We investigate the resonant enhancement of nonlinear interactions in a three-mode cavity optomechanical system with two mechanical oscillators. By using the Keldysh Green's function technique we find that nonlinear effects on the cavity density of states can be greatly enhanced by the resonant scattering of two phononic polaritons, due to their small effective dissipation. In the large detuning limit and taking into account an upper bound on the achievable dressed coupling, the optimal point for probing the nonlinear effect is obtained, showing that such three-mode system can exhibit prominent nonlinear features also for relatively small values of $g/κ$.
We study the photon statistics of a cavity linearly coupled to an optomechanical system via second order correlation functions. Our calculations show that the cavity can exhibit strong photon antibunching even when optomechanical interaction in the optomechanical system is weak. The cooperation between the weak optomechanical interaction and the destructive interference between different paths for two-photon excitation leads to the efficient antibunching effect. Compared with the standard optomechanical system, the coupling between a cavity and an optomechanical system provides a method to rel…
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We theoretically propose a scheme to realize an all-optically controlled quantum optomechanical transistor based on a cavity-optomechanical system, where the cavity photons interfere with the input signal photons while the pump field controls the transmission spectrum of the signal laser. Theoretical analysis shows such a quantum optomechanical transistor can be switched on or off by turning on or off the pump laser, which corresponds to amplification or attenuation of the signal laser, respectively. The results further demonstrate that the output signal gain is enhanced abruptly with increasi…
We propose a scheme that can generate a tunable double optomechanically induced transparency (OMIT) in a hybrid optomechanical cavity system, in which the mechanical resonator of an optomechanical cavity is coupled to an additional mechanical resonator, and the additional mechanical resonator can be driven by a weak external coherently mechanical driving field. We show that both the intensity and the phase of the the external mechanical driving field can control the propagation of the probe field, including changing the transmission spectrum curve from a double-window to a single-window. Our s…
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a N-cavity optomechanical system doped with a pair of Rydberg atoms with the presence of a strong pump field and a weak probe field applied to the Nth cavity. 2N-1(N<10) number OMIT windows can be observed in the output field when N cavities coupled with N mechanical oscillators, respectively. But, the mechanical oscillators coupled with different even-odd label cavities lead to different effect on OMIT. On the other hand, two additional transparent windows (extra resonances) are presented, if two Rydbe…
The rigorous resource framework of quantum coherence has been set up recently and excited a wide variety of interests. Here we show that a quantum cavity optomechanical system, as an emerging platform, can behave with a certain value of quantum coherence at a macroscopic scale. We also find that the difference between the total optomechanical coherence and the sum of the optical and the mechanical coherence just equals their mutual information. Motivated by the detection of the optomechanical entanglement, an experimentally feasible scheme to probe the optomechanical coherence is proposed.
We study the physical properties of double-cavity optomechanical system in which the mechanical resonator interacts with one of the coupled cavities and another cavity is used as an auxiliary cavity. The model can be expected to achieve the strong optomechanical coupling strength and overcome the optomechanical cavity decay, simultaneously. Through the coherent auxiliary cavity interferences, the steady-state squeezing of mechanical resonator can be generated in highly unresolved sideband regime. The validity of the scheme is assessed by numerical simulation and theoretical analysis of the ste…
Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We …
A cavity optomechanical system is initiated by a radiation pressure of a cavity field onto a mirror element acting as a quantum resonator. This radiation pressure can control the thermodynamic character of the mirror to some extent, such as cooling its effective temperature. Here we show that by properly engineering the spectral density of a thermal heat bath that interacts with a quantum system, the evolution of the quantum system can be effectively turned on and off. Inside a cavity optomechanical system, when the heat bath is realized by a multi-mode oscillator modeling of the mirror, this …
We analytically study the optomechanically induced transparency (OMIT) in the $N$-cavity system with the \textit{N}th cavity driven by pump, probing laser fields and the \textit{1}st cavity coupled to mechanical oscillator. We also consider that one atom could be trapped in the \textit{i}th cavity. Instead of only illustrating the OMIT in such a system, we are interested in how the number of OMIT windows is influenced by the cavities and the atom and what roles the atom could play in different cavities. In the resolved sideband regime, we find that, the number of cavities precisely determines …
Cavity Optomechanical system is speedily approaching the regime where the radiation pressure of a single photon displaces the moving mirror. In this paper, we consider a cavity optomechanical system where the cavity field is driven by an external field. In the limit of weak mirror-cavity couplings, we calculate analytically the reflection and transmission rates for cavity field and discuss the effects of mirror-cavity coupling on the reflection and transmission.
