Regression test case prioritization (RTCP) aims to improve the rate of fault detection by executing more important test cases as early as possible. Various RTCP techniques have been proposed based on different coverage criteria. Among them, a majority of techniques leverage code coverage information to guide the prioritization process, with code units being considered individually, and in isolation. In this paper, we propose a new coverage criterion, code combinations coverage, that combines the concepts of code coverage and combination coverage. We apply this coverage criterion to RTCP, as a new prioritization technique, code combinations coverage based prioritization (CCCP). We report on empirical studies conducted to compare the testing effectiveness and efficiency of CCCP with four popular RTCP techniques: total, additional, adaptive random, and search-based test prioritization. The experimental results show that even when the lowest combination strength is assigned, overall, the CCCP fault detection rates are greater than those of the other four prioritization techniques. The CCCP prioritization costs are also found to be comparable to the additional test prioritization technique. Moreover, our results also show that when the combination strength is increased, CCCP provides higher fault detection rates than the state-of-the-art, regardless of the levels of code coverage.
Regression Testing is exclusively executed to guarantee the desirable functionality of existing software after pursuing quite a few amendments or variations in it. Perhaps, it testifies the quality of the modified software by concealing the regressions or software bugs in both functional and non-functional applications of the system. In fact, the maintenance of test suite is enormous as it necessitates a big investment of time and money on test cases on a large scale. So, minimizing the test suite becomes the indispensable requisite to lessen the budget on regression testing. Precisely, this r…
Context: During the development process of a software program, regression testing is used to ensure that the correct behavior of the software is retained after updates to the source code. This regression testing becomes costly over time as the number of test cases increases and it makes sense to prioritize test cases in order to execute fault-detecting test cases as soon as possible. There are many coverage-based test case prioritization (TCP) methods that only use the code coverage data to prioritize test cases. By incorporating the fault-proneness estimations of code units into the coverage-…
When changes are performed on an automated production system (aPS), new faults can be accidentally introduced in the system, which are called regressions. A common method for finding these faults is regression testing. In most cases, this regression testing process is performed under high time pressure and on-site in a very uncomfortable environment. Until now, there is no automated support for finding and prioritizing system test cases regarding the fully integrated aPS that are suitable for finding regressions. Thus, the testing technician has to rely on personal intuition and experience, po…
Software Product Lines (SPL) are inherently difficult to test due to the combinatorial explosion of the number of products to consider. To reduce the number of products to test, sampling techniques such as combinatorial interaction testing have been proposed. They usually start from a feature model and apply a coverage criterion (e.g. pairwise feature interaction or dissimilarity) to generate tractable, fault-finding, lists of configurations to be tested. Prioritization can also be used to sort/generate such lists, optimizing coverage criteria or weights assigned to features. However, current …
An oracle is a mechanism to decide whether the outputs of the program for the executed test cases are correct. For machine learning programs, such oracle is not available or too difficult to apply. Metamorphic testing is a testing approach that uses metamorphic relations, which are necessary properties of the software under test to help verify the correctness of a program. Prioritization of metamorphic relations helps to reduce the cost of metamorphic testing [1]. However, prioritizing metamorphic relations based on code coverage is often not effective for prioritizing MRs for machine learning…
Montana State University（蒙大拿州立大学）；University of North Florida（北佛罗里达大学）
Metamorphic testing (MT) is widely used for testing programs that face the oracle problem. It uses a set of metamorphic relations (MRs), which are relations among multiple inputs and their corresponding outputs to determine whether the program under test is faulty. Typically, MRs vary in their ability to detect faults in the program under test, and some MRs tend to detect the same set of faults. In this paper, we propose approaches to prioritize MRs to improve the efficiency and effectiveness of MT for regression testing. We present two MR prioritization approaches: (1) fault-based and (2) cov…
Continuous Integration (CI) significantly reduces integration problems, speeds up development time, and shortens release time. However, it also introduces new challenges for quality assurance activities, including regression testing, which is the focus of this work. Though various approaches for test case prioritization have shown to be very promising in the context of regression testing, specific techniques must be designed to deal with the dynamic nature and timing constraints of CI. Recently, Reinforcement Learning (RL) has shown great potential in various challenging scenarios that require…
The practice of unit testing enables programmers to obtain automated feedback on whether a currently edited program is consistent with the expectations specified in test cases. Feedback is most valuable when it happens immediately, as defects can be corrected instantly before they become harder to fix. With growing and longer running test suites, however, feedback is obtained less frequently and lags behind program changes. The objective of test prioritization is to rank tests so that defects, if present, are found as early as possible or with the least costs. While there are numerous static a…
