Vast volumes of printed documents continue to be used for various important as well as trivial applications. Such applications often rely on the information provided in the form of printed text documents whose integrity verification poses a challenge due to time constraints and lack of resