碱-硅酸反应影响下混凝土结构的多尺度模拟:细观损伤演化与宏观混凝土劣化的耦合
Multi-scale modelling of concrete structures affected by alkali-silica reaction: Coupling the mesoscopic damage evolution and the macroscopic concrete deterioration
摘要:
基于一阶FE 2均匀化技术的有限元方法,制定分析碱-硅反应引起的混凝土结构损伤,通过连接在宏观尺度的混凝土退化的反应程度在细观尺度。在细观尺度上,混凝土被认为是一种非均质材料,它由嵌在砂浆基质中的骨料组成。碱-硅反应(ASR)的机械效应通过在骨料内部的几个局部点中应用温度相关的本征应变来建模,并且使用连续损伤模型来建模混凝土的机械退化,该模型能够再现复杂的ASR裂纹网络。然后,每个宏观有限元的有效刚度张量和有效应力张量计算通过均匀化相应的代表性体积元(RVE)的机械响应,从而避免了在宏观尺度上使用唯象本构关系。宏观和中观尺度之间的收敛是通过迭代过程实现的。ASR实验室标本的2D模型作为概念验证进行分析。该模型能够解释在宏观尺度上施加的载荷和在中观尺度上的ASR产物膨胀。结果表明,宏观应力状态影响的方向内的潜在RVES损伤。在RVE内损伤对齐的情况下,有效刚度变为各向异性。
英文摘要:
A finite-element approach based on the first-order FE 2 homogenisation technique is formulated to analyse the alkali-silica reaction-induced damage in concrete structures, by linking the concrete degradation at the macro-scale to the reaction extent at the meso-scale. At the meso-scale level, concrete is considered as a heterogeneous material consisting of aggregates embedded in a mortar matrix. The mechanical effects of the Alkali-Silica Reaction (ASR) are modelled through the application of temperature-dependent eigenstrains in several localised spots inside the aggregates and the mechanical degradation of concrete is modelled using continuous damage model, which is capable of reproducing the complex ASR crack networks. Then, the effective stiffness tensor and the effective stress tensor for each macroscopic finite element are computed by homogenising the mechanical response of the corresponding representative volume element (RVE), thus avoiding the use of phenomenological constitutive laws at the macro-scale. Convergence between macro- and meso-scales is achieved via an iterative procedure. A 2D model of an ASR laboratory specimen is analysed as a proof of concept. The model is able to account for the loading applied at the macro-scale and the ASR-product expansion at the meso-scale. The results demonstrate that the macroscopic stress state influences the orientation of damage inside the underlying RVEs. The effective stiffness becomes anisotropic in cases where damage is aligned inside the RVE.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。