We consider depletion effects of a pear-shaped colloidal particle in a hard-sphere solvent, for two different model realisations of the pear-shaped colloidal particle. The two models are the pear hard Gaussian overlap (PHGO) particles and the hard pears of revolution (HPR). The motivation for this study is to provide a microscopic understanding for the substantially different mesoscopic self-assembly properties of these pear-shaped colloids, in dense suspensions, that have been reported in the first part of this series. This is done by determining the differing depletion attraction via MC simulations of PHGO and HPR particles in a pool of a hard spherical solvent and comparing them with excluded volume calculations of numerically obtained ideal configurations on the microscopic level. While the HPR model behaves as predicted by the analysis of excluded volumes, the PHGO model showcases a preference for splay between neighbouring particles, which can be attributed to the special non-additive characteristics of the PHGO contact function. Lastly, we propose a potentially experimentally realisable pear-shaped particle model, the non-additive hard pear of revolution (NAHPR) model, which is based on the HPR model but also features non-additive traits similar to those of PHGO particles to mimic their depletion behaviour.
The influence of poor solvent quality on fluid demixing of a model mixture of colloids and nonadsorbing polymers is investigated using density functional theory. The colloidal particles are modelled as hard spheres and the polymer coils as effective interpenetrating spheres that have hard interactions with the colloids. The solvent is modelled as a two-component mixture of a primary solvent, regarded as a background theta-solvent for the polymer, and a cosolvent of point particles that are excluded from both colloids and polymers. Cosolvent exclusion favors overlap of polymers, mimicking the e…
We determine the solvent mediated contribution to the effective potentials for model colloidal or nano- particles dispersed in a binary solvent that exhibits fluid-fluid phase separation. Using a simple density functional theory we calculate the density profiles of both solvent species in the presence of the `colloids', which are treated as external potentials, and determine the solvent mediated (SM) potentials. Specifically, we calculate SM potentials between (i) two colloids, (ii) a colloid and a planar fluid-fluid interface, and (iii) a colloid and a planar wall with an adsorbed wetting fil…
We study the effect of solvent granularity on the effective force between two charged colloidal particles by computer simulations of the primitive model of strongly asymmetric electrolytes with an explicitly added hard sphere solvent. Apart from molecular oscillating forces for nearly touching colloids which arise from solvent and counterion layering, the counterions are attracted towards the colloidal surfaces by solvent depletion providing a simple statistical description of hydration. This, in turn, has an important influence on the effective forces for larger distances which are considerab…
Using mesoscopic numerical simulations and analytical theory we investigate the coarsening of the solvent structure around a colloidal particle emerging after a temperature quench of the colloid surface. Qualitative differences in the coarsening mechanisms are found, depending on the composition of the binary liquid mixture forming the solvent and on the adsorption preferences of the colloid. For an adsorptionwise neutral colloid, as function of time the phase being next to its surface alternates. This behavior sets in on the scale of the relaxation time of the solvent and is absent for colloi…
The role of particle shape in self-assembly processes is a double-edged sword. On the one hand, particle shape and particle elongation are often considered the most fundamental determinants of soft matter structure formation. On the other hand, structure formation is often highly sensitive to details of shape. Here we address the question of particle shape sensitivity for the self-assembly of hard pear-shaped particles, by studying two models for this system: a) the pear hard Gaussian overlap (PHGO) and b) hard pears of revolution (HPR) model. Hard pear-shaped particles, given by the PHGO mode…
We present a numerical study of the effective potential $V_\mathrm{eff}$ between two hard-sphere colloids dispersed in a solvent of interacting particles, for several values of temperature and solvent density, approaching the solvent gas-liquid critical point. We investigate the stability of a system of particles interacting via $V_\mathrm{eff}$ to evaluate the locus of colloidal aggregation in the solvent phase-diagram, and its dependence on the colloid size. We assess how the excluded volume depletion forces are modified by solvent attraction and discuss under which conditions solvent critic…
We study the phase behavior of colloidal suspensions the solvents of which are considered to be binary liquid mixtures undergoing phase segregation. We focus on the thermodynamic region close to the critical point of the accompanying miscibility gap. There, due to the colloidal particles acting as cavities in the critical medium, the spatial confinements of the critical fluctuations of the corresponding order parameter result in the effective, so-called critical Casimir forces between the colloids. Employing an approach in terms of effective, one-component colloidal systems, we explore the pos…
