To speedup Deep Neural Networks (DNN) accelerator design and enable effective implementation, we propose HybridDNN, a framework for building high-performance hybrid DNN accelerators and delivering FPGA-based hardware implementations. Novel techniques include a highly flexible and scalable architecture with a hybrid Spatial/Winograd convolution (CONV) Processing Engine (PE), a comprehensive design space exploration tool, and a complete design flow to fully support accelerator design and implementation. Experimental results show that the accelerators generated by HybridDNN can deliver 3375.7 and 83.3 GOPS on a high-end FPGA (VU9P) and an embedded FPGA (PYNQ-Z1), respectively, which achieve a 1.8x higher performance improvement compared to the state-of-art accelerator designs. This demonstrates that HybridDNN is flexible and scalable and can target both cloud and embedded hardware platforms with vastly different resource constraints.
Existing FPGA-based DNN accelerators typically fall into two design paradigms. Either they adopt a generic reusable architecture to support different DNN networks but leave some performance and efficiency on the table because of the sacrifice of design specificity. Or they apply a layer-wise tailor-made architecture to optimize layer-specific demands for computation and resources but loose the scalability of adaptation to a wide range of DNN networks. To overcome these drawbacks, this paper proposes a novel FPGA-based DNN accelerator design paradigm and its automation tool, called DNNExplorer,…
University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Facebook Reality Labs Research（Facebook现实实验室研究部）
Creating virtual avatars with realistic rendering is one of the most essential and challenging tasks to provide highly immersive virtual reality (VR) experiences. It requires not only sophisticated deep neural network (DNN) based codec avatar decoders to ensure high visual quality and precise motion expression, but also efficient hardware accelerators to guarantee smooth real-time rendering using lightweight edge devices, like untethered VR headsets. Existing hardware accelerators, however, fail to deliver sufficient performance and efficiency targeting such decoders which consist of multi-bra…
Customized hardware accelerators have been developed to provide improved performance and efficiency for DNN inference and training. However, the existing hardware accelerators may not always be suitable for handling various DNN models as their architecture paradigms and configuration tradeoffs are highly application-specific. It is important to benchmark the accelerator candidates in the earliest stage to gather comprehensive performance metrics and locate the potential bottlenecks. Further demands also emerge after benchmarking, which require adequate solutions to address the bottlenecks and …
Traditional computers with von Neumann architecture are unable to meet the latency and scalability challenges of Deep Neural Network (DNN) workloads. Various DNN accelerators based on Conventional compute Hardware Accelerator (CHA), Near-Data-Processing (NDP) and Processing-in-Memory (PIM) paradigms have been proposed to meet these challenges. Our goal in this work is to perform a rigorous comparison among the state-of-the-art accelerators from DNN accelerator paradigms, we have used unique layers from MobileNet, ResNet, BERT, and DLRM of MLPerf Inference benchmark for our analysis. The detail…
We present a DNN accelerator that allows inference at arbitrary precision with dedicated processing elements that are configurable at the bit level. Our DNN accelerator has 8 Processing Elements controlled by a RISC-V controller with a combined 8.2 TMACs of computational power when implemented with the recent Alveo U250 FPGA platform. We develop a code generator tool that ingests CNN models in ONNX format and generates an executable command stream for the RISC-V controller. We demonstrate the scalable throughput of our accelerator by running different DNN kernels and models when different quan…
The high efficiency of domain-specific hardware accelerators for machine learning (ML) has come from specialization, with the trade-off of less configurability/ flexibility. There is growing interest in developing flexible ML accelerators to make them future-proof to the rapid evolution of Deep Neural Networks (DNNs). However, the notion of accelerator flexibility has always been used in an informal manner, restricting computer architects from conducting systematic apples-to-apples design-space exploration (DSE) across trillions of choices. In this work, we formally define accelerator flexibil…
Deep neural networks (DNN) have become significant applications in both cloud-server and edge devices. Meanwhile, the growing number of DNNs on those platforms raises the need to execute multiple DNNs on the same device. This paper proposes a dynamic partitioning algorithm to perform concurrent processing of multiple DNNs on a systolic-array-based accelerator. Sharing an accelerator's storage and processing resources across multiple DNNs increases resource utilization and reduces computation time and energy consumption. To this end, we propose a partitioned weight stationary dataflow with a mi…
