿大学）；Stanford University（斯坦福大学）；Technical University of Munich（慕尼黑工业大学）
Access to large, diverse RGB-D datasets is critical for training RGB-D scene understanding algorithms. However, existing datasets still cover only a limited number of views or a restricted scale of spaces. In this paper, we introduce Matterport3D, a large-scale RGB-D dataset containing 10,800 panoramic views from 194,400 RGB-D images of 90 building-scale scenes. Annotations are provided with surface reconstructions, camera poses, and 2D and 3D semantic segmentations. The precise global alignment and comprehensive, diverse panoramic set of views over entire buildings enable a variety of supervi…
Why and How: Knowledge-Guided Learning for Cross-Spectral Image Patch Matching
Chinese Academy of Sciences（中国科学院）；Shenyang Institute of Automation, Chinese Academy of Sciences（中国科学院沈阳自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）；The Chinese University of Hong Kong（香港中文大学）
Technical University of Munich（慕尼黑工业大学）；Google（谷歌）
In this work, we introduce the task of 3D object instance re-localization (RIO): given one or multiple objects in an RGB-D scan, we want to estimate their corresponding 6DoF poses in another 3D scan of the same environment taken at a later point in time. We consider RIO a particularly important task in 3D vision since it enables a wide range of practical applications, including AI-assistants or robots that are asked to find a specific object in a 3D scene. To address this problem, we first introduce 3RScan, a novel dataset and benchmark, which features 1482 RGB-D scans of 478 environments acro…
Local feature matching is a computationally intensive task at the subpixel level. While detector-based methods coupled with feature descriptors struggle in low-texture scenes, CNN-based methods with a sequential extract-to-match pipeline, fail to make use of the matching capacity of the encoder and tend to overburden the decoder for matching. In contrast, we propose a novel hierarchical extract-and-match transformer, termed as MatchFormer. Inside each stage of the hierarchical encoder, we interleave self-attention for feature extraction and cross-attention for feature matching, yielding a huma…
Kuaishou Technology（快手科技）；SIGS, Tsinghua University（清华大学深圳国际研究生院）；Peng Cheng National Laboratory（鹏城国家实验室）
This paper proposes a novel video inpainting method. We make three main contributions: First, we extended previous Transformers with patch alignment by introducing Deformed Patch-based Homography (DePtH), which improves patch-level feature alignments without additional supervision and benefits challenging scenes with various deformation. Second, we introduce Mask Pruning-based Patch Attention (MPPA) to improve patch-wised feature matching by pruning out less essential features and using saliency map. MPPA enhances matching accuracy between warped tokens with invalid pixels. Third, we introduce…
IIIT Hyderabad（海得拉巴国际信息技术研究所）；Queensland University of Technology（昆士兰科技大学）
Significant advances have been made recently in Visual Place Recognition (VPR), feature correspondence, and localization due to the proliferation of deep-learning-based methods. However, existing approaches tend to address, partially or fully, only one of two key challenges: viewpoint change and perceptual aliasing. In this paper, we present novel research that simultaneously addresses both challenges by combining deep-learned features with geometric transformations based on reasonable domain assumptions about navigation on a ground-plane, whilst also removing the requirement for specialized h…
To super-resolve the through-plane direction of a multi-slice 2D magnetic resonance (MR) image, its slice selection profile can be used as the degeneration model from high resolution (HR) to low resolution (LR) to create paired data when training a supervised algorithm. Existing super-resolution algorithms make assumptions about the slice selection profile since it is not readily known for a given image. In this work, we estimate a slice selection profile given a specific image by learning to match its internal patch distributions. Specifically, we assume that after applying the correct slice …
Moscow Institute of Physics and Technology（莫斯科物理技术学院）；AIRI (Artificial Intelligence Research Institute)（AIRI（人工智能研究院））；LLC Integrant（Integrant有限责任公司）；Federal Research Center “Computer Science and Control” of the Russian Academy of Sciences（俄罗斯科学院“计算机科学与控制”联邦研究中心）
We present a novel dataset named as HPointLoc, specially designed for exploring capabilities of visual place recognition in indoor environment and loop detection in simultaneous localization and mapping. The loop detection sub-task is especially relevant when a robot with an on-board RGB-D camera can drive past the same place (``Point") at different angles. The dataset is based on the popular Habitat simulator, in which it is possible to generate photorealistic indoor scenes using both own sensor data and open datasets, such as Matterport3D. To study the main stages of solving the place recogn…
German Research Center for Artificial Intelligence (DFKI)（德国人工智能研究中心（DFKI））；University of Kaiserslautern（凯泽斯劳滕大学）
Learning based approaches have not yet achieved their full potential in optical flow estimation, where their performance still trails heuristic approaches. In this paper, we present a CNN based patch matching approach for optical flow estimation. An important contribution of our approach is a novel thresholded loss for Siamese networks. We demonstrate that our loss performs clearly better than existing losses. It also allows to speed up training by a factor of 2 in our tests. Furthermore, we present a novel way for calculating CNN based features for different image scales, which performs bette…
Recent years have seen flourishing research on both semi-supervised learning and 3D room layout reconstruction. In this work, we explore the intersection of these two fields to advance the research objective of enabling more accurate 3D indoor scene modeling with less labeled data. We propose the first approach to learn representations of room corners and boundaries by using a combination of labeled and unlabeled data for improved layout estimation in a 360-degree panoramic scene. Through extensive comparative experiments, we demonstrate that our approach can advance layout estimation of compl…