The use of relevant metrics of software systems could improve various software engineering tasks, but identifying relationships among metrics is not simple and can be very time consuming. Recommender systems can help with this decision-making process, many applications have utilized these systems to improve the performance of their applications. To investigate the potential benefits of recommender systems in regression testing, we implemented an item-based collaborative filtering recommender system that uses user interaction data and application change history information to develop a test cas…
University of Calgary（卡尔加里大学）；Chalmers University of Technology（查尔姆斯理工大学）
Most automated software testing tasks can benefit from the abstract representation of test cases. Traditionally, this is done by encoding test cases based on their code coverage. Specification-level criteria can replace code coverage to better represent test cases' behavior, but they are often not cost-effective. In this paper, we hypothesize that execution traces of the test cases can be a good alternative to abstract their behavior for automated testing tasks. We propose a novel embedding approach, Test2Vec, that maps test execution traces to a latent space. We evaluate this representation i…
Test case prioritization (TCP) aims to reorder the regression test suite with a goal of increasing the fault detection rate. Various TCP techniques have been proposed based on different prioritization strategies. Among them, the greedy-based techniques are the most widely-used TCP techniques. However, existing greedy-based techniques usually reorder all candidate test cases in prioritization iterations, resulting in both efficiency and effectiveness problems. In this paper, we propose a generic partial attention mechanism, which adopts the previous priority values (i.e., the number of addition…
Regression testing is an essential activity to assure that software code changes do not adversely affect existing functionalities. With the wide adoption of Continuous Integration (CI) in software projects, which increases the frequency of running software builds, running all tests can be time-consuming and resource-intensive. To alleviate that problem, Test case Selection and Prioritization (TSP) techniques have been proposed to improve regression testing by selecting and prioritizing test cases in order to provide early feedback to developers. In recent years, researchers have relied on Mach…
Simula Research Laboratory（西穆拉研究院）；Cisco Systems（思科系统公司）
Continuous integration testing is an important step in the modern software engineering life cycle. Test prioritization is a method that can improve the efficiency of continuous integration testing by selecting test cases that can detect faults in the early stage of each cycle. As continuous integration testing produces voluminous test execution data, test history is a commonly used artifact in test prioritization. However, existing test prioritization techniques for continuous integration either cannot handle large test history or are optimized for using a limited number of historical test cyc…
Test Case Prioritization (TCP) techniques aim at proposing new test case execution orders to favor the achievement of certain testing goal, such as fault detection. Current TCP research focus mainly on code-based regression testing; however in the Model-Based Testing (MBT) context, we still need more investigation. General TCP techniques do not use historical information, since this information is often unavailable. Therefore, techniques use different sources of information to guide prioritization. We propose a novel technique that guides its operation using provided hints, the Hint-Based Adap…
When developing autonomous driving systems (ADS), developers often need to replay previously collected driving recordings to check the correctness of newly introduced changes to the system. However, simply replaying the entire recording is not necessary given the high redundancy of driving scenes in a recording (e.g., keeping the same lane for 10 minutes on a highway). In this paper, we propose a novel test reduction and prioritization approach for multi-module ADS. First, our approach automatically encodes frames in a driving recording to feature vectors based on a driving scene schema. Then,…
Two heuristics namely diversity-based (DBTP) and history-based test prioritization (HBTP) have been separately proposed in the literature. Yet, their combination has not been widely studied in continuous integration (CI) environments. The objective of this study is to catch regression faults earlier, allowing developers to integrate and verify their changes more frequently and continuously. To achieve this, we investigated six open-source projects, each of which included several builds over a large time period. Findings indicate that previous failure knowledge seems to have strong predictive p…
Regression testing is performed to provide confidence that changes in a part of software do not affect other parts of the software. An execution of all existing test cases is the best way to re-establish this confidence. However, regression testing is an expensive process---there might be insufficient resources (e.g., time, workforce) to allow for the re-execution of all test cases. Regression test prioritization techniques attempt to re-order a regression test suite based on some criteria so that highest priority test cases are executed earlier. In this study, we want to prioritize test cases…
Code coverage has been used in the software testing context mostly as a metric to assess a generated test suite's quality. Recently, code coverage analysis is used as a white-box testing technique for test optimization. Most of the research activities focus on using code coverage for test prioritization and selection within automated testing strategies. Less effort has been paid in the literature to use code coverage for test generation. This paper introduces a new Code Coverage-based Test Case Generation (CCTG) concept that changes the current practices by utilizing the code coverage analysis…
Test Case Prioritization (TCP) is an important component of regression testing, allowing for earlier detection of faults or helping to reduce testing time and cost. While several TCP approaches exist in the research literature, a growing number of studies have evaluated them against synthetic software defects, called mutants. Hence, it is currently unclear to what extent TCP performance on mutants would be representative of the performance achieved on real faults. To answer this fundamental question, we conduct the first empirical study comparing the performance of TCP techniques applied to bo…
