In the majority of object detection frameworks, the confidence of instance classification is used as the quality criterion of predicted bounding boxes, like the confidence-based ranking in non-maximum suppression (NMS). However, the quality of bounding boxes, indicating the spatial relations, is not only correlated with the classification scores. Compared with the region proposal network (RPN) based detectors, single-shot object detectors suffer the box quality as there is a lack of pre-selection of box proposals. In this paper, we aim at single-shot object detectors and propose a location-aware anchor-based reasoning (LAAR) for the bounding boxes. LAAR takes both the location and classification confidences into consideration for the quality evaluation of bounding boxes. We introduce a novel network block to learn the relative location between the anchors and the ground truths, denoted as a localization score, which acts as a location reference during the inference stage. The proposed localization score leads to an independent regression branch and calibrates the bounding box quality by scoring the predicted localization score so that the best-qualified bounding boxes can be picked up in NMS. Experiments on MS COCO and PASCAL VOC benchmarks demonstrate that the proposed location-aware framework enhances the performances of current anchor-based single-shot object detection frameworks and yields consistent and robust detection results.
University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Microsoft（微软）
In this paper, we propose a general approach to optimize anchor boxes for object detection. Nowadays, anchor boxes are widely adopted in state-of-the-art detection frameworks. However, these frameworks usually pre-define anchor box shapes in heuristic ways and fix the sizes during training. To improve the accuracy and reduce the effort of designing anchor boxes, we propose to dynamically learn the anchor shapes, which allows the anchors to automatically adapt to the data distribution and the network learning capability. The learning approach can be easily implemented with stochastic gradient d…
Most state-of-the-art object detection systems follow an anchor-based diagram. Anchor boxes are densely proposed over the images and the network is trained to predict the boxes position offset as well as the classification confidence. Existing systems pre-define anchor box shapes and sizes and ad-hoc heuristic adjustments are used to define the anchor configurations. However, this might be sub-optimal or even wrong when a new dataset or a new model is adopted. In this paper, we study the problem of automatically optimizing anchor boxes for object detection. We first demonstrate that the number…
We motivate and present feature selective anchor-free (FSAF) module, a simple and effective building block for single-shot object detectors. It can be plugged into single-shot detectors with feature pyramid structure. The FSAF module addresses two limitations brought up by the conventional anchor-based detection: 1) heuristic-guided feature selection; 2) overlap-based anchor sampling. The general concept of the FSAF module is online feature selection applied to the training of multi-level anchor-free branches. Specifically, an anchor-free branch is attached to each level of the feature pyramid…
This paper is about few-shot instance segmentation, where training and test image sets do not share the same object classes. We specify and evaluate a new few-shot anchor-free part-based instance segmenter FAPIS. Our key novelty is in explicit modeling of latent object parts shared across training object classes, which is expected to facilitate our few-shot learning on new classes in testing. We specify a new anchor-free object detector aimed at scoring and regressing locations of foreground bounding boxes, as well as estimating relative importance of latent parts within each box. Also, we spe…
Queen’s University（女王大学）；Ingenuity Labs Research Institute（创新实验室研究所）
We present ObjectBox, a novel single-stage anchor-free and highly generalizable object detection approach. As opposed to both existing anchor-based and anchor-free detectors, which are more biased toward specific object scales in their label assignments, we use only object center locations as positive samples and treat all objects equally in different feature levels regardless of the objects' sizes or shapes. Specifically, our label assignment strategy considers the object center locations as shape- and size-agnostic anchors in an anchor-free fashion, and allows learning to occur at all scales…
Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
We introduce a novel single-shot object detector to ease the imbalance of foreground-background class by suppressing the easy negatives while increasing the positives. To achieve this, we propose an Anchor Promotion Module (APM) which predicts the probability of each anchor as positive and adjusts their initial locations and shapes to promote both the quality and quantity of positive anchors. In addition, we design an efficient Feature Alignment Module (FAM) to extract aligned features for fitting the promoted anchors with the help of both the location and shape transformation information from…