We analyze a cavity optomechanical setup, in which position of an oscillator modulates optical loss. We show that in such setup quantum limited position measurements can be performed if the external cavity coupling rate matches the optical loss rate, a condition known as "critical coupling". Additionally, under this condition the setup exhibits a number of potential benefits for practical operation including the complete absence of dynamical backaction, and hence optomechanical instability, and rejection of classical laser noise and thermal fluctuations of cavity frequency from the measurement…
The synchronization of the motion of microresonators has attracted considerable attention. Here we present theoretical methods to synchronize the chaotic motion of two optical cavity modes in an optomechanical system, in which one of the optical modes is strongly driven into chaotic motion and is coupled to another weakly-driven optical mode mediated by a mechanical resonator. In these optomechanical systems, we can obtain both complete and phase synchronization of the optical cavity modes in chaotic motion, starting from different initial states. We find that complete synchronization of chaos…
We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimation error. We apply this method for estimating the mechanical state, as well as optomechanical correlations both in the weak and strong coupling regime. The application of the Kalman filter is an import…
We investigate the optical behavior of a single Laguerre-Gaussian cavity optomechanical system consisting of two mechanically rotating mirrors. We explore the effects of various physical parameters on the double optomechanically induced transparency (OMIT) of the system and provide a detailed explanation of the underlying physical mechanism. We show that the momentum is not the cause of the current double-OMIT phenomena; rather, it results from the orbital angular momentum between the optical field and the rotating mirrors. Additionally, the double-OMIT is simply produced using a single Laguer…
We show how stationary entanglement between an optical cavity field mode and a macroscopic vibrating mirror can be generated by means of radiation pressure. We also show how the generated optomechanical entanglement can be quantified and we suggest an experimental readout-scheme to fully characterize the entangled state. Surprisingly, such optomechanical entanglement is shown to persist for environment temperatures above 20K using state-of-the-art experimental parameters.
We theoretically investigate the optical and mechanical properties of a double cavity optomechanical system with one stationary and two harmonically bound mirrors. We show that it is possible for the mechanical mirrors in this system to posses negative effective mass. Working within the strong coupling and the resolved sideband regime, we show that the displacement of the middle resonator is multistable under certain constrains. We also point to the existence of optomechanically induced absorption (OMIA) and Fano resonance. Owing to the negative effective mass, our scheme can be exploited in t…
We theoretically investigate the real-time emission spectrum of a two-level atom coupled to an optomechanical cavity (OMC). Using quantum trajectory approach we obtain the single-photon time-dependent spectrum in this hybrid system where the influence of a strong atom-cavity coupling and a strong optomechanical interaction are studied. We find a dressed state picture can explain the spectra by predicting the exact peak locations as well as the relative peak heights. In our analysis we also include the effect of mechanical losses (under weak mechanical damping limit) and single-photon loss thro…
We give a theoretical study of a double-cavity system in which a mechanical resonator beam is coupled to two cavity modes on both sides through radiation pressures. The indirect coupling between the cavities via the resonator sets up a correlation in the optomechanical entanglements between the two cavities with the common resonator. This correlation initiates an entanglement transfer from the intracavity photon-phonon entanglements to an intercavity photon-photon entanglement. Using numerical solutions, we show two distinct regimes of the optomechanical system, in which the indirect entanglem…
Nonreciprocal devices are indispensable for building quantum networks and ubiquitous in modern communication technology. Here, we use optomechanical interaction and linearly-coupled interaction to realize optical nonreciprocal transmission in a double-cavity optomechanical system. The scheme relies on the interference between the two interactions. We derive the essential conditions to realize perfect optical nonreciprocity in the system, and analyse the properties of optical nonreciprocal transmission and the output fields from mechanical mode. These results can be used to control optical tran…
A scheme of single-photon multi-port router is put forward by coupling two optomechanical cavities with waveguides. It is shown that the coupled two optomechanical cavities can exhibit photon blockade effect, which is generated from interference of three mode interaction. A single-photon travel along the system is calculated. The results show that the single photon can be controlled in the multi-port system because of the radiation pressure, which should be useful for constructing quantum network.