Over the last years, machine learning techniques have been applied to more and more application domains, including software engineering and, especially, software quality assurance. Important application domains have been, e.g., software defect prediction or test case selection and prioritization. The ability to predict which components in a large software system are most likely to contain the largest numbers of faults in the next release helps to better manage projects, including early estimation of possible release delays, and affordably guide corrective actions to improve the quality of the …
Test Case Prioritization (TCP) is an increasingly important regression testing technique for reordering test cases according to a pre-defined goal, particularly as agile practices gain adoption. To better understand these techniques, we perform the first extensive study aimed at empirically evaluating four static TCP techniques, comparing them with state-of-research dynamic TCP techniques across several quality metrics. This study was performed on 58 real-word Java programs encompassing 714 KLoC and results in several notable observations. First, our results across two effectiveness metrics (t…
Testing with simulation environments helps to identify critical failing scenarios for self-driving cars (SDCs). Simulation-based tests are safer than in-field operational tests and allow detecting software defects before deployment. However, these tests are very expensive and are too many to be run frequently within limited time constraints. In this paper, we investigate test case prioritization techniques to increase the ability to detect SDC regression faults with virtual tests earlier. Our approach, called SDC-Prioritizer, prioritizes virtual tests for SDCs according to static features of t…
Test Input Prioritizers (TIP) for Deep Neural Networks (DNN) are an important technique to handle the typically very large test datasets efficiently, saving computation and labeling costs. This is particularly true for large-scale, deployed systems, where inputs observed in production are recorded to serve as potential test or training data for the next versions of the system. Feng et. al. propose DeepGini, a very fast and simple TIP, and show that it outperforms more elaborate techniques such as neuron- and surprise coverage. In a large-scale study (4 case studies, 8 test datasets, 32'200 tra…
Lean processes focus on doing only necessery things in an efficient way. Artificial intelligence and Machine Learning offer new opportunities to optimizing processes. The presented approach demonstrates an improvement of the test process by using Machine Learning as a support tool for test management. The scope is the semi-automation of the selection of regression tests. The proposed lean testing process uses Machine Learning as a supporting machine, while keeping the human test manager in charge of the adequate test case selection. 1 Introduction Many established long running projects and pro…
Simula Research Laboratory（西姆拉研究实验室）；University of Stavanger（斯塔万格大学）；ABB Robotics（ABB机器人公司）
Testing in Continuous Integration (CI) involves test case prioritization, selection, and execution at each cycle. Selecting the most promising test cases to detect bugs is hard if there are uncertainties on the impact of committed code changes or, if traceability links between code and tests are not available. This paper introduces Retecs, a new method for automatically learning test case selection and prioritization in CI with the goal to minimize the round-trip time between code commits and developer feedback on failed test cases. The Retecs method uses reinforcement learning to select and p…
There is a growing body of research indicating the potential of machine learning to tackle complex software testing challenges. One such challenge pertains to continuous integration testing, which is highly time-constrained, and generates a large amount of data coming from iterative code commits and test runs. In such a setting, we can use plentiful test data for training machine learning predictors to identify test cases able to speed up the detection of regression bugs introduced during code integration. However, different machine learning models can have different fault prediction performan…
The goal of regression testing is to ensure that the behavior of existing code is not altered by new program changes. The primary focus of regression testing should be on code associated with: a) earlier bug fixes; and b) particular application scenarios considered to be important by the tester. Existing coverage criteria do not enable such focus, e.g., 100% branch coverage does not guarantee that a given bug fix is exercised or a given application scenario is tested. Therefore, there is a need for a complementary coverage criterion in which the user can define a test requirement characterizin…
ReTest is a novel testing tool for Java applications with a graphical user interface (GUI), combining monkey testing and difference testing. Since this combination sidesteps the oracle problem, it enables the generation of GUI-based regression tests. ReTest makes use of evolutionary computing (EC), particularly a genetic algorithm (GA), to optimize these tests towards code coverage. While this is indeed a desirable goal in terms of software testing and potentially finds many bugs, it lacks one major ingredient: human behavior. Consequently, human testers often find the results less reasonable …
Automated tests play an important role in software evolution because they can rapidly detect faults introduced during changes. In practice, code-coverage metrics are often used as criteria to evaluate the effectiveness of test suites with focus on regression faults. However, code coverage only expresses which portion of a system has been executed by tests, but not how effective the tests actually are in detecting regression faults. Our goal was to evaluate the validity of code coverage as a measure for test effectiveness. To do so, we conducted an empirical study in which we applied an extreme…