Using numerical simulations, we study the non-equilibrium coarsening dynamics of a binary solvent around spherical colloids in the presence of a temperature gradient. The coarsening dynamics following a temperature quench is studied by solving the coupled modified Cahn-Hilliard-Cook equation and the heat diffusion equation, which describe the concentration profile and the temperature field, respectively. For the temperature field we apply a suitable boundary condition. We observe the formation of circular layers of different phases around the colloid whereas away from the colloid patterns of s…
We determine the phase diagram of mixtures of spherical colloids and neutral nonadsorbing polymers in the thermal crossover region between the $θ$ point and the good-solvent regime. We use the generalized free-volume theory (GFVT), which turns out to be quite accurate as long as $q = R_g/R_c\lesssim 1$ ($R_g$ is the radius of gyration of the polymer and $R_c$ is the colloid radius). Close to the $θ$ point the phase diagram is not very sensitive to solvent quality, while, close to the good-solvent region, changes of the solvent quality modify significantly the position of the critical point and…
We consider an ensemble of spherical colloidal particles immersed in a near-critical solvent such as a binary liquid mixture close to its critical demixing point. The emerging long-ranged fluctuations of the corresponding order parameter of the solvent drive the divergence of the correlation length. Spatial confinements of these critical fluctuations by colloidal solute particles, acting as cavities in the fluctuating medium, restrict and modify the fluctuation spectrum in a way which depends on their relative configuration. This results in effective, so-called critical Casimir forces (CCFs) a…
Within mean field theory, we investigate the bridging transition between a pair of parallel cylindrical colloids immersed in a binary liquid mixture as a solvent which is close to its critical consolute point $T_c$. We determine the universal scaling functions of the effective potential and of the force between the colloids. For a solvent which is at the critical concentration and close to $T_c$, we find that the critical Casimir force is the dominant interaction at close separations. This agrees very well with the corresponding Derjaguin approximation for the effective interaction between the…
We consider a simplified coarse-grained model for colloid-polymer mixtures, in which polymers are represented as monoatomic molecules interacting by means of pair potentials. We use it to study polymer-colloid segregation in the presence of a quenched matrix of colloidal hard spheres. We fix the polymer-to-colloid size ratio to 0.8 and consider matrices such that the fraction f of the volume that is not accessible to the colloids due to the matrix is equal to 40%. As in the Asakura-Oosawa-Vrij (AOV) case, we find that binodal curves in the polymer and colloid volume-fraction plane have a small…
A new method is presented for mesoscopic simulations of particle dispersions in liquid crystal solvents. It allows efficient first-principle simulations of the dispersions involving many particles with many-body interactions mediated by the solvents. Demonstrations have been performed for the aggregation of colloid dispersions in two-dimensional nematic and smectic-C* solvents neglecting hydrodynamic effects, which will be taken into account in the near future.
We study the phenomenon of self-assembly of silica micro-spheres on a glass plate during evaporation of the solvent from a colloidal suspension. Our experiments unveil an interesting competition between ordering and compaction in a strongly driven, out of equilibrium system arising from a slowing down of dynamics due to an impending glass transition. A suitable choice of experimental conditions minimizing the influence of many other competing phenomena that usually complicate probing of this underlying physics is crucial for our study. A re-entrant behavior in the order-disorder phase diagram …
While the important role of electrostatic interactions in aqueous colloidal suspensions is widely known and reasonably well-understood, the relevance of charge in nonpolar suspensions remains mysterious. We demonstrate that particles can have surprisingly strong electrostatic interactions in low dielectric constant environments when ions are solubilized by reverse micelles. A simple thermodynamic model, relating the structure of the micelles to the equilibrium ionic strength, is in good agreement with both conductivity and interaction measurements. Since dissociated ions are solubilized by rev…
If colloidal solute particles are suspended in a solvent close to its critical point, they act as cavities in a fluctuating medium and thereby restrict and modify the fluctuation spectrum in a way which depends on their relative configuration. As a result effective, so-called critical Casimir forces (CCFs) emerge between the colloids. The range and the amplitude of CCFs depend sensitively on the temperature and the composition of the solvent as well as on the boundary conditions of the order parameter of the solvent at the particle surfaces. These remarkable, moreover universal features of the…