In computer vision, object detection is one of most important tasks, which underpins a few instance-level recognition tasks and many downstream applications. Recently one-stage methods have gained much attention over two-stage approaches due to their simpler design and competitive performance. Here we propose a fully convolutional one-stage object detector (FCOS) to solve object detection in a per-pixel prediction fashion, analogue to other dense prediction problems such as semantic segmentation. Almost all state-of-the-art object detectors such as RetinaNet, SSD, YOLOv3, and Faster R-CNN rely…
We propose a novel and flexible anchor mechanism named MetaAnchor for object detection frameworks. Unlike many previous detectors model anchors via a predefined manner, in MetaAnchor anchor functions could be dynamically generated from the arbitrary customized prior boxes. Taking advantage of weight prediction, MetaAnchor is able to work with most of the anchor-based object detection systems such as RetinaNet. Compared with the predefined anchor scheme, we empirically find that MetaAnchor is more robust to anchor settings and bounding box distributions; in addition, it also shows the potential…
Tohoku University（东北大学）；RIKEN Center for AIP（理化学研究所人工智能中心）
The employment of convolutional neural networks has led to significant performance improvement on the task of object detection. However, when applying existing detectors to continuous frames in a video, we often encounter momentary miss-detection of objects, that is, objects are undetected exceptionally at a few frames, although they are correctly detected at all other frames. In this paper, we analyze the mechanism of how such miss-detection occurs. For the most popular class of detectors that are based on anchor boxes, we show the followings: i) besides apparent causes such as motion blur, o…
CEA LIST（法国原子能与替代能源委员会信息与技术实验室）；Sorbonne University（索邦大学）；CNRS（法国国家科学研究中心）；Institute for Intelligent Systems and Robotics（智能系统与机器人研究所）
Recently, several deep learning models have been proposed for 3D human pose estimation. Nevertheless, most of these approaches only focus on the single-person case or estimate 3D pose of a few people at high resolution. Furthermore, many applications such as autonomous driving or crowd analysis require pose estimation of a large number of people possibly at low-resolution. In this work, we present PandaNet (Pose estimAtioN and Dectection Anchor-based Network), a new single-shot, anchor-based and multi-person 3D pose estimation approach. The proposed model performs bounding box detection and, f…
University of Kansas（堪萨斯大学）；Kansas State University（堪萨斯州立大学）；Toronto Metropolitan University（多伦多都会大学）
Label assignment plays a significant role in modern object detection models. Detection models may yield totally different performances with different label assignment strategies. For anchor-based detection models, the IoU (Intersection over Union) threshold between the anchors and their corresponding ground truth bounding boxes is the key element since the positive samples and negative samples are divided by the IoU threshold. Early object detectors simply utilize the fixed threshold for all training samples, while recent detection algorithms focus on adaptive thresholds based on the distribut…
ByteDance AI Lab（字节跳动人工智能实验室）；Tsinghua University（清华大学）；University of Pennsylvania（宾夕法尼亚大学）
We present FoveaBox, an accurate, flexible, and completely anchor-free framework for object detection. While almost all state-of-the-art object detectors utilize predefined anchors to enumerate possible locations, scales and aspect ratios for the search of the objects, their performance and generalization ability are also limited to the design of anchors. Instead, FoveaBox directly learns the object existing possibility and the bounding box coordinates without anchor reference. This is achieved by: (a) predicting category-sensitive semantic maps for the object existing possibility, and (b) pro…
Northwestern Polytechnical University（西北工业大学）；Zhengzhou Institute of Surveying and Mapping（郑州测绘学院）
Oriented object detection is a practical and challenging task in remote sensing image interpretation. Nowadays, oriented detectors mostly use horizontal boxes as intermedium to derive oriented boxes from them. However, the horizontal boxes are inclined to get small Intersection-over-Unions (IoUs) with ground truths, which may have some undesirable effects, such as introducing redundant noise, mismatching with ground truths, detracting from the robustness of detectors, etc. In this paper, we propose a novel Anchor-free Oriented Proposal Generator (AOPG) that abandons horizontal box-related oper…
National Research University Higher School of Economics（国立研究型大学高等经济学院）；Yandex
In this paper, we consider the task of one-shot object detection, which consists in detecting objects defined by a single demonstration. Differently from the standard object detection, the classes of objects used for training and testing do not overlap. We build the one-stage system that performs localization and recognition jointly. We use dense correlation matching of learned local features to find correspondences, a feed-forward geometric transformation model to align features and bilinear resampling of the correlation tensor to compute the detection score of the aligned features. All the c…
In object detection, determining which anchors to assign as positive or negative samples, known as anchor assignment, has been revealed as a core procedure that can significantly affect a model's performance. In this paper we propose a novel anchor assignment strategy that adaptively separates anchors into positive and negative samples for a ground truth bounding box according to the model's learning status such that it is able to reason about the separation in a probabilistic manner. To do so we first calculate the scores of anchors conditioned on the model and fit a probability distribution …
This paper presents Mask-aware Intersection-over-Union (maIoU) for assigning anchor boxes as positives and negatives during training of instance segmentation methods. Unlike conventional IoU or its variants, which only considers the proximity of two boxes; maIoU consistently measures the proximity of an anchor box with not only a ground truth box but also its associated ground truth mask. Thus, additionally considering the mask, which, in fact, represents the shape of the object, maIoU enables a more accurate supervision during training. We present the effectiveness of maIoU on a state-of-the-…
We propose a fully convolutional one-stage object detector (FCOS) to solve object detection in a per-pixel prediction fashion, analogue to semantic segmentation. Almost all state-of-the-art object detectors such as RetinaNet, SSD, YOLOv3, and Faster R-CNN rely on pre-defined anchor boxes. In contrast, our proposed detector FCOS is anchor box free, as well as proposal free. By eliminating the predefined set of anchor boxes, FCOS completely avoids the complicated computation related to anchor boxes such as calculating overlapping during training. More importantly, we also avoid all hyper-paramet…
Sun Yat-sen University（中山大学）；University of Waterloo（滑铁卢大学）
Accurate and fast 3D object detection from point clouds is a key task in autonomous driving. Existing one-stage 3D object detection methods can achieve real-time performance, however, they are dominated by anchor-based detectors which are inefficient and require additional post-processing. In this paper, we eliminate anchors and model an object as a single point--the center point of its bounding box. Based on the center point, we propose an anchor-free CenterNet3D network that performs 3D object detection without anchors. Our CenterNet3D uses keypoint estimation to find center points and direc…
International Digital Economy Academy (IDEA)（国际数字经济研究院（IDEA））；The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；The Hong Kong University of Science and Technology（香港科技大学）；Tsinghua University（清华大学）
We present DINO (\textbf{D}ETR with \textbf{I}mproved de\textbf{N}oising anch\textbf{O}r boxes), a state-of-the-art end-to-end object detector. % in this paper. DINO improves over previous DETR-like models in performance and efficiency by using a contrastive way for denoising training, a mixed query selection method for anchor initialization, and a look forward twice scheme for box prediction. DINO achieves $49.4$AP in $12$ epochs and $51.3$AP in $24$ epochs on COCO with a ResNet-50 backbone and multi-scale features, yielding a significant improvement of $\textbf{+6.0}$\textbf{AP} and $\textbf…
Bounding-box regression is a popular technique to refine or predict localization boxes in recent object detection approaches. Typically, bounding-box regressors are trained to regress from either region proposals or fixed anchor boxes to nearby bounding boxes of a pre-defined target object classes. This paper investigates whether the technique is generalizable to unseen classes and is transferable to other tasks beyond supervised object detection. To this end, we propose a class-agnostic and anchor-free box regressor, dubbed Universal Bounding-Box Regressor (UBBR), which predicts a bounding bo…
Chinese Academy of Sciences（中国科学院）；Shenyang Institute of Automation, Chinese Academy of Sciences（中国科学院沈阳自动化研究所）；Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences（中国科学院机器人与智能制造创新研究院）；University of Chinese Academy of Sciences（中国科学院大学）；McGill University（麦吉尔大学）；Trip.com Group（携程集团）
Among current anchor-based detectors, a positive anchor box will be intuitively assigned to the object that overlaps it the most. The assigned label to each anchor will directly determine the optimization direction of the corresponding prediction box, including the direction of box regression and category prediction. In our practice of crowded object detection, however, the results show that a positive anchor does not always regress toward the object that overlaps it the most when multiple objects overlap. We name it anchor drift. The anchor drift reflects that the anchor-object matching relat…
Oriented object detection in aerial images is a challenging task as the objects in aerial images are displayed in arbitrary directions and are usually densely packed. Current oriented object detection methods mainly rely on two-stage anchor-based detectors. However, the anchor-based detectors typically suffer from a severe imbalance issue between the positive and negative anchor boxes. To address this issue, in this work we extend the horizontal keypoint-based object detector to the oriented object detection task. In particular, we first detect the center keypoints of the objects, based on whi…
Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）；Georgia Tech Shenzhen Institute, Tianjin University（天津大学佐治亚理工深圳学院）；Sun Yat-sen University（中山大学）；Futurewei Technologies（未来技术公司）；Tsinghua University（清华大学）