The recent breakthroughs and prohibitive complexities of Deep Neural Networks (DNNs) have excited extensive interest in domain-specific DNN accelerators, among which optical DNN accelerators are particularly promising thanks to their unprecedented potential of achieving superior performance-per-watt. However, the development of optical DNN accelerators is much slower than that of electrical DNN accelerators. One key challenge is that while many techniques have been developed to facilitate the development of electrical DNN accelerators, techniques that support or expedite optical DNN accelerato…
Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）；IBM T. J. Watson Research Center（IBM托马斯·J·沃森研究中心）；University of Tübingen（图宾根大学）
Deep neural network (DNN) accelerators received considerable attention in recent years due to the potential to save energy compared to mainstream hardware. Low-voltage operation of DNN accelerators allows to further reduce energy consumption, however, causes bit-level failures in the memory storing the quantized weights. Furthermore, DNN accelerators are vulnerable to adversarial attacks on voltage controllers or individual bits. In this paper, we show that a combination of robust fixed-point quantization, weight clipping, as well as random bit error training (RandBET) or adversarial bit error…
National Technical University of Athens（雅典国立技术大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
Deep Neural Networks (DNNs) are very popular because of their high performance in various cognitive tasks in Machine Learning (ML). Recent advancements in DNNs have brought beyond human accuracy in many tasks, but at the cost of high computational complexity. To enable efficient execution of DNN inference, more and more research works, therefore, exploit the inherent error resilience of DNNs and employ Approximate Computing (AC) principles to address the elevated energy demands of DNN accelerators. This article provides a comprehensive survey and analysis of hardware approximation techniques f…
In this paper, we focus on temperature-aware Monolithic 3D (Mono3D) deep neural network (DNN) inference accelerators for biomedical applications. We develop an optimizer that tunes aspect ratios and footprint of the accelerator under user-defined performance and thermal constraints, and generates near-optimal configurations. Using the proposed Mono3D optimizer, we demonstrate up to 61% improvement in energy efficiency for biomedical applications over a performance-optimized accelerator.
The use of lower precision has emerged as a popular technique to optimize the compute and storage requirements of complex Deep Neural Networks (DNNs). In the quest for lower precision, recent studies have shown that ternary DNNs (which represent weights and activations by signed ternary values) represent a promising sweet spot, achieving accuracy close to full-precision networks on complex tasks. We propose TiM-DNN, a programmable in-memory accelerator that is specifically designed to execute ternary DNNs. TiM-DNN supports various ternary representations including unweighted {-1,0,1}, symmetri…
The everlasting demand for higher computing power for deep neural networks (DNNs) drives the development of parallel computing architectures. 3D integration, in which chips are integrated and connected vertically, can further increase performance because it introduces another level of spatial parallelism. Therefore, we analyze dataflows, performance, area, power and temperature of such 3D-DNN-accelerators. Monolithic and TSV-based stacked 3D-ICs are compared against 2D-ICs. We identify workload properties and architectural parameters for efficient 3D-ICs and achieve up to 9.14x speedup of 3D v…
Deep neural networks are a promising solution for applications that solve problems based on learning data sets. DNN accelerators solve the processing bottleneck as a domain-specific processor. Like other hardware solutions, there must be exact compatibility between the accelerator and other software components, especially the compiler. This paper presents a LOCAL (Low Complexity mapping Algorithm) that is favorable to use at the compiler level to perform mapping operations in one pass with low computation time and energy consumption. We first introduce a formal definition of the design space i…
Deep neural network (DNN) models continue to grow in size and complexity, demanding higher computational power to enable real-time inference. To efficiently deliver such computational demands, hardware accelerators are being developed and deployed across scales. This naturally requires an efficient scale-out mechanism for increasing compute density as required by the application. 2.5D integration over interposer has emerged as a promising solution, but as we show in this work, the limited interposer bandwidth and multiple hops in the Network-on-Package (NoP) can diminish the benefits of the ap…
Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）；IBM T. J. Watson Research Center（IBM T. J. Watson 研究中心）；University of Tübingen（蒂宾根大学）
Deep neural network (DNN) accelerators received considerable attention in past years due to saved energy compared to mainstream hardware. Low-voltage operation of DNN accelerators allows to further reduce energy consumption significantly, however, causes bit-level failures in the memory storing the quantized DNN weights. In this paper, we show that a combination of robust fixed-point quantization, weight clipping, and random bit error training (RandBET) improves robustness against random bit errors in (quantized) DNN weights significantly. This leads to high energy savings from both low-voltag…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Southern Illinois University（南伊利诺伊大学）；University of Stuttgart（斯图加特大学）