Binary colloidal mixtures in near-critical binary solvents
Institute of Physical Chemistry, Polish Academy of Sciences（波兰科学院物理化学研究所）；H. H. Wills Physics Laboratory, University of Bristol（布里斯托大学H.H.威尔斯物理实验室）；Max-Planck-Institut für Intelligente Systeme（马克斯·普朗克智能系统研究所）
We study the non-equilibrium coarsening dynamics of a binary liquid solvent around a colloidal particle in a presence of a time-dependent temperature gradient that emerges after temperature quench of a suitably coated colloid surface. The solvent is maintained at its critical concentration and the colloid is fixed in space. The coarsening patterns near the surface are shown to be strongly dependent on the colloid surface adsorption properties and on the temperature evolution. The temperature gradient alters the morphology of a binary solvent near the surface of a colloid as compared to the coa…
We report a numerical investigation of two colloids immersed in a critical solvent, with the aim of quantifying the effective colloid-colloid interaction potential. By turning on an attraction between the colloid and the solvent particles we follow the evolution from the case in which the solvent density close to the colloids changes from values smaller than the bulk to values larger than the bulk. We thus effectively implement the so-called $(+,+)$ and $(-,-)$ boundary conditions defined in field theoretical approaches focused on the description of critical Casimir forces. We find that the ef…
We calculate the ion and composition distributions around colloid particles in an aqueous mixture, accounting for preferential adsorption, electrostatic interaction, selective solvation among ions and polar molecules, and composition-dependent ionization. On the colloid surface, we predict a precipitation transition induced by strong preference of hydrophilic ions to water and a prewetting transition between weak and strong adsorption and ionization. These transition lines extend far from the solvent coexistence curve in the plane of the interaction parameter χ(or the temperature) and the aver…
We show how to implement stick boundary conditions for a spherical colloid in a solvent that is coarse-grained by the method of stochastic rotation dynamics. This allows us to measure colloidal rotational velocity auto-correlation functions by direct computer simulation. We find quantitative agreement with Enskog theory for short times and with hydrodynamic mode-coupling theory for longer times. For aqueous colloidal suspensions, the Enskog contribution to the rotational friction is larger than the hydrodynamic one when the colloidal radius drops below 35nm.
Composite colloidal assembly by critical Casimir forces
University of Amsterdam（阿姆斯特丹大学）；Wageningen University and Research（瓦赫宁根大学和研究机构）；Polish Academy of Sciences（波兰科学院）；Max-Planck-Institut für Intelligente Systeme（马克斯·普朗克智能系统研究所）
As first explained by the classic Asakura-Oosawa (AO) model, effective attractive forces between colloidal particles induced by depletion of nonadsorbing polymers can drive demixing of colloid-polymer mixtures into colloid-rich and colloid-poor phases, with practical relevance for purification of water, stability of foods and pharmaceuticals, and macromolecular crowding in biological cells. By idealizing polymer coils as effective penetrable spheres, the AO model qualitatively captures the influence of polymer depletion on thermodynamic phase behavior of colloidal suspensions. In previous work…
The liquid-liquid phase separation of a binary solvent can be arrested by colloidal particles trapped at the interface [K. Stratford et al., Science 309, 5744 (2005)]. We show experimentally that the colloidal network so formed can remain stable after fully remixing the liquids, creating a new type of gel in which colloids in a single-phase solvent have locally planar coordination. We argue that this structure is likely maintained by primary-minimum DLVO bonding of our charged colloids, created under strong compression by capillary forces. We present simulation evidence that the combination of…
A coarse-graining strategy, previously developed for polymer solutions, is extended here to mixtures of linear polymers and hard-sphere colloids. In this approach groups of monomers are mapped onto a single pseudoatom (a blob) and the effective blob-blob interactions are obtained by requiring the model to reproduce some large-scale structural properties in the zero-density limit. We show that an accurate parametrization of the polymer-colloid interactions is obtained by simply introducing pair potentials between blobs and colloids. For the coarse-grained model in which polymers are modelled as…
The surface tension, the adsorption, and the depletion thickness of polymers close to a single nonadsorbing colloidal sphere are computed by means of Monte Carlo simulations. We consider polymers under good-solvent conditions and in the thermal crossover region between good-solvent and $θ$ behavior. In the dilute regime we consider a wide range of values of $q$, from $q = 0$ (planar surface) up to $q\approx 30$-50, while in the semidilute regime, for $ρ_p/ρ_p^*\le 4$ ($ρ_p$ is the polymer concentration and $ρ_p^*$ is its value at overlap), we only consider $q = 0,0.5,1$ and 2. The results are …