Most state-of-the-art instance-level human parsing models adopt two-stage anchor-based detectors and, therefore, cannot avoid the heuristic anchor box design and the lack of analysis on a pixel level. To address these two issues, we have designed an instance-level human parsing network which is anchor-free and solvable on a pixel level. It consists of two simple sub-networks: an anchor-free detection head for bounding box predictions and an edge-guided parsing head for human segmentation. The anchor-free detector head inherits the pixel-like merits and effectively avoids the sensitivity of hyp…
Vanderbilt University Medical Center（范德堡大学医学中心）；Vanderbilt University（范德堡大学）；PAII Inc.（PAII公司）
Object detection networks are powerful in computer vision, but not necessarily optimized for biomedical object detection. In this work, we propose CircleNet, a simple anchor-free detection method with circle representation for detection of the ball-shaped glomerulus. Different from the traditional bounding box based detection method, the bounding circle (1) reduces the degrees of freedom of detection representation, (2) is naturally rotation invariant, (3) and optimized for ball-shaped objects. The key innovation to enable this representation is the anchor-free framework with the circle detect…
Recently, logo detection has received more and more attention for its wide applications in the multimedia field, such as intellectual property protection, product brand management, and logo duration monitoring. Unlike general object detection, logo detection is a challenging task, especially for small logo objects and large aspect ratio logo objects in the real-world scenario. In this paper, we propose a novel approach, named Discriminative Semantic Feature Pyramid Network with Guided Anchoring (DSFP-GA), which can address these challenges via aggregating the semantic information and generatin…
CBSR & NLPR, Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所模式识别国家重点实验室与北方激光技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）；GE Global Research（通用电气全球研究院）
For object detection, the two-stage approach (e.g., Faster R-CNN) has been achieving the highest accuracy, whereas the one-stage approach (e.g., SSD) has the advantage of high efficiency. To inherit the merits of both while overcoming their disadvantages, in this paper, we propose a novel single-shot based detector, called RefineDet, that achieves better accuracy than two-stage methods and maintains comparable efficiency of one-stage methods. RefineDet consists of two inter-connected modules, namely, the anchor refinement module and the object detection module. Specifically, the former aims to…
Microsoft Research Asia（微软亚洲研究院）；Peking University（北京大学）
A recent approach for object detection and human pose estimation is to regress bounding boxes or human keypoints from a central point on the object or person. While this center-point regression is simple and efficient, we argue that the image features extracted at a central point contain limited information for predicting distant keypoints or bounding box boundaries, due to object deformation and scale/orientation variation. To facilitate inference, we propose to instead perform regression from a set of points placed at more advantageous positions. This point set is arranged to reflect a good …
Label assignment has been widely studied in general object detection because of its great impact on detectors' performance. However, none of these works focus on label assignment in dense pedestrian detection. In this paper, we propose a simple yet effective assigning strategy called Loss-aware Label Assignment (LLA) to boost the performance of pedestrian detectors in crowd scenarios. LLA first calculates classification (cls) and regression (reg) losses between each anchor and ground-truth (GT) pair. A joint loss is then defined as the weighted summation of cls and reg losses as the assigning …
Most deep learning object detectors are based on the anchor mechanism and resort to the Intersection over Union (IoU) between predefined anchor boxes and ground truth boxes to evaluate the matching quality between anchors and objects. In this paper, we question this use of IoU and propose a new anchor matching criterion guided, during the training phase, by the optimization of both the localization and the classification tasks: the predictions related to one task are used to dynamically assign sample anchors and improve the model on the other task, and vice versa. Despite the simplicity of the…
Electronics and Telecommunications Research Institute (ETRI)（韩国电子通信研究院）；Korea Advanced Institute of Science and Technology (KAIST)（韩国科学技术院）
Since many safety-critical systems, such as surgical robots and autonomous driving cars operate in unstable environments with sensor noise and incomplete data, it is desirable for object detectors to take the localization uncertainty into account. However, there are several limitations of the existing uncertainty estimation methods for anchor-based object detection. 1) They model the uncertainty of the heterogeneous object properties with different characteristics and scales, such as location (center point) and scale (width, height), which could be difficult to estimate. 2) They model box offs…
TU Darmstadt（达姆施塔特工业大学）；Hessian Center for AI and Centre for Cognitive Science（黑森人工智能中心与认知科学中心）
