Relay drones in delay-tolerant applications are dispatched to remote locations in order to gather data transmitted by a source node. Collected data are stored on the drones and delivered to one or multiple bases. This paper considers two schemes for broadcasting data to drones when feedback channels are not available: a data carousel and systematic random linear network coding (RLNC). We propose a theoretical framework for the calculation of the probability that a base will fully or partially recover the transmitted data and the probability that all involved bases will successfully obtain the data, when the bases are either isolated or interconnected. Theoretical results are validated through simulations. Design considerations are also discussed, including the relationship among the field size used by RLNC, the number of relay drones and the requirement for full data recovery or the retrieval of at least part of the data.
Convolutional Network-Coded Cooperation in Multi-Source Networks with a Multi-Antenna Relay
我们提出了一种新的合作传输方案，称为“卷积网络编码合作”（CNCC）的网络，包括N个源，一个M天线中继，和一个共同的目的地。假设源-中继（S-R）信道为Nakagami-m衰落，而源-目的（S-D）和中继-目的（R-D）信道为瑞利衰落。CNCC方案利用良好的（N+ M '，N，v）系统卷积码的生成矩阵，其中在GF（2）上设计d_free的自由距离，作为由网络的节点运行的网络编码矩阵，使得系统符号直接从源发送，并且奇偶校验符号由中继的最佳天线发送。获得了源的BER的上界，从而获得了所实现的分集阶数。数值结果表明，CNCC方案优于其他合作计划考虑，在分集阶数和网络吞吐量。仿真结果验证了理论分析的正确性。
In this paper, we analyze the performance of a single-relay network in which the reliability is provided by means of Random Linear Network Coding (RLNC). We consider a scenario when both source and relay nodes can encode packets. Unlike the traditional approach to relay networks, we introduce a passive relay mode, in which the relay node simply retransmits collected packets in case it cannot decode them. In contrast with the previous studies, we derive a novel theoretical framework for the performance characterization of the considered relay network. We extend our analysis to a more general sc…
To enhance the reliability of LoRa sensor networks, we propose two opportunistic forwarding protocols in which relays overhear sensor-to-gateway messages and periodically forward them to a gateway. To reduce the number of transmissions, the relays forward XOR sums of the overheard messages. One protocol employs a single relay node, while two relays cooperate in the other. With a single relay, our proposed protocol requires fewer relay transmissions to achieve similar loss rates as conventional uncoded forwarding in which every received message is immediately forwarded. We demonstrate up to 55%…
Physical-layer network coding (PNC) is a communications paradigm that exploits overlapped transmissions to boost the throughput of wireless relay networks. A high point of PNC research was a theoretical proof that PNC that makes use of lattice codes could approach the information-theoretic capacity of a two-way relay network (TWRN), where two end nodes communicate via a relay node. The capacity cannot be achieved by conventional methods of time-division or straightforward network coding. Many practical challenges, however, remain to be addressed before the full potential of lattice-coded PNC c…
In this paper, we find trajectory planning and power allocation for a vehicular network in which an unmanned-aerial-vehicle (UAV) is considered as a relay to extend coverage for two disconnected far vehicles. We show that in a two-user network with an amplify-and-forward (AF) relay, non-orthogonal-multiple-access (NOMA) always has better or equal sum-rate in comparison to orthogonal-multiple-access (OMA) at high signal-to-noise-ratio (SNR) regime. However, for the cases where i) base station (BS)-to-relay link is weak, or ii) two users have similar links, or iii) BS-to-relay link is similar to…
For large unmanned aerial vehicle (UAV) networks, the timely communication is needed to accomplish a series of missions accurately and effectively. The relay technology will play an important role in UAV networks by helping drones communicating with long-distance drones, which solves the problem of the limited transmission power of drones. In this paper, the relay selection is seen as the entry point to improve the performance of self-organizing network with multiple optimizing factors. Different from the ground relay models, the relay selection in UAV communication networks presents new chall…
We design and validate new block propagation protocols for the peer-to-peer (P2P) network of the Bitcoin blockchain. Despite its strong protection for security and privacy, the current Bitcoin blockchain can only support a low number of transactions per second (TPS). In this work, we redesign the current Bitcoin's networking protocol to increase TPS without changing vital components in its consensus-building protocol. In particular, we improve the compact-block relaying protocol to enable the propagation of blocks containing a massive number of transactions without inducing extra propagation l…
This paper considers the multiple-access relay channel in a setting where two source nodes transmit packets to a destination node, both directly and via a relay node, over packet erasure channels. Intra-session network coding is used at the source nodes and inter-session network coding is employed at the relay node to combine the recovered source packets of both source nodes. In this work, we investigate the performance of the network-coded system in terms of the probability that the destination node will successfully recover the source packets of the two source nodes. We build our analysis on…
