聚氨酯条包埋成形光纤方向应变灵敏度的检测
Examining Directional Strain Sensitivity of Shaped Optical Fibre Embedded in Polyurethane Strip
摘要:
使用直光纤电缆的分布式应变感测遭受远离光纤轴的应变灵敏度降低。在这项研究中,方向灵敏度是通过正弦成形的纤维,是嵌入在聚氨酯条增强。首先,通过一个相对简单的分析模型量化的方向敏感性。其次,静态应变测量使用布里渊光频域分析(BOFDA)系统进行的物理样品的条。两个不同的方向进行检查,即在行和宽边方向。前者涉及平行于纤维正弦嵌入的平面的变形,而后者意味着垂直于它的平面的变形。可以观察到,在这些方向上对变形的响应是相反的,即纤维经历负应变,因此缩短,直线变形,和正应变,因此拉伸,对于宽边变形。可以发现,纤维在直线方向上稍微更敏感,这与模型预测的行为一致。此外,我们看到,沿光纤的测量应变主要是由嵌入材料的弹性特性的影响,由于,最重要的是,泊松比以及正弦形状的纤维的几何参数。
英文摘要:
Distributed strain sensing using a straight optical-fibre cable suffers from a decreased strain senstivity away from the fibre's axis. In this study, the directional senstivity is enhanced via sinusoidally shaping the fibre that is embedded in a polyurethane strip. First, the directional senstivity is quantified via a relatively simple analytical model. Second, static-strain measurements using a Brillouin Optical Frequency Domain Analysis (BOFDA) system are carried out on a physical sample of the strip. Two different directions are examined, namely in-line and broadside orientations. The former involves deforming parallel to the plane where the fibre is sinusoidally embedded, whereas the latter means deforming the plane normal to it. It can be observed that the response to the deformation in these orientations is opposite, i.e. the fibre experiences negative strain, so shortening, an in-line deformation, and a positive strain, so stretching, for a broadside deformation. It can be found that the fibre is slightly more senstive in the in-line direction which agrees with the behaviour as predicted by the model. Also, we see that the measured strain along the optical fibre is mainly influenced by the elastic properties of the embedding material due to, most importantly, the Poisson's ratio as well as the geometrical parameters of the sinusoidally shaped fibre.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。