arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2006.13496physics.app-phphysics.med-ph
收藏

用于骨愈合的可打印可调刚度超材料的优化设计

Optimum Design of Printable Tunable Stiffness Metamaterial for Bone Healing

Mohammad Saber Hashemi, Karl H. Kraus, Azadeh Sheidae

AI总结:

针对长骨折固定中刚度过高和应力遮挡问题,提出基于多目标GA的患者特异性可调刚度骨棒优化与3D打印框架,并通过止动机制和应力约束提升安全性与适用性。

摘要:

为解决现有骨棒在长骨折愈合中的常见缺陷,本文设计、优化并三维打印了一种可调刚度骨棒。现有骨固定装置的普遍不足是刚度过高,因而几乎没有实现最佳骨生长效果所需的变形柔性,并且存在应力遮挡效应。我们的新型设计框架为外科医生提供可直接三维打印的患者特异性设计,经过优化后具有理想的力-位移响应,并配备止动机构,以防止在跌倒等高于通常载荷的情况下发生进一步变形。该框架是一种基于多目标遗传算法(GA)优化的设计优化,用于量化各目标,调节可变刚度,同时最小化模型的最大 Mises 应力,以避免骨棒发生塑性和永久变形。本文提出的可调刚度材料优化设计计算框架并不专用于胫骨骨棒,可用于任何需要双线性刚度的应用。

英文摘要:

A tunable stiffness bone rod was designed, optimized, and 3D printed to address the common shortcomings of existing bone rods in the healing of long fractured bones. The common deficiencies of existing bone fixations are high stiffness, thereby negligible flexibility in deformation for best bone growth results, and stress-shielding effect. Our novel design framework provides the surgeons with ready-for-3D-printing patient-specific designs, optimized to have desired force-displacement response with a stopping mechanism for preventing further deformation under higher than usual loads such as falling. The framework is a design optimization based on the multi-objective genetic algorithm (GA) optimization to quantify the objectives, tunning the varied stiffness while minimizing the maximum Mises stress of the model to avoid plastic and permanent deformation of the bone rod. The optimum design computational framework of tunable stiffness material presented in this paper is not specific for a tibia bone rod. It can be used for any application where bilinear stiffness is desirable.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