托卡马克中钨等离子体面对部件的事后分析:致密多孔氧化物和氮化物薄膜及纳米颗粒的拉曼显微镜测量
Post-mortem analysis of tungsten plasma facing components in tokamaks: Raman microscopy measurements on compact, porous oxide and nitride films and nanoparticles
摘要:
拉曼显微镜是一种方法,可用于未来的死后分析的样品提取的ITER等离子体面临的。该研究表明,该技术是有用的,用于研究钨基材料含有杂质,包括氧化物和氮化物。在这里,我们采用脉冲激光沉积和直流氩辉光放电,以产生含钨的合成薄膜(紧凑,多孔)和纳米粒子,并调查其形态上的测量拉曼光谱的影响。薄膜中的氧和/或氮的量也进行了研究。通过X射线光电子能谱、原子力显微镜、电子显微镜(扫描和透射)、能量色散X射线能谱、飞行时间弹性反冲检测分析获得比较数据。用于进行拉曼显微镜的激光束的功率密度变化高达4个数量级(0.01-20 mW/ $μ$ m 2),以研究薄膜和纳米颗粒的热稳定性。作为第一个结果,我们给出的证据表明,拉曼显微镜是足够灵敏的检测表面原生氧化物。其次,更多的氧化钨在多孔材料和纳米颗粒比在紧凑的薄膜中检测到,和拉曼光谱带的强度与它们的氧含量。第三,当致密膜含有足够大量的氮时,这些膜的热稳定性(即在激光加热下的结构和化学改性)差。这一发现表明,在拉曼激光诱导加热发生在环境空气中,氮可以被氧气取代。最后,我们的方法可用于快速表征所分析样品的形态和化学性质,并在微米尺度上产生氧化物。关键词:PLD,拉曼光谱,氧化钨,氮化钨,等离子体壁相互作用,激光加热,事后分析2
英文摘要:
Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$μ$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。