We present DAFNe, a Dense one-stage Anchor-Free deep Network for oriented object detection. As a one-stage model, it performs bounding box predictions on a dense grid over the input image, being architecturally simpler in design, as well as easier to optimize than its two-stage counterparts. Furthermore, as an anchor-free model, it reduces the prediction complexity by refraining from employing bounding box anchors. With DAFNe we introduce an orientation-aware generalization of the center-ness function for arbitrarily oriented bounding boxes to down-weight low-quality predictions and a center-t…
We present a bottom-up approach for the task of object instance segmentation using a single-shot model. The proposed model employs a fully convolutional network which is trained to predict class-wise segmentation masks as well as the bounding boxes of the object instances to which each pixel belongs. This allows us to group object pixels into individual instances. Our network architecture is based on the DeepLabv3+ model, and requires only minimal extra computation to achieve pixel-wise instance assignments. We apply our method to the task of person instance segmentation, a common task relevan…
Beijing University of Posts and Telecommunications（北京邮电大学）；School of Information and Communication Engineering（信息与通信工程学院）；Beijing Key Laboratory of Network System and Network Culture（北京市网络系统与网络文化重点实验室）
For the training of face detection network based on R-CNN framework, anchors are assigned to be positive samples if intersection-over-unions (IoUs) with ground-truth are higher than the first threshold(such as 0.7); and to be negative samples if their IoUs are lower than the second threshold(such as 0.3). And the face detection model is trained by the above labels. However, anchors with IoU between first threshold and second threshold are not used. We propose a novel training strategy, Precise Box Score(PBS), to train object detection models. The proposed training strategy uses the anchors wit…
Ant Group（蚂蚁集团）；Tsinghua University（清华大学）；Alibaba Group（阿里巴巴集团）
Usually, it is difficult to determine the scale and aspect ratio of anchors for anchor-based object detection methods. Current state-of-the-art object detectors either determine anchor parameters according to objects' shape and scale in a dataset, or avoid this problem by utilizing anchor-free methods, however, the former scheme is dataset-specific and the latter methods could not get better performance than the former ones. In this paper, we propose a novel anchor augmentation method named AADI, which means Augmenting Anchors by the Detector Itself. AADI is not an anchor-free method, instead,…
Tsinghua University（清华大学）；Microsoft Research Asia（微软亚洲研究院）；Peking University（北京大学）
Modern object detectors rely heavily on rectangular bounding boxes, such as anchors, proposals and the final predictions, to represent objects at various recognition stages. The bounding box is convenient to use but provides only a coarse localization of objects and leads to a correspondingly coarse extraction of object features. In this paper, we present \textbf{RepPoints} (representative points), a new finer representation of objects as a set of sample points useful for both localization and recognition. Given ground truth localization and recognition targets for training, RepPoints learn to…
School of Automation, Beijing Institute of Technology（北京理工大学自动化学院）
Arbitrary-oriented objects widely appear in natural scenes, aerial photographs, remote sensing images, etc., thus arbitrary-oriented object detection has received considerable attention. Many current rotation detectors use plenty of anchors with different orientations to achieve spatial alignment with ground truth boxes, then Intersection-over-Union (IoU) is applied to sample the positive and negative candidates for training. However, we observe that the selected positive anchors cannot always ensure accurate detections after regression, while some negative samples can achieve accurate localiz…
With the recent development of Semi-Supervised Object Detection (SS-OD) techniques, object detectors can be improved by using a limited amount of labeled data and abundant unlabeled data. However, there are still two challenges that are not addressed: (1) there is no prior SS-OD work on anchor-free detectors, and (2) prior works are ineffective when pseudo-labeling bounding box regression. In this paper, we present Unbiased Teacher v2, which shows the generalization of SS-OD method to anchor-free detectors and also introduces Listen2Student mechanism for the unsupervised regression loss. Speci…
This paper introduces a new real-time object detection approach named Yes-Net. It realizes the prediction of bounding boxes and class via single neural network like YOLOv2 and SSD, but owns more efficient and outstanding features. It combines local information with global information by adding the RNN architecture as a packed unit in CNN model to form the basic feature extractor. Independent anchor boxes coming from full-dimension k-means is also applied in Yes-Net, it brings better average IOU than grid anchor box. In addition, instead of NMS, Yes-Net uses RNN as a filter to get the final box…
