In many areas of engineering, nonlinear numerical analysis is playing an increasingly important role in supporting the design and monitoring of structures. Whilst increasing computer resources have made such formerly prohibitive analyses possible, certain use cases such as uncertainty quantification and real time high-precision simulation remain computationally challenging. This motivates the development of reduced order modelling methods, which can reduce the computational toll of simulations relying on mechanistic principles. The majority of existing reduced order modelling techniques involve projection onto linear bases. Such methods are well established for linear systems but when considering nonlinear systems their application becomes more difficult. Targeted schemes for nonlinear systems are available, which involve the use of multiple linear reduction bases or the enrichment of traditional bases. These methods are however generally limited to weakly nonlinear systems. In this work, nonlinear normal modes (NNMs) are demonstrated as a possible invertible reduction basis for nonlinear systems. The extraction of NNMs from output only data using machine learning methods is demonstrated and a novel NNM-based reduced order modelling scheme introduced. The method is demonstrated on a simulated example of a nonlinear 20 degree-of-freedom (DOF) system.
Computationally efficient, structure-preserving reduced-order methods are developed for the Korteweg de Vries (KdV) equations in Hamiltonian form. The KdV equation is discretized in space by finite differences. The resulting skew-gradient system of ordinary differential equations (ODEs) is integrated with the linearly implicit Kahan's method, which preserves the Hamiltonian approximately. We have shown, using proper orthogonal decomposition (POD), the Hamiltonian structure of the full-order model (FOM) is preserved by the reduced-order model (ROM). The quadratic nonlinear terms of the KdV equa…
In this work, we present a reduced-order model for a nonlinear cross-diffusion problem from population dynamics, for the Shigesada-Kawasaki-Teramoto (SKT) equation with Lotka-Volterra kinetics. The finite-difference discretization of the SKT equation in space results in a system of linear--quadratic ordinary differential equations (ODEs). The reduced order model (ROM) has the same linear-quadratic structure as the full order model (FOM). Using the linear-quadratic structure of the ROM, the reduced-order solutions are computed independent of the full solutions with the proper orthogonal decompo…
A parametric, hybrid reduced order model approach based on the Proper Orthogonal Decomposition with both Galerkin projection and interpolation based on Radial Basis Functions method is presented. This method is tested against a case of turbulent non-isothermal mixing in a T-junction pipe, a common ow arrangement found in nuclear reactor cooling systems. The reduced order model is derived from the 3D unsteady, incompressible Navier-Stokes equations weakly coupled with the energy equation. For high Reynolds numbers, the eddy viscosity and eddy diffusivity are incorporated into the reduced order …
Flow of cerebrospinal fluid in perivascular spaces is a key mechanism underlying brain transport and clearance. In this paper, we present a mathematical and numerical formalism for reduced models of pulsatile viscous fluid flow in networks of generalized annular cylinders. We apply this framework to study cerebrospinal fluid flow in perivascular spaces induced by pressure differences, cardiac pulse wave-induced vascular wall motion and vasomotion. The reduced models provide approximations of the cross-section average pressure and cross-section flux, both defined over the topologically one-dime…
We present an approach to reduced-order modelling that builds off recent graph-theoretic work for representation, exploration, and analysis of computed states of physical systems (Banerjee et al., Comp. Meth. App. Mech. Eng., 351, 501-530, 2019). We extend a non-local calculus on finite weighted graphs to build such models by exploiting polynomial expansions and Taylor series. In the general framework for non-local calculus on graphs, the graph edge weights are intricately linked to the embedding of the graph, and consequently to the definition of the derivatives. In a previous communication (…
The present works is focused on studying bifurcating solutions in compressible fluid dynamics. On one side, the physics of the problem is thoroughly investigated using high-fidelity simulations of the compressible Navier-Stokes equations discretised with the Discontinuous Galerkin method. On the other side, from a numerical modelling point of view, two different non-intrusive reduced order modelling techniques are employed to predict the overall behaviour of the bifurcation. Both approaches showed good agreement with full-order simulations even in proximity of the bifurcating points where the …
In this work, we consider two kinds of model reduction techniques to simulate blood flow through the largest systemic arteries, where a stenosis is located in a peripheral artery i.e. in an artery that is located far away from the heart. For our simulations we place the stenosis in one of the tibial arteries belonging to the right lower leg (right post tibial artery). The model reduction techniques that are used are on the one hand dimensionally reduced models (1-D and 0-D models, the so-called mixed-dimension model) and on the other hand surrogate models produced by kernel methods. Both metho…
A proper orthogonal decomposition-based B-splines Bézier elements method (POD-BSBEM) is proposed as a non-intrusive reduced-order model for uncertainty propagation analysis for stochastic time-dependent problems. The method uses a two-step proper orthogonal decomposition (POD) technique to extract the reduced basis from a collection of high-fidelity solutions called snapshots. A third POD level is then applied on the data of the projection coefficients associated with the reduced basis to separate the time-dependent modes from the stochastic parametrized coefficients. These are approximated in…
Quick simulations for iterative evaluations of multi-design variables and boundary conditions are essential to find the optimal acoustic conditions in building design. We propose to use the reduced basis method (RBM) for realistic room acoustic scenarios where the surfaces have inhomogeneous acoustic properties, which enables quick evaluations of changing absorption materials for different surfaces in room acoustic simulations. The RBM has shown its benefit to speed up room acoustic simulations by three orders of magnitude for uniform boundary conditions. This study investigates the RBM with t…
Towards a machine learning pipeline in reduced order modelling for inverse problems: neural networks for boundary parametrization, dimensionality reduction and solution manifold approximation
Geometrically parametrized Partial Differential Equations are nowadays widely used in many different fields as, for example, shape optimization processes or patient specific surgery studies. The focus of this work is on some advances for this topic, capable of increasing the accuracy with respect to previous approaches while relying on a high cost-benefit ratio performance. The main scope of this paper is the introduction of a new technique mixing up a classical Galerkin-projection approach together with a data-driven method to obtain a versatile and accurate algorithm for the resolution of ge…
Within the framework of parameter dependent PDEs, we develop a constructive approach based on Deep Neural Networks for the efficient approximation of the parameter-to-solution map. The research is motivated by the limitations and drawbacks of state-of-the-art algorithms, such as the Reduced Basis method, when addressing problems that show a slow decay in the Kolmogorov n-width. Our work is based on the use of deep autoencoders, which we employ for encoding and decoding a high fidelity approximation of the solution manifold. To provide guidelines for the design of deep autoencoders, we consider…
The objective of this contribution is to compare two methods proposed recently in order to build efficient reduced-order models for geometrically nonlinear structures. The first method relies on the normal form theory that allows one to obtain a nonlinear change of coordinates for expressing the reduced-order dynamics in an invariant-based span of the phase space. The second method is the modal derivative (MD) approach, and more specifically the quadratic manifold defined in order to derive a second-order nonlinear change of coordinates. Both methods share a common point of view, willing to in…