We analyze the depletion interaction between two hard colloids in a hard--sphere solvent and pay special attention to the limit of large size ratio between colloids and solvent particles which is governed by the well--known Derjaguin approximation. For separations between the colloids of less than the diameter of the solvent particles (defining the depletion region), the solvent structure between the colloids can be analyzed in terms of an effective two--dimensional gas. Thereby we find that the Derjaguin limit is approached more slowly than previously thought. This analysis is in good agreeme…
We study theoretically and experimentally the solvent-mediated critical Casimir force acting on colloidal particles immersed in a binary liquid mixture of water and 2,6-lutidine and close to substrates which are chemically patterned with periodically alternating stripes of antagonistic adsorption preferences. These patterns are experimentally realized via microcontact printing. Upon approaching the critical demixing point of the solvent, normal and lateral critical Casimir forces generate laterally confining effective potentials for the colloids. We analyze in detail the rich behavior of the s…
The growing interest in the dynamical properties of colloidal suspensions, both in equilibrium and under an external drive such as shear or pressure flow, requires the development of accurate methods to correctly include hydrodynamic effects due to the suspension in a solvent. In the present work, we generalize Multi-Particle Collision Dynamics (MPCD) to be able to deal with soft, polymeric colloids. Our methods build on the knowledge of the monomer density profile that can be obtained from monomer-resolved simulations without hydrodynamics or from theoretical arguments. We hereby propose two …
We show how the Smoluchowski dynamics of a colloidal Brownian particle suspended in a molecular solvent can be reached starting from the microscopic Liouvillian evolution of the full classical model in the high friction limit. The integration of the solvent degrees of freedom goes through a multiple time scale perturbation expansion which removes the secular divergences. A simple dynamical Monte Carlo scheme is then proposed to solve the resulting evolution equation for the colloid solute particle. In particular we study the approach to the equilibrium Boltzmann distribution at late times and …
A general class of nonadditive sticky-hard-sphere binary mixtures, where small and large spheres represent the solvent and the solute, respectively, is introduced. The solute-solute and solvent-solvent interactions are of hard-sphere type, while the solute-solvent interactions are of sticky-hard-sphere type with tunable degrees of size nonadditivity and stickiness. Two particular and complementary limits are studied using analytical and semi-analytical tools. The first case is characterized by zero nonadditivity, lending itself to a Percus-Yevick approximate solution from which the impact of s…
We study self-diffusion and sedimentation in colloidal suspensions of nearly-hard spheres using the multiparticle collision dynamics simulation method for the solvent with a discrete mesh model for the colloidal particles (MD+MPCD). We cover colloid volume fractions from 0.01 to 0.40 and compare the MD+MPCD simulations to Brownian dynamics simulations with free-draining hydrodynamics (BD) as well as pairwise far-field hydrodynamics described using the Rotne--Prager--Yamakawa mobility tensor (BD+RPY). The dynamics in MD+MPCD suggest that the colloidal particles are only partially coupled to the…
The physical behaviour of anisotropic charged colloids is determined by their material dielectric anisotropy, affecting colloidal self-assembly, biological function and even out-of-equilibrium behaviour. However, little is known about anisotropic electrostatic screening, which underlies all electrostatic effective interactions in such soft or biological materials. In this work, we demonstrate anisotropic electrostatic screening for charged colloidal particles in a nematic electrolyte. We show that material anisotropy behaves markedly different from particle anisotropy: The electrostatic potent…
The critical Casimir effect provides a thermodynamic analogue of the well-known quantum mechanical Casimir effect. It acts between two surfaces immersed in a critical binary liquid mixture, and results from the confinement of concentration fluctuations of the solvent. Unlike the quantum mechanical effect, the magnitude and range of this attraction can be adjusted with temperature via the solvent correlation length, thus offering new opportunities for the assembly of nano and micron-scale structures. Here, we demonstrate the active assembly control of equilibrium phases using critical Casimir f…
We consider a non-spherical colloidal particle immersed in a fluid close to its critical point. The temperature dependence of the corresponding order parameter profile is calculated explicitly. We perform a systematic expansion of the order parameter profile in powers of the local curvatures of the surface of the colloidal particle. This curvature expansion reduces to the short distance expansion of the order parameter profile in the case that the solvent is at the critical composition.