In this work, we introduce a control variate approximation technique for low error approximate Deep Neural Network (DNN) accelerators. The control variate technique is used in Monte Carlo methods to achieve variance reduction. Our approach significantly decreases the induced error due to approximate multiplications in DNN inference, without requiring time-exhaustive retraining compared to state-of-the-art. Leveraging our control variate method, we use highly approximated multipliers to generate power-optimized DNN accelerators. Our experimental evaluation on six DNNs, for Cifar-10 and Cifar-10…
Carnegie Mellon University（卡内基梅隆大学）；The University of Texas at Austin（德克萨斯大学奥斯汀分校）
As the machine learning and systems community strives to achieve higher energy-efficiency through custom DNN accelerators and model compression techniques, there is a need for a design space exploration framework that incorporates quantization-aware processing elements into the accelerator design space while having accurate and fast power, performance, and area models. In this work, we present QAPPA, a highly parameterized quantization-aware power, performance, and area modeling framework for DNN accelerators. Our framework can facilitate the future research on design space exploration of DNN …
SRI International（美国斯坦福国际研究院）；Center for Vision Technologies（视觉技术中心）
In this paper we present Hyper-Dimensional Reconfigurable Analytics at the Tactical Edge (HyDRATE) using low-SWaP embedded hardware that can perform real-time reconfiguration at the edge leveraging non-MAC (free of floating-point MultiplyACcumulate operations) deep neural nets (DNN) combined with hyperdimensional (HD) computing accelerators. We describe the algorithm, trained quantized model generation, and simulated performance of a feature extractor free of multiply-accumulates feeding a hyperdimensional logic-based classifier. Then we show how performance increases with the number of hyperd…
Southern Illinois University（南伊利诺伊大学）；University of Stuttgart（斯图加特大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
Recent Deep Neural Networks (DNNs) managed to deliver superhuman accuracy levels on many AI tasks. Several applications rely more and more on DNNs to deliver sophisticated services and DNN accelerators are becoming integral components of modern systems-on-chips. DNNs perform millions of arithmetic operations per inference and DNN accelerators integrate thousands of multiply-accumulate units leading to increased energy requirements. Approximate computing principles are employed to significantly lower the energy consumption of DNN accelerators at the cost of some accuracy loss. Nevertheless, rec…
To cope with the increasing demand and computational intensity of deep neural networks (DNNs), industry and academia have turned to accelerator technologies. In particular, FPGAs have been shown to provide a good balance between performance and energy efficiency for accelerating DNNs. While significant research has focused on how to build efficient layer processors, the computational building blocks of DNN accelerators, relatively little attention has been paid to the on-chip interconnects that sit between the layer processors and the FPGA's DRAM controller. We observe a disparity between DNN …
National Technical University of Athens（雅典国立技术大学）；Aristotle University of Thessaloniki（塞萨洛尼基亚里士多德大学）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
Current state-of-the-art employs approximate multipliers to address the highly increased power demands of DNN accelerators. However, evaluating the accuracy of approximate DNNs is cumbersome due to the lack of adequate support for approximate arithmetic in DNN frameworks. We address this inefficiency by presenting AdaPT, a fast emulation framework that extends PyTorch to support approximate inference as well as approximation-aware retraining. AdaPT can be seamlessly deployed and is compatible with the most DNNs. We evaluate the framework on several DNN models and application fields including C…
Sparsity is a growing trend in modern DNN models. Existing Sparse-Sparse Matrix Multiplication (SpMSpM) accelerators are tailored to a particular SpMSpM dataflow (i.e., Inner Product, Outer Product or Gustavsons), that determines their overall efficiency. We demonstrate that this static decision inherently results in a suboptimal dynamic solution. This is because different SpMSpM kernels show varying features (i.e., dimensions, sparsity pattern, sparsity degree), which makes each dataflow better suited to different data sets. In this work we present Flexagon, the first SpMSpM reconfigurable ac…
Samsung AI（三星人工智能中心）；Imperial College London（帝国理工学院）；University of Cambridge（剑桥大学）
As the use of AI-powered applications widens across multiple domains, so do increase the computational demands. Primary driver of AI technology are the deep neural networks (DNNs). When focusing either on cloud-based systems that serve multiple AI queries from different users each with their own DNN model, or on mobile robots and smartphones employing pipelines of various models or parallel DNNs for the concurrent processing of multi-modal data, the next generation of AI systems will have multi-DNN workloads at their core. Large-scale deployment of AI services and integration across mobile and…
Tallinn University of Technology（塔林理工大学）；Mälardalen University（梅拉达伦大学）