$\mathcal{PT}$-symmetry-breaking enhanced cavity optomechanical magnetometer is proposed, which is achieved by monitoring the change of intensity of a nonlinear four-wave mixing (FWM) process in a gain-cavity-assisted cavity optomechanical system (COMS). Compared with the traditional single loss COMS, the FWM intensity can be enhanced by two orders of magnitude when the gain-cavity-assisted COMS operates at the $\mathcal{PT}$-symmetry-breaking phase. Meanwhile, the sensitivity of magnetic field sensing can be increased from $10^{-9}$T to $10^{-11}$T. This originally comes from the fact that th…
We propose a novel scheme to simulate Z_2 topological insulators via one-dimensional (1D) cavity optomechanical cells array. The direct mapping between 1D cavity optomechanical cells array and 2D quantum spin Hall (QSH) system can be achieved by using diagonalization and dimensional reduction methods. We show that the topological features of the present model can be captured using a 1D generalized Harper equation with an additional SU(2) guage structure. Interestingly, spin pumping of effective photon-phonon bosons can be naturally derived after scanning the additional periodic parameter, whic…
An optical field inside a Fabry-Perot cavity would exhibit multistability either when an atomic medium, acting as a classical dielectric, is filled into the cavity or when the cavity becomes optomechanical where one reflecting end becomes movable. An external laser is essential in both cases to drive the cavity mode out of the zero equilibrium state. We study the equilibrium states of an atom-filled optomechanical cavity, where the atoms are considered a collective two-level systems as well as an active component that replaces the role of the driving laser. Multistability is found when the ato…
We propose to cool a mechanical resonator close to its ground state via an electromagnetically-induced-transparency- (EIT-) like cooling mechanism in a double-cavity optomechanical system, where an additional cavity couples to the original one in the standard optomechanical system. By choosing optimal parameters such that the cooling process of the mechanical resonator corresponds to the maximum value of the optical fluctuation spectrum and the heating process to the minimum one, the mechanical resonator can be cooled with the final mean phonon number less than that at the absence of the addit…
We propose a scheme that is able to generate the microwave controlled optical double optome-chanical induced transparency (OMIT) in a hybrid piezo-optomechanical cavity system, which a piezoelectric optomechanical crystal AlN-nanobeam resonator is placed in a superconducting microwave cavity, and the AlN-nanobeam resonator can be simultaneously driven by both the optical field via the radiation pressure and the microwave field via the piezoelectric interaction. We show that in the presence of a strong pumped optical field applied to the optomechanical crystal cavity through the optical wavegui…
Quantum squeezing of mechanical resonator is important for studying the macroscopic quantum effects and the precision metrology of weak forces. Here we give a theoretical study of a hybrid atom-optomechanical system in which the steady-state squeezing of the mechanical resonator can be generated via the mechanical nonlinearity and cavity cooling process. The validity of the scheme is assessed by simulating the steady-state variance of the mechanical displacement quadrature numerically. The scheme is robust against dissipation of the optical cavity, and the steady-state squeezing can be effecti…
We study an optomechanical system in which the mechanical motion of a single trapped ion is coupled to a cavity field for the realization of a strongly quantum correlated two-mode system. We show that for large pump intensities the steady state photon number exhibits bistable behaviour. We further analyze the occurrence of normal mode splitting (NMS) due to mixing of the fluctuations of the cavity field and the fluctuations of the ion motion which indicates a coherent energy exchange. We also find that in the parameter regime where NMS exists, the steady state of the system shows continuous va…
Quantum state transfer between cavities is crucial for quantum information processing and quantum computation in optomechanical systems. Here, we present the first scheme for the transitionless intra-cavity quantum state transfer based on transitionless quantum driving (TQD) algorithm in optomechanical systems. We also present a physically feasible system for the TQD process based on largely detuned optomechanical cavity. With the Gaussian time-dependence coupling strengths, our scheme can achieve the perfect quantum state transfer with no undesired transition and reduce the dependence of accu…
We study the coherent dynamics of an excited two-level atom in a vacuum optomechanical cavity and find that the original atom-cavity Rabi oscillation is sinusoidally modulated by the light-mechanics coupling as the Rabi splitting is on resonance with the mechanical mode. We develop an analytic model in a three-dimensional Hilbert subspace to explain this phenomenon and employ numerical simulations of the density-matrix master equation to confirm our analysis. We also show that the modulated Rabi oscillation survives in presence of dissipations and other non-ideal factors.
A theoretical scheme for the realization of the sphere-coherent motional states in an optomechanical cavity in the presence of a two-level atom is proposed. To this end, the analogy between an atom-assisted optomechanical cavity and a laser-driven trapped-ion system is used. This analogy provides us with a theoretical tool to show how sphere-coherent states can be generated for the motional degree of freedom of the macroscopic mechanical oscillator from atom-field-mirror interactions in a multi-mode optomechanical cavity. Some nonclassical properties of the generated state of the mechanical os…
We simulate an optomechanical system via a cavity QED scenario with a movable atom and investigate its application in the tiny mass sensing. We find that the steady-state solution of the system exhibits a multiple stability behavior, which is similar to that in the optomechanical system. We explain this phenomenon by the opto-mechanical interaction term in the effective Hamiltonian. Due to the dressed states formed by the effective coupling between the vibration degree of the atom and the optical mode in the cavity, we observe a narrow transparent window in the output field. We utilize this vi…
The present paper illustrates the realization of an atom-optomechanical system where an atomic ensemble is confined in a ring optomechanical cavity consisting of a fixed mirror and two movable ones. An analysis of the dynamics and the linearization of the equations allows to derive the multimode covariance matrix. Under realistic experimental conditions, we numerically simulate the steady-state bipartite and tripartite continuous variable entanglement using the logarithmic negativity, and analyze the shared entanglement in the multimode system. The introduction of the atomic medium allows to o…
We propose a quantum interference cooling scheme for a nano-mechanical resonator (NAMR) in a hybrid optomechanical system, where the atoms are trapped in an optomechanical cavity, coupling to an additional optical cavity. The absorption of the optomechanical resonator can be modified by quantum interference effects induced by the atom-cavity and cavity-cavity couplings independently. With the employment of the quantum interference, the desired transition for cooling is enhanced, along with the heating suppression due to the undesired transition. As a result, the NAMR vibration can be cooled do…
We propose how to achieve significantly enhanced quantum refrigeration and entanglement by coupling a pumped auxiliary cavity to an optomechanical cavity. We obtain both analytical and numerical results, and find optimal-refrigeration and -entanglement conditions under the auxiliary-cavity-assisted (ACA) mechanism. Our method leads to a giant amplification in the net refrigeration rate, and reveals that the ACA entanglement has a much stronger noise-tolerant ability in comparison with the unassisted case. By appropriately designing the ACA mechanism, an effective mechanical susceptibility can …
Cavity opto-mechanical cooling via radiation pressure dynamical backaction enables ground state cooling of mechanical oscillators, provided the laser exhibits sufficiently low phase noise. Here, we investigate and measure the excess phase noise of widely tunable external cavity diode lasers, which have been used in a range of recent nano-optomechanical experiments, including ground-state cooling. We report significant excess frequency noise, with peak values on the order of 10^7 rad^2 Hz near 3.5 GHz, attributed to the diode lasers' relaxation oscillations. The measurements reveal that even at…
We theoretically analyze the light scattering of an optomechanical cavity which strongly interacts with a single two-level system and couples simultaneously to a mechanical oscillator by radiation forces. The analysis is based on the assumptions that the system is driven at low intensity, and that the mechanical interaction is sufficiently weak, permitting a perturbative treatment. We find quantum interference in the scattering paths, which allows to suppress the Stokes-component of the scattered light. This effect can be exploited to reduce the motional energy of the mechanical oscillator.