A standard one-stage detector is comprised of two tasks: classification and regression. Anchors of different shapes are introduced for each location in the feature map to mitigate the challenge of regression for multi-scale objects. However, the performance of classification can degrade due to the highly class-imbalanced problem in anchors. Recently, many anchor-free algorithms have been proposed to classify locations directly. The anchor-free strategy benefits the classification task but can lead to sup-optimum for the regression task due to the lack of prior bounding boxes. In this work, we …
The anchor-based detectors handle the problem of scale variation by building the feature pyramid and directly setting different scales of anchors on each cell in different layers. However, it is difficult for box-wise anchors to guide the adaptive learning of scale-specific features in each layer because there is no one-to-one correspondence between box-wise anchors and pixel-level features. In order to alleviate the problem, in this paper, we propose a scale-customized weak segmentation (SCWS) block at the pixel level for scale customized object feature learning in each layer. By integrating …
Most current detection methods have adopted anchor boxes as regression references. However, the detection performance is sensitive to the setting of the anchor boxes. A proper setting of anchor boxes may vary significantly across different datasets, which severely limits the universality of the detectors. To improve the adaptivity of the detectors, in this paper, we present a novel dimension-decomposition region proposal network (DeRPN) that can perfectly displace the traditional Region Proposal Network (RPN). DeRPN utilizes an anchor string mechanism to independently match object widths and h…
National University of Defense Technology（国防科技大学）；Inception Institute of Artificial Intelligence（人工智能初探研究所）
Object detection generally requires sliding-window classifiers in tradition or anchor box based predictions in modern deep learning approaches. However, either of these approaches requires tedious configurations in boxes. In this paper, we provide a new perspective where detecting objects is motivated as a high-level semantic feature detection task. Like edges, corners, blobs and other feature detectors, the proposed detector scans for feature points all over the image, for which the convolution is naturally suited. However, unlike these traditional low-level features, the proposed detector go…
Universiti Teknologi Brunei（文莱达鲁萨兰大学）；National Institute of Information and Communications Technology（信息通信研究机构）；CLEALINKTECHNOLOGY Co., Ltd.（CLEALINK科技有限公司）
The ultimate goal of a baby detection task concerns detecting the presence of a baby and other objects in a sequence of 2D images, tracking them and understanding the semantic contents of the scene. Recent advances in deep learning and computer vision offer various powerful tools in general object detection and can be applied to a baby detection task. In this paper, the Faster Region-based Convolutional Neural Network and the Single-Shot Multi-Box Detection approaches are explored. They are the two state-of-the-art object detectors based on the region proposal tactic and the multi-box tactic. …
School of Artificial Intelligence, Xidian University（西安电子科技大学人工智能学院）
Existing anchor-base oriented object detection methods have achieved amazing results, but these methods require some manual preset boxes, which introduces additional hyperparameters and calculations. The existing anchor-free methods usually have complex architectures and are not easy to deploy. Our goal is to propose an algorithm which is simple and easy-to-deploy for aerial image detection. In this paper, we present a one-stage anchor-free rotated object detector (FCOSR) based on FCOS, which can be deployed on most platforms. The FCOSR has a simple architecture consisting of only convolution …
Huazhong University of Science and Technology（华中科技大学）
For most of the anchor-based detectors, Intersection over Union(IoU) is widely utilized to assign targets for the anchors during training. However, IoU pays insufficient attention to the closeness of the anchor's center to the truth box's center. This results in two problems: (1) only one anchor is assigned to most of the slender objects which leads to insufficient supervision information for the slender objects during training and the performance on the slender objects is hurt; (2) IoU can not accurately represent the alignment degree between the receptive field of the feature at the anchor's…
Skeleton-Guided Sparse Anchors for Rotated Instance Segmentation in Cell Microscopy
Aier Institute of Digital Ophthalmology and Visual Science（爱尔数字眼科学与视觉科学研究所）；Changsha Aier Eye Hospital（长沙爱尔眼科医院）；Shanghai Jiao Tong University（上海交通大学）；Nanyang Technological University（南洋理工大学）；Obstetrics and Gynecology Hospital, Institute of Reproduction and Development, Fudan University（复旦大学附属妇产科医院 生殖与发育研究院）
CASIA（中国科学院自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Horizon Robotics（地平线机器人）
In object detection, bounding box regression (BBR) is a crucial step that determines the object localization performance. However, we find that most previous loss functions for BBR have two main drawbacks: (i) Both $\ell_n$-norm and IOU-based loss functions are inefficient to depict the objective of BBR, which leads to slow convergence and inaccurate regression results. (ii) Most of the loss functions ignore the imbalance problem in BBR that the large number of anchor boxes which have small overlaps with the target boxes contribute most to the optimization of BBR. To mitigate the adverse effec…
