This paper presents a novel model predictive control (MPC) formulation for set-point tracking. Stabilizing predictive controllers based on terminal ingredients may exhibit stability and feasibility issues in the event of a reference change for small to moderate prediction horizons. In the MPC for tracking formulation, these issues are solved by the addition of an artificial equilibrium point as a new decision variable, providing a significantly enlarged domain of attraction and guaranteeing recursive feasibility for any reference change. However, it may suffer from performance issues if the prediction horizon is not large enough. This paper presents an extension of this formulation where a harmonic artificial reference is used in place of the equilibrium point. The proposed formulation achieves even greater domains of attraction and can significantly outperform other MPC formulations when the prediction horizon is small. We prove the asymptotic stability and recursive feasibility of the proposed controller, as well as provide guidelines for the design of its main ingredients. Finally, we highlight its advantages with a case study of a ball and plate system.
Various efforts have been devoted to developing stabilizing distributed Model Predictive Control (MPC) schemes for tracking piecewise constant references. In these schemes, terminal sets are usually computed offline and used in the MPC online phase to guarantee recursive feasibility and asymptotic stability. Maximal invariant terminal sets do not necessarily respect the distributed structure of the network, hindering the distributed implementation of the controller. On the other hand, ellipsoidal terminal sets respect the distributed structure, but may lead to conservative schemes. In this pap…
Delft University of Technology（代尔夫特理工大学）；University of Leuven (KU Leuven)（鲁汶大学）
This paper proposes a new robust trajectory tracking error-based control approach for unmanned ground vehicles. A trajectory tracking error-based model is used to design a linear model predictive controller and its control action is combined with feedforward and robust control actions. The experimental results show that the proposed control structure is capable to let a tractor-trailer system track both linear and curvilinear target trajectories with low tracking error.
National Key Lab of Vehicular Transmission, School of Mechanical Engineering, Beijing Institute of Technology（北京理工大学机械工程学院车辆传动国家重点实验室）
Model predictive control (MPC) is widely used for path tracking of autonomous vehicles due to its ability to handle various types of constraints. However, a considerable predictive error exists because of the error of mathematics model or the model linearization. In this paper, we propose a framework combining the MPC with a learning-based error estimator and a feedforward compensator to improve the path tracking accuracy. An extreme learning machine is implemented to estimate the model based predictive error from vehicle state feedback information. Offline training data is collected from a ve…
A distributed model predictive control scheme is developed for tracking piecewise constant references where the terminal set is reconfigured online, whereas the terminal controller is computed offline. Unlike many standard existing schemes, this scheme yields large feasible regions without performing offline centralized computations. Although the resulting optimal control problem (OCP) is a semidefinite program (SDP), an SDP scalability method based on diagonal dominance is used to approximate the derived SDP by a second-order cone program. The OCPs of the proposed scheme and its approximation…
For controller design for systems on manifolds embedded in Euclidean space, it is convenient to utilize a theory that requires a single global coordinate system on the ambient Euclidean space rather than multiple local charts on the manifold or coordinate-free tools from differential geometry. In this article, we apply such a theory to design model predictive tracking controllers for systems whose dynamics evolve on manifolds and illustrate its efficacy with the fully actuated rigid body attitude control system.