In this paper, by invariant-based inverse engineering, we design classical driving fields to transfer quantum fluctuations between two suspended membranes in an optomechanical cavity system. The transfer can be quickly attained through a non-adiabatic evolution path determined by a so-called dynamical invariant. Such an evolution path allows one to optimize the occupancies of the unstable "intermediate" states thus the influence of cavity decays can be suppressed. Numerical simulation demonstrates that a perfect fluctuation transfer between two membranes can be rapidly achieved in one step, an…
We study the nonreciprocal transmission and the fast-slow light effects in a cavity optomechanical system, in which the cavity supports a clockwise and a counter-clockwise circulating optical modes, both the two modes are driven simultaneously by a strong pump field and a weak signal field. We find that when the intrinsic photon loss of the cavity is equal to the external coupling loss of the cavity, the system reveals a nonreciprocal transmission of the signal fields. However, when the intrinsic photon loss is much less than the external coupling loss, the nonreciprocity about the transmissio…
It is well-known that some nonlinear phenomena such as strong photon blockade are hard to be observed in optomechanical system with current experimental technology. Here, we present a coherent feedback control strategy in which a linear cavity is coherently controlled by an optomechanical controller in a feedback manner. The coherent feedback loop transfers and enhances quantum nonlinearity from the controller to the controlled cavity, which makes it possible to observe strong nonlinear effects in either linear cavity or optomechanical cavity. More interestingly, we find that the strong photon…
We investigate the routing of a single-photon in a modulated cavity optomechanical system, in which the cavity is driven by a strong coupling field, and the mechanical resonator (MR) is modulated with a weak coherent field. We show that, when there is no a weak coherent field modulating the MR, the system cannot act as a single-photon router, since the signal will be completely covered by the quantum and thermal noises. By introducing the weak coherent field, we can achieve the routing of the single-photon by adjusting the frequency of the weak coherent field, and the system can be immune to t…
A pulsed cooling scheme for optomechanical systems is presented that is capable of cooling at much faster rates, shorter overall cooling times, and for a wider set of experimental scenarios than is possible by conventional methods. The proposed scheme can be implemented for both strongly and weakly coupled optomechanical systems in both weakly and highly dissipative cavities. We study analytically its underlying working mechanism, which is based on interferometric control of optomechanical interactions, and we demonstrate its efficiency with pulse sequences that are obtained by using methods f…
We analyze the performance of optomechanical cooling of a mechanical resonator in the presence of a degenerate optical parametric amplifier within the optomechanical cavity, which squeezes the cavity light. We demonstrate that this allows to significantly enhance the cooling efficiency via the coherent suppression of Stokes scattering. The enhanced cooling occurs also far from the resolved sideband regime, and we show that this cooling scheme can be more efficient than schemes realized by injecting a squeezed field into the optomechanical cavity.
We propose two kinds of distinguishing parameter regimes to induce topological Su-Schrieffer-Heeger (SSH) phase in a one dimensional (1D) multi-resonator cavity optomechanical system via modulating the frequencies of both cavity fields and resonators. The introduction of the frequency modulations allows us to eliminate the Stokes heating process for the mapping of the tight-binding Hamiltonian without usual rotating wave approximation, which is totally different from the traditional mapping of the topological tight-binding model. We find that the tight-binding Hamiltonian can be mapped into a …
We determine the theoretical limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system. The motion of a mechanical resonator is transduced onto quadrature fluctuations of a cavity optical field and a measurement is performed on the optical field exiting the cavity. We compare measurement sensitivities obtained with coherent probing and quantum-enhanced probing of the mechanical motion, i.e. the coherent probe field carries vacuum states and quadrature squeezed vacuum states at sideband frequencies, respectively. We find that quantum-enhanced pr…
We study a hybrid optomechanical system consisting of a Bose-Einstein condensate (BEC) trapped inside a single-mode optical cavity with a moving end-mirror. The intracavity light field has a dual role: it excites a momentum side-mode of the condensate, and acts as a nonlinear spring that couples the vibrating mirror to that collective density excitation. We present the dynamics in a regime where the intracavity optical field, the mirror, and the side-mode excitation all display bistable behavior. In this regime we find that the dynamics of the system exhibits Hamiltonian chaos for appropriate …
We formulate a non-relativistic Hamiltonian in order to describe the interaction between a moving dielectric membrane and radiation pressure. Such a Hamiltonian is derived without making use of the single-mode adiabatic approximation, and hence it enables us to incorporate multi-mode effects in cavity optomechanics. By performing second quantization, we show how a set of generalized Fock states can be constructed to represent quantum states of the membrane and cavity field. In addition, we discuss examples showing how photon scattering among different cavity modes would modify the interaction …
We demonstrate cavity sideband cooling of a single collective motional mode of an atomic ensemble down to a mean phonon occupation number of 2.0(-0.3/+0.9). Both this minimum occupation number and the observed cooling rate are in good agreement with an optomechanical model. The cooling rate constant is proportional to the total photon scattering rate by the ensemble, demonstrating the cooperative character of the light-emission-induced cooling process. We deduce fundamental limits to cavity-cooling either the collective mode or, sympathetically, the single-atom degrees of freedom.