The accuracy of the object detection model depends on whether the anchor boxes effectively trained. Because of the small number of GT boxes or object target is invariant in the training phase, cannot effectively train anchor boxes. Improving detection accuracy by extending the dataset is an effective way. We propose a data enhancement method based on the foreground-background separation model. While this model uses a binary image of object target random perturb original dataset image. Perturbation methods include changing the color channel of the object, adding salt noise to the object, and en…
VinAI Research（VinAI研究院）；Oregon State University（俄勒冈州立大学）
This paper addresses incremental few-shot instance segmentation, where a few examples of new object classes arrive when access to training examples of old classes is not available anymore, and the goal is to perform well on both old and new classes. We make two contributions by extending the common Mask-RCNN framework in its second stage -- namely, we specify a new object class classifier based on the probit function and a new uncertainty-guided bounding-box predictor. The former leverages Bayesian learning to address a paucity of training examples of new classes. The latter learns not only to…
Nanjing University of Information Technology（南京信息工程大学）
As the rapid development of depth learning, object detection in aviatic remote sensing images has become increasingly popular in recent years. Most of the current Anchor Free detectors based on key point detection sampling directly regression and classification features, with the design of object loss function based on the horizontal bounding box. It is more challenging for complex and diverse aviatic remote sensing object. In this paper, we propose an Anchor Free aviatic remote sensing object detector (BWP-Det) to detect rotating and multi-scale object. Specifically, we design a interactive d…
The past decade has witnessed significant progress on detecting objects in aerial images that are often distributed with large scale variations and arbitrary orientations. However most of existing methods rely on heuristically defined anchors with different scales, angles and aspect ratios and usually suffer from severe misalignment between anchor boxes and axis-aligned convolutional features, which leads to the common inconsistency between the classification score and localization accuracy. To address this issue, we propose a Single-shot Alignment Network (S$^2$A-Net) consisting of two module…
Carnegie Mellon University（卡内基梅隆大学）；University of Chinese Academy of Sciences（中国科学院大学）；Shenzhen Institutes of Advanced Technology（深圳先进技术研究院）
Classification and localization are two pillars of visual object detectors. However, in CNN-based detectors, these two modules are usually optimized under a fixed set of candidate (or anchor) bounding boxes. This configuration significantly limits the possibility to jointly optimize classification and localization. In this paper, we propose a Multiple Instance Learning (MIL) approach that selects anchors and jointly optimizes the two modules of a CNN-based object detector. Our approach, referred to as Multiple Anchor Learning (MAL), constructs anchor bags and selects the most representative an…
Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）；University of Chinese Academy of Sciences（中国科学院大学）；School of Data Science, The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳）数据科学学院）；Secure Computing Lab of Big Data, Shenzhen Research Institute of Big Data（深圳市大数据研究院大数据安全计算实验室）；Tencent（腾讯）；Institute of Artificial Intelligence, Hangzhou Innovation Institute, Beihang University（北京航空航天大学杭州创新研究院人工智能研究所）
Object detection has been widely used in many safety-critical tasks, such as autonomous driving. However, its vulnerability to adversarial examples has not been sufficiently studied, especially under the practical scenario of black-box attacks, where the attacker can only access the query feedback of predicted bounding-boxes and top-1 scores returned by the attacked model. Compared with black-box attack to image classification, there are two main challenges in black-box attack to detection. Firstly, even if one bounding-box is successfully attacked, another sub-optimal bounding-box may be dete…
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；College of Information Engineering, Shanghai Maritime University（上海海事大学信息工程学院）；School of Computer Science and Technology, East China Normal University（华东师范大学计算机科学与技术学院）；School of Automation and Electrical Engineering, University of Science and Technology Beijing（北京科技大学自动化与电气工程学院）
Anchor-free detectors basically formulate object detection as dense classification and regression. For popular anchor-free detectors, it is common to introduce an individual prediction branch to estimate the quality of localization. The following inconsistencies are observed when we delve into the practices of classification and quality estimation. Firstly, for some adjacent samples which are assigned completely different labels, the trained model would produce similar classification scores. This violates the training objective and leads to performance degradation. Secondly, it is found that d…
