Numerical solutions for phase noise due to pointing jitter with the LISA telescope

LISA Telescope: Phase noise due to pointing jitter

In a space based gravitational wave antenna like LISA, involving long light paths linking distant emitter/receiver spacecrafts, signal detection amounts to measuring the light-distance variationsthrough a phase change at the receiver. This is why spurious phase fluctuations due to various mechanical/thermal effects must be carefully studied. We consider here a possible pointing jitter in the light beam sent from the emitter. We show how the resulting phase noise depends on the quality of the wavefront due to the incident beam impinging on the telescope and due to the imperfections of the teles…

Calculating the precision of tilt-to-length coupling estimation and noise subtraction in LISA using Fisher information

Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase noise using time-delay interferometry (TDI). We present here a frequency domain model that describes the effect of angular motion of all three spacecraft on the interferometric signals after propagating through TDI. We then apply a Fisher information matrix analysis to this model to calculate the minimum uncertainty with which TTL coupling coefficients may be e…

Pointing LISA-like gravitational wave detectors

Space-based gravitational wave detectors based on the Laser Interferometer Space Antenna (LISA) design operate by synthesizing one or more interferometers from fringe velocity measurements generated by changes in the light travel time between three spacecraft in a special set of drag-free heliocentric orbits. These orbits determine the inclination of the synthesized interferometer with respect to the ecliptic plane. Once these spacecraft are placed in their orbits, the orientation of the interferometers at any future time is fixed by Kepler's Laws based on the initial orientation of the spacec…

利用来自闭环动力学的指向抖动为天琴进行倾斜至长度噪声减除

Tilt-to-length noise subtraction with pointing jitters from closed-loop dynamics for TianQin

针对天琴真实闭环DFPC残余角抖动下的TTL耦合噪声校准问题，论文比较MOSA旋转方案，并提出零通道组合与正弦人工机动注入方法，以提升系数估计精度并满足噪声指标。

Subtraction of test mass angular noise in the LISA Technology Package interferometer

We present recent sensitivity measurements of the LISA Technology Package interferometer with articulated mirrors as test masses, actuated by piezo-electric transducers. The required longitudinal displacement resolution of 9 pm/sqrt[Hz] above 3 mHz has been demonstrated with an angular noise that corresponds to the expected in on-orbit operation. The excess noise contribution of this test mass jitter onto the sensitive displacement readout was completely subtracted by fitting the angular interferometric data streams to the longitudinal displacement measurement. Thus, this cross-coupling consti…

Time Domain Simulations of Arm Locking in LISA

Arm locking is a technique that has been proposed for reducing laser frequency fluctuations in the Laser Interferometer Space Antenna (LISA), a gravitational-wave observatory sensitive in the milliHertz frequency band. Arm locking takes advantage of the geometric stability of the triangular constellation of three spacecraft that comprise LISA to provide a frequency reference with a stability in the LISA measurement band that exceeds that available from a standard reference such as an optical cavity or molecular absorption line. We have implemented a time-domain simulation of arm locking includ…