Quantum entanglement not only plays an important role in the study of the fundamentals of quantum theory, but also is considered as a crucial resource in quantum information science. The generation of macroscopic entanglement involving multiple optical and mechanical modes is a desired task in cavity optomechanics. However, the dark-mode effect is a critical obstacle against the generation of quantum entanglement in multimode optomechanical systems consisting of multiple degenerate or near-degenerate mechanical modes coupled to a common cavity mode. Here we propose an auxiliary-cavity-mode met…
We theoretically study a cavity filled with atoms, which provides the optical-mechanical interaction between the modified cavity photonic field and a movable mirror at one end. We show that the cavity field ``dresses'' these atoms, producing two types of polaritons, effectively enhancing the radiation pressure of the cavity field upon the end mirror, as well as establishing an additional squeezing mode of the end mirror. This squeezing produces an adiabatic entanglement, which is absent in usual vacuum cavities, between the oscillating mirror and the rest of the system. We analyze the entangle…
The multiphonon quantum dynamics in laser-pumped cavity optomechanical samples containing a vibrating mirror is investigated. Especially, we focus on dispersive interaction regimes where the externally applied coherent field frequency detuning from the optical resonator frequency is not equal to the mirror's oscillating frequency or to its multiples. As a result, for moderately strong couplings among the involved subsystems, the quantum dynamics of this complex system is described by multiphonon absorption or emission processes, respectively. Particularly, we demonstrate efficient ways to moni…
Photon blockade is an effective way to generate single photon, which is of great significance in quantum state preparation and quantum information processing. Here we investigate the statistical properties of photons in a double-cavity optomechanical system with nonreciprocal coupling, and explore the photon blockade in the weak and strong coupling regions respectively. To achieve the strong photon blockade, we give the optimal parameter relations under different blockade mechanisms. Moreover, we find that the photon blockades under their respective mechanisms exhibit completely different beha…
In this paper, we investigate theoretically the quantum state transfer in a laser driven hybrid optomechanical cavity with two Duffing-like anharmonic movable end mirrors containing an ensemble of identical two-level trapped atoms. The quantum state transfer from the Bogoliubov modes of the two anharmonic oscillators to the atomic mode results in the atomic quadrature squeezing beyond the standard quantum limit of 3 dB which can be controlled by both the optomechanical and atom-field coupling strengths. Interestingly, the generated atomic squeezing can be made robust against the noise sources …
We investigate the dynamics of an optomechanical system where a cavity with a movable mirror involves a degenerate optical parametric amplifier and is driven by a periodically modulated laser field. Our results show that the cooperation between the parametric driving and periodically modulated cavity driving results in a two-fold squeezing on the movable cavity mirror that acts as a mechanical oscillator. This allows the fluctuation of the mechanical oscillator in one quadrature (momentum or position) to be reduced to a level that cannot be reached by solely applying either of these two drivin…
Dual cavity opto-electromechanical systems (OEMS) are those where two electromagnetic cavities are connected by a common mechanical spring. These systems have been shown to facilitate high fidelity quantum state transfer from one cavity to another. In this paper, we explicitly calculate the effect on the fidelity of state transfer, when an additional spring is attached to only one of the cavities. Our quantitative estimates of loss of fidelity, highlight the sensitivity of dual cavity OEMS when it couples to additional mechanical modes. We show that this sensitivity can be used to design an ef…