We show how to coarse grain polymers in a good solvent as single particles, interacting with density-independent or density-dependent interactions. These interactions can be between the centres of mass, the mid-points or end-points of the polymers. We also show how to extend these methods to polymers in poor solvents and mixtures of polymers. Treating polymers as soft colloids can greatly speed up the simulation of complex many-polymer systems, including polymer-colloid mixtures.
The RMPCDMD software package performs hybrid Molecular Dynamics simulations, coupling Multiparticle Collision Dynamics to model the solvent and Molecular Dynamics to model suspended colloids, including hydrodynamics, thermal fluctuations, and chemically active solvent particles and catalytic colloids. The main usage of RMPCDMD is the simulation of chemically powered nanomotors, but other setups are considered: colloids in the presence of a thermal gradients or forced flows. RMPCDMD is developed in Fortran 2008 with OpenMP for multithreaded operation and uses the HDF5-based H5MD file format for…
Anisotropic particles oriented in a specific direction can act as artificial atoms and molecules, and their controlled assembly can result in a wide variety of ordered structures. Towards this, we demonstrate the orientation transitions of uncharged peanut-shaped polystyrene colloids, suspended in a non-ionic aprotic polar solvent, near a flat surface whose potential is static or time-varying. The charged surface is coated with an insulating dielectric layer to suppress electric currents. The transition between several orientation states such as random, normal or parallel orientation with resp…
The analysis of the dynamics of tracer particles in a complex bath can provide valuable information about the microscopic behaviour of the bath. In this work, we study the dynamics of a forced tracer in a colloidal bath by means of Langevin dynamics simulations and a theory model within continuum mechanics. In the simulations, the bath is comprised by quasi-hard spheres with a volume fraction of 50% immersed in a featureless quiescent solvent, and the tracer is pulled with a constant small force (within the linear regime). The theoretical analysis is based on the Navier Stokes equation, where …
Long-range hydrodynamics between colloidal particles or fibers is modelled by the Fluid Particle Model. Two methods are considered to impose the fluid boundary conditions at colloidal surfaces. In the first method radial and transverse friction forces between particle and solvent are applied such that the correct friction and torque follows for moving or rotating particles. The force coefficients are calculated analytically and checked by numerical simulation. In the second method a collision rule is used between colloidal particle and solvent particle that imposes the stick boundary condition…
The density profile and surface tension for the interface of phase-separated colloid-polymer mixtures have been studied in the framework of the square gradient approximation for both ideal and interacting polymers in good solvent. The calculations show that in the presence of polymer-polymer excluded volume interactions the interfaces have lower widths and surface tensions compared to the case of ideal polymers. These results are a direct consequence of the shorter range and smaller depth of the depletion potential between colloidal particles induced by interacting polymers.
Stable colloidal dispersions with evenly distributed particles are important for many technological applications. Due to Brownian motion colloidal particles have constant collisions with each other which often lead to their aggregation driven by the long range van der Waals attraction. As a result the colloidal systems often tend to precipitate. A number of methods have been devised to minimize the effect of long-range van der Waals attraction between colloidal particles or to override the influence of the attraction in order to provide the colloidal stability.In the PhD thesis we investigated…
A mesoscopic hydrodynamic model to simulate synthetic self-propelled Janus particles which is thermophoretically or diffusiophoretically driven is here developed. We first propose a model for a passive colloidal sphere which reproduces the correct rotational dynamics together with strong phoretic effect. This colloid solution model employs a multiparticle collision dynamics description of the solvent, and combines potential interactions with the solvent, with stick boundary conditions. Asymmetric and specific colloidal surface is introduced to produce the properties of self-phoretic Janus part…
A colloidal particle placed in an inhomogeneous solution of smaller non-adsorbing polymers will move towards regions of lower polymer concentration, in order to reduce the free energy of the interface between the surface of the particle and the solution. This phenomenon is known as diffusiophoresis. Treating the polymer as penetrable hard spheres, as in the Asakura-Oosawa model, a simple analytic expression for the diffusiophoretic drift velocity can be obtained. In the context of drying films we show that diffusiophoresis by this mechanism can lead to stratification under easily accessible ex…
We investigate the hydrodynamic properties of a fluid simulated with a mesoscopic solvent model. Two distinct regimes are identified, the `particle regime' in which the dynamics is gas-like, and the `collective regime' where the dynamics is fluid-like. This behavior can be characterized by the Schmidt number, which measures the ratio between viscous and diffusive transport. Analytical expressions for the tracer diffusion coefficient, which have been derived on the basis of a molecular-chaos assumption, are found to describe the simulation data very well in the particle regime, but important de…