With the fast growing number of wireless devices and demand of user data, the backhaul load becomes a bottleneck in wireless networks. Physical layer network coding (PNC) allows Access Points (APs) to relay compressed, network coded user data, therefore reducing the backhaul traffic. In this paper, an implementation of uplink Network Coded Modulation (NetCoM) with PNC is presented. A 5-node prototype NetCoM system is established using Universal Software Radio Peripherals (USRPs) and a practical PNC scheme designed for binary systems is utilised. An orthogonal frequency division multiplexing (O…
We propose application-layer coding schemes to recover lost data in delay-sensitive uplink (sensor-to-gateway) communications in the Internet of Things. Built on an approach that combines retransmissions and forward erasure correction, the proposed schemes' salient features include low computational complexity and the ability to exploit sporadic receiver feedback for efficient data recovery. Reduced complexity is achieved by keeping the number of coded transmissions as low as possible and by devising a mechanism to compute the optimal degree of a coded packet in O(1). Our major contributions a…
In drone-assisted mobile networks, Drone-mounted Base Stations (DBSs) are responsively and flexibly deployed over any Places of Interest (PoI), such as sporadic hotspots and disaster-struck areas, where the existing mobile network infrastructure is unable to provide wireless coverage. In this paper, a DBS is an aerial base station to relay traffic between a nearby Macro Base Station (MBS) and the users. In addition, Free Space Optics (FSO) is applied as the backhauling solution to significantly increase the capacity of the backhaul link between an MBS and a DBS. Most of the existing DBS placem…
This paper investigates the information freshness of two-way relay networks (TWRN) operated with physical-layer network coding (PNC). Information freshness is quantified by age of information (AoI), defined as the time elapsed since the generation time of the latest received information update. PNC reduces communication latency of TWRNs by turning superimposed electromagnetic waves into network-coded messages so that end users can send update packets to each other via the relay more frequently. Although sending update packets more frequently is potential to reduce AoI, how to deal with packet …
This paper investigates moving networks of Unmanned Aerial Vehicles (UAVs), such as drones, as one of the innovative opportunities brought by the 5G. With a main purpose to extend connectivity and guarantee data rates, the drones require hovering locations due to limitations such as flight time and coverage surface. We provide analytic bounds on the requirements in terms of connectivity extension for vehicular networks served by fixed Enhanced Mobile BroadBand (eMBB) infrastructure, where both vehicular networks and infrastructures are modeled using stochastic and fractal geometry as a model f…
Drone base station (DBS) is a promising technique to extend wireless connections for uncovered users of terrestrial radio access networks (RAN). To improve user fairness and network performance, in this paper, we design 3D trajectories of multiple DBSs in the drone assisted radio access networks (DA-RAN) where DBSs fly over associated areas of interests (AoIs) and relay communications between the base station (BS) and users in AoIs. We formulate the multi-DBS 3D trajectory planning and scheduling as a mixed integer non-linear programming (MINLP) problem with the objective of minimizing the ave…
Drone cell (DC) is an emerging technique to offer flexible and cost-effective wireless connections to collect Internet-of-things (IoT) data in uncovered areas of terrestrial networks. The flying trajectory of DC significantly impacts the data collection performance. However, designing the trajectory is a challenging issue due to the complicated 3D mobility of DC, unique DC-to-ground (D2G) channel features, limited DC-to-BS (D2B) backhaul link quality, etc. In this paper, we propose a 3D DC trajectory design for the DC-assisted IoT data collection where multiple DCs periodically fly over IoT de…
Network coding is famous for significantly improving the throughput of networks. The successful decoding of the network coded data relies on some side information of the original data. In that framework, independent data flows are usually first decoded and then network coded by relay nodes. If appropriate signal design is adopted, physical layer network coding is a natural way in wireless networks. In this work, a network coding tree algorithm which enhances the efficiency of the multiple access system (MAS) is presented. For MAS, existing works tried to avoid the collisions while collisions h…
This paper investigates ARQ (Automatic Repeat request) designs for PNC (Physical-layer Network Coding) systems. We have previously found that, besides TWRC (Two-Way Relay Channel) operated on the principle of PNC, there are many other PNC building blocks--building blocks are simple small network structures that can be used to construct a large network. In some of these PNC building blocks, receivers can obtain side information through overhearing. Although such overheard information is not the target information that the receivers desire, the receivers can exploit the overheard information tog…
