TREAT中Fission热探针的计算-实验研究
Computational-Experimental Investigation of a Fission Thermal Probe in TREAT
摘要:
核燃料的开发需要在假设事故条件下进行设计过程和鉴定的非稳态/瞬态试验。在核燃料使用过程中或暴露于极端超功率条件下时,可能会发生破裂、破裂、断裂、熔化和其他燃料故障模式。因此,燃料保持合理的结构完整性和可冷却几何形状至关重要。瞬态反应堆试验(TREAT)实验装置设计和建造于1958年11月,用于进行燃料和结构材料的瞬态试验。核加热的幅度是在测试设计,分析和数据解释的最重要的关键参数之一,在超导。一些稳态测试是能够直接测量加热通过热隔离回路中的冷却剂的焓上升,但大量的重要的测试必须依赖于核建模相关的核心操作参数试样核加热。不了解这些模型及其输入可能会阻止实验者实现所需的条件,并阻碍先进的模型将现象描述到所需的置信水平。对于非稳态/瞬态试验,这种情况可能更加困难,因为在这些试验中,核加热有意地在短时间尺度上变化。本研究开发了一种新型的核加热传感器技术,该技术使用空间分辨的可裂变仪器材料的实时测温直接测量感兴趣的参数,演示了仪器在TREAT中的使用,并与核模型进行数据比较,以促进对瞬态功率耦合的深入了解。在这里,我们提出了我们的设计和测试结果的探头。
英文摘要:
The development of nuclear fuels requires unsteady/transient testing for design process and qualification under postulated accident conditions. Breach, rupture, fracture, melting, and other fuel failure modes may occur during the use of nuclear fuels or when they are exposed to extreme overpower conditions. Therefore, it is crucial for the fuel to retain reasonable structural integrity and coolable geometry. The experimental facility of Transient Reactor Test (TREAT) was designed and constructed in November 1958 to conduct transient testing of fuels and structural materials. The magnitude of nuclear heating is one of the most important key parameters in test design, analysis, and data interpretation in TREAT. Some steady-state tests are able to measure heating directly via enthalpy rise of coolant in thermally-isolated loops, but an enormous number of important tests must rely upon nuclear modeling to correlate core operating parameters to specimen nuclear heating. Uncertainties of these models and their inputs can prevent experimenters from achieving desired conditions and hamper advanced models from describing the phenomena to the level of confidence needed. The situation can be even more difficult for unsteady/transient tests where nuclear heating is intentionally varied over short time scales. This research develops a novel nuclear heating sensor technology which directly measures the parameters of interest using spatially-resolved real-time thermometry of fissionable instrument materials, demonstrate the instruments' use in TREAT, and perform data comparisons to nuclear models to facilitate an advanced understanding of transient power coupling. Here we present our results of the designed probe and its testing outcome.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。