While the role of Deep Neural Networks (DNNs) in a wide range of safety-critical applications is expanding, emerging DNNs experience massive growth in terms of computation power. It raises the necessity of improving the reliability of DNN accelerators yet reducing the computational burden on the hardware platforms, i.e. reducing the energy consumption and execution time as well as increasing the efficiency of DNN accelerators. Therefore, the trade-off between hardware performance, i.e. area, power and delay, and the reliability of the DNN accelerator implementation becomes critical and require…
University of Glasgow（格拉斯哥大学）；Northeastern University（东北大学）
Edge computing devices inherently face tight resource constraints, which is especially apparent when deploying Deep Neural Networks (DNN) with high memory and compute demands. FPGAs are commonly available in edge devices. Since these reconfigurable circuits can achieve higher throughput and lower power consumption than general purpose processors, they are especially well-suited for DNN acceleration. However, existing solutions for designing FPGA-based DNN accelerators for edge devices come with high development overheads, given the cost of repeated FPGA synthesis passes, reimplementation in a …
Reconfigurable accelerators for deep neural networks (DNNs) promise to improve performance such as inference latency. STONNE is the first cycle-accurate simulator for reconfigurable DNN inference accelerators which allows for the exploration of accelerator designs and configuration space. However, preparing models for evaluation and exploring configuration space in STONNE is a manual developer-timeconsuming process, which is a barrier for research. This paper introduces Bifrost, an end-to-end framework for the evaluation and optimization of reconfigurable DNN inference accelerators. Bifrost op…
Deep Neural Networks have flourished at an unprecedented pace in recent years. They have achieved outstanding accuracy in fields such as computer vision, natural language processing, medicine or economics. Specifically, Convolutional Neural Networks (CNN) are particularly suited to object recognition or identification tasks. This, however, comes at a high computational cost, prompting the use of specialized GPU architectures or even ASICs to achieve high speeds and energy efficiency. ASIC accelerators streamline the execution of certain dataflows amenable to CNN computation that imply the cons…
Deep neural networks (DNN) are increasingly being accelerated on application-specific hardware such as the Google TPU designed especially for deep learning. Timing speculation is a promising approach to further increase the energy efficiency of DNN accelerators. Architectural exploration for timing speculation requires detailed gate-level timing simulations that can be time-consuming for large DNNs that execute millions of multiply-and-accumulate (MAC) operations. In this paper we propose FATE, a new methodology for fast and accurate timing simulations of DNN accelerators like the Google TPU. …
HYDRA: Hybrid Data Multiplexing and Run-time Layer Configurable DNN Accelerator
Centre for Advanced Electronics, IIT Indore（印度理工学院印多尔分校先进电子中心）；Center for Development of Advanced Computing, Bengaluru（班加罗尔高级计算发展中心）；NSDCS Research Group, Department of Electrical Engineering, IIT Indore（印度理工学院印多尔分校电气工程系NSDCS研究组）
Carnegie Mellon University（卡内基梅隆大学）；The University of Texas at Austin（德克萨斯大学奥斯汀分校）
As the machine learning and systems communities strive to achieve higher energy-efficiency through custom deep neural network (DNN) accelerators, varied bit precision or quantization levels, there is a need for design space exploration frameworks that incorporate quantization-aware processing elements (PE) into the accelerator design space while having accurate and fast power, performance, and area models. In this work, we present QADAM, a highly parameterized quantization-aware power, performance, and area modeling framework for DNN accelerators. Our framework can facilitate future research o…
In this article, we investigate the impact of architectural parameters of array-based DNN accelerators on accelerator's energy consumption and performance in a wide variety of network topologies. For this purpose, we have developed a tool that simulates the execution of neural networks on array-based accelerators and has the capability of testing different configurations for the estimation of energy consumption and processing latency. Based on our analysis of the behavior of benchmark networks under different architectural parameters, we offer a few recommendations for having an efficient yet …
Exploration of Activation Fault Reliability in Quantized Systolic Array-Based DNN Accelerators
Tallinn University of Technology（塔林理工大学）；University of Alberta（阿尔伯塔大学）；Shahid Bahonar University of Kerman（克尔曼沙希德·巴霍纳尔大学）；York University（约克大学）；Mälardalen University（梅拉达伦大学）
Training deep neural networks (DNNs) is a computationally expensive job, which can take weeks or months even with high performance GPUs. As a remedy for this challenge, community has started exploring the use of more efficient data representations in the training process, e.g., block floating point (BFP). However, prior work on BFP-based DNN accelerators rely on a specific BFP representation making them less versatile. This paper builds upon an algorithmic observation that we can accelerate the training by leveraging multiple BFP precisions without compromising the finally achieved accuracy. B…