In precision aquaculture, the primary goal is to maximize biomass production while minimizing production costs. This objective can be achieved by optimizing factors that have a strong influence on fish growth, such as the feeding rate, temperature, and dissolved oxygen. This paper provides a comparative study of three model predictive control (MPC) strategies for fish growth reference tracking under a representative bioenergetic growth model in precision aquaculture. We propose to evaluate three candidate MPC formulations for fish growth reference tracking based on the receding horizon. The fi…
A plug-and-play model predictive control (PnP MPC) scheme is proposed for varying-topology networks to track piecewise constant references. The proposed scheme allows subsystems to occasionally join and leave the network while preserving asymptotic stability and recursive feasibility and comprises two main phases. In the redesign phase, passivity-based control is used to ensure that asymptotic stability of the network is preserved. In the transition phase, reconfigurable terminal ingredients are used to ensure that the distributed MPC problem is initially feasible after the PnP operation. The …
Near Rectilinear Halo Orbits (NRHOs), a subclass of halo orbits around the L1 and L2 Lagrange points, are promising candidates for future lunar gateways in cis-lunar space and as staging orbits for lunar missions. Closed-loop control is beneficial to compensate orbital perturbations and potential instabilities while maintaining spacecraft on NRHOs and performing relative motion maneuvers. This paper investigates the use of nonlinear model predictive control (NMPC) coupled with low-thrust actuators for station-keeping on NRHOs. It is demonstrated through numerical simulations that NMPC is able …
We present a nonlinear model predictive control (MPC) scheme for tracking of dynamic target signals. The scheme combines stabilization and dynamic trajectory planning in one layer, thus ensuring constraint satisfaction irrespective of changes in the dynamic target signal. For periodic target signals we ensure exponential stability of the optimal reachable periodic trajectory using suitable terminal ingredients and a convexity condition for the underlying periodic optimal control problem. Furthermore, we introduce an online optimization of the terminal set size to automate the trade-off between…
In this paper, we propose a chance constrained stochastic model predictive control scheme for reference tracking of distributed linear time-invariant systems with additive stochastic uncertainty. The chance constraints are reformulated analytically based on mean-variance information, where we design suitable Probabilistic Reachable Sets for constraint tightening. Furthermore, the chance constraints are proven to be satisfied in closed-loop operation. The design of an invariant set for tracking complements the controller and ensures convergence to arbitrary admissible reference points, while a …
This paper presents a robust economic model predictive control (EMPC) formulation with zone tracking for discrete-time uncertain nonlinear systems. The proposed design ensures that the zone tracking objective is achieved in finite steps and at the same time optimizes the economic performance. In the proposed design, instead of tracking the original target zone, a robust control invariant set within the target zone is determined and is used as the actual zone tracked in the proposed EMPC. This approach ensures that the zone tracking objective is achieved within finite steps and once the zone tr…
Electric-powered wheelchair plays an important role in providing accessibility for people with mobility impairment. Ensuring the safety of wheelchair operation in different application scenarios and for diverse users is crucial when the designing controller for tracking tasks. In this work, we propose a safety-based speed tracking control algorithm for wheelchair systems with external disturbances and uncertain parameters at the dynamic level. The set-membership approach is applied to estimate the sets of uncertain parameters online and a designed model predictive control scheme with online mo…
University of Toronto（多伦多大学）；University of Tartu（塔尔图大学）
This paper proposes a Model Predictive Control (MPC) algorithm for target tracking amongst static and dynamic obstacles. Our main contribution lies in improving the computational tractability and reliability of the underlying non-convex trajectory optimization. The result is an MPC algorithm that runs real-time on laptops and embedded hardware devices such as Jetson TX2. Our approach relies on novel reformulations for the tracking, collision, and occlusion constraints that induce a multi-convex structure in the resulting trajectory optimization. We exploit these mathematical structures using t…
This paper presents a new Lyapunov-based nonlinear model predictive controller (LNMPC) for the attitude control problem of unmanned aerial vehicles (UAVs), which is essential for their functioning operation. The controller is designed based on a quadratic cost function integrating UAV dynamics and system constraints. An additional contraction constraint is then introduced to ensure closed-loop system stability. That constraint is fulfilled via a Lyapunov function derived from a sliding mode controller (SMC). The feasibility and stability of the LNMPC are finally proved. Simulation and comparis…
In Model Predictive Control (MPC) formulations of trajectory tracking problems, infeasible reference trajectories and a-priori unknown constraints can lead to cumbersome designs, aggressive tracking, and loss of recursive feasibility. This is the case, for example, in trajectory tracking applications for mobile systems in the presence of constraints which are not fully known a-priori. In this paper, we propose a new framework called Model Predictive Flexible trajectory Tracking Control (MPFTC), which relaxes the trajectory tracking requirement. Additionally, we accommodate recursive feasibilit…
We consider the problem of bridging the gap between geometric tracking control theory and implementation of model predictive control (MPC) for robotic systems operating on manifolds. We propose a generic on-manifold MPC formulation based on a canonical representation of the system evolving on manifolds. Then, we present a method that solves the on-manifold MPC formulation by linearizing the system along the trajectory under tracking. There are two main advantages of the proposed scheme. The first is that the linearized system leads to an equivalent error system represented by a set of minimal …
This paper presents an extension to the nonlinear Model Predictive Control for Tracking scheme able to guarantee convergence even in cases of non-convex output admissible sets. This is achieved by incorporating a convexifying homeomorphism in the optimization problem, allowing it to be solved in the convex space. A novel class of non-convex sets is also defined for which a systematic procedure to construct a convexifying homeomorphism is provided. This homeomorphism is then embedded in the Model Predictive Control optimization problem in such a way that the homeomorphism is no longer required …
This article presents a sparse, low-memory footprint optimization algorithm for the implementation of the model predictive control (MPC) for tracking formulation in embedded systems. This MPC formulation has several advantages over standard MPC formulations, such as an increased domain of attraction and guaranteed recursive feasibility even in the event of a sudden reference change. However, this comes at the expense of the addition of a small amount of decision variables to the MPC's optimization problem that complicates the structure of its matrices. We propose a sparse optimization algorith…
A novel nonlinear model predictive control approach for state signal shaping is proposed. The control strategy introduces a residual shape cost kernel based on the dynamics of circular limit cycles from a supercritical Neimark-Sacker bifurcation normal form. This allows the controller to impose a fundamental harmonic state signal shape with a specific frequency and amplitude. An application example for harmonic compensation in distribution grids integrated with renewable energies is presented. The controller is tasked with the calculation of the reference current for an active power filter use…
Institute for Dynamic Systems and Control, ETH Zürich（苏黎世联邦理工学院动态系统与控制研究所）
This paper presents an offset-free model predictive controller for fast and accurate control of a spherical soft robotic arm. In this control scheme, a linear model is combined with an online disturbance estimation technique to systematically compensate model deviations. Dynamic effects such as material relaxation resulting from the use of soft materials can be addressed to achieve offset-free tracking. The tracking error can be reduced by 35% when compared to a standard model predictive controller without a disturbance compensation scheme. The improved tracking performance enables the realiza…
California Institute of Technology（加州理工学院）；ETH Zurich（苏黎世联邦理工学院）；Northeastern University（东北大学）
The feasibility of performing airborne and ground manipulation, perception, and reconnaissance using wheeled rovers, unmanned aerial vehicles, CubeSats, SmallSats and more have been evaluated before. Among all of these solutions, balloon-based systems possess merits that make them extremely attractive, e.g., a simple operation mechanism and endured operation time. However, there are many hurdles to overcome to achieve robust loitering performance in balloon-based applications. We attempt to identify design and control challenges, and propose a novel robotic platform that allows for the applica…
Harbin Institute of Technology Shenzhen（哈尔滨工业大学深圳校区）
To promote the widespread use of mobile robots in diverse fields, the performance of trajectory tracking must be ensured. To address the constraints and nonlinear features associated with mobile robot systems, we apply nonlinear model predictive control (MPC) to realize the trajectory tracking of mobile robots. Specifically, to alleviate the online computational complexity of nonlinear MPC, this paper devises a lattice piecewise affine (PWA) approximation method that can approximate both the nonlinear system and control law of explicit nonlinear MPC. The kinematic model of the mobile robot is …
This paper presents a novel trajectory tracker for autonomous quadrotor navigation in dynamic and complex environments. The proposed framework integrates a distributional Reinforcement Learning (RL) estimator for unknown aerodynamic effects into a Stochastic Model Predictive Controller (SMPC) for trajectory tracking. Aerodynamic effects derived from drag forces and moment variations are difficult to model directly and accurately. Most current quadrotor tracking systems therefore treat them as simple `disturbances' in conventional control approaches. We propose Quantile-approximation-based Dist…
A class of data-driven control methods has recently emerged based on Willems' fundamental lemma. Such methods can ease the modelling burden in control design but can be sensitive to disturbances acting on the system under control. In this paper, we propose a restructuring of the problem to incorporate segmented prediction trajectories. The proposed segmentation leads to reduced tracking error for longer prediction horizons in the presence of unmeasured disturbance and noise when compared to an unsegmented formulation. The performance characteristics are illustrated in a set-point tracking case…
National University of Sciences and Technology（国立科技大学）
We analyze damage propagation modeling of turbo-engines in a data-driven approach. We investigate subspace tracking assuming a low dimensional manifold structure and a static behavior during the healthy state of the machines. Our damage propagation model is based on the deviation of the data from the static behavior and uses the notion of health index as a measure of the condition. Hence, we incorporate condition-based maintenance and estimate the remaining useful life based on the current and previous health indexes. This paper proposes an algorithm that adapts well to the dynamics of the dat…
In this paper, we present a systematic approach for high-performance and efficient trajectory tracking control of autonomous wheel loaders. With the nonlinear dynamic model of a wheel loader, nonlinear model predictive control (MPC) is used in offline trajectory planning to obtain a high-performance state-control trajectory while satisfying the state and control constraints. In tracking control, the nonlinear model is embedded into a Linear Parameter Varying (LPV) model and the LPV-MPC strategy is used to achieve fast online computation and good tracking performance. To demonstrate the effecti…