We extend Van't Hoff's law for the osmotic pressure to a suspension of active Brownian particles. The propelled particles exert a net reaction force on the solvent, and thereby either drive a measurable solvent flow from the connecting solvent reservoir through the semipermeable membrane, or increase the osmotic pressure and cause the suspension to rise to heights as large as micrometers for experimentally realized microswimmers described in the literature. The increase in osmotic pressure is caused by the background solvent being, in contrast to passive suspensions, no longer at the chemical …
A mixture of solvent particles with short-range, directional interactions and solute particles with short-range, isotropic interactions that can bond multiple times is of fundamental interest in understanding liquids and colloidal mixtures. Because of multi-body correlations predicting the structure and thermodynamics of such systems remains a challenge. Earlier Marshall and Chapman developed a theory wherein association effects due to interactions multiply the partition function for clustering of particles in a reference hard-sphere system. The multi-body effects are incorporated in the clust…
We demonstrate a novel route of spatially organizing the colloid arrangements on the polymer-grafted substrate by use of self-consistent field and density functional theories. We find that grafting of polymers onto a substrate can effectively control spatial dispersions of deposited colloids as a result of the balance between colloidal settling force and entropically elastic force of brushes, and colloids can form unexpected ordered structures on a grafting substrate. The depositing process of colloidal particles onto the elastic "soft" substrate includes two steps: brush-mediated one-dimensio…
We use thermodynamic perturbation theory to calculate the free energies and resulting phase diagrams of binary systems of spherical colloidal particles and interacting polymer coils in good solvent within an effective one-component representation of such mixtures, whereby the colloidal particles interact via a polymer-induced depletion potential. MC simulations are used to test the convergence of the high temperature expansion of the free energy. The phase diagrams calculated for several polymer to colloid size ratios differ considerably from the results of similar calculations for mixtures of…
We study the response of single nanosized spherical colloids in electrolyte solution to an alternating electric field (AC field) by computer simulations. We use a coarse-grained mesoscopic simulation approach that accounts in full for hydrodynamic and electrostatic interactions as well as for thermal fluctuations. The solvent is modeled as a fluid of single Dissipative Particle Dynamics (DPD) beads, and the colloidal particle is modeled as a rigid body made of DPD beads. We compute the mobility and the polarizability of a single colloid and investigate systematically the effect of amplitude an…
Using monomer-resolved Molecular Dynamics simulations and theoretical arguments based on the radial dependence of the osmotic pressure in the interior of a star, we systematically investigate the effective interactions between hard, colloidal particles and star polymers in a good solvent. The relevant parameters are the size ratio q between the stars and the colloids, as well as the number of polymeric arms f (functionality) attached to the common center of the star. By covering a wide range of q's ranging from zero (star against a flat wall) up to about 0.75, we establish analytical forms for…
The association of ions in electrolyte solutions at very low concentration and low temperature is studied using computer simulations and quasi-chemical ion-pairing theory. The specific case of the restricted primitive model (charged hard spheres) is considered. Specialised simulation techniques are employed that lead to efficient sampling of the arrangements and distributions of clusters and free ions, even at conditions corresponding to nanomolar solutions of simple salts in solvents with dielectric constants in the range 5-10, as used in recent experimental work on charged-colloid sus- pensi…
Many low-density nanoparticles show a radial inner structure. This work proposes a novel approach to contrast variation with SAXS based on the constitution of a solvent density gradient in a glass capillary in order to resolve this internal morphology. Scattering curves of a polymeric core-shell colloid were recorded at different suspending medium contrasts at the four-crystal monochromator beamline of PTB at the synchrotron radiation facility BESSY II. The mean size and size distribution of the particles as well as an insight into the colloid electron density composition were determined using…
Dynamic density functional theory (DDFT) is a promising approach for predicting the structural evolution of a drying suspension containing one or more types of colloidal particles. The assumed free-energy functional is a key component of DDFT that dictates the thermodynamics of the model and, in turn, the density flux due to a concentration gradient. In this work, we compare several commonly used free-energy functionals for drying hard-sphere suspensions including local-density approximations based on the ideal-gas, virial, and Boublík-Mansoori-Carnahan-Starling-Leland (BMCSL) equations of sta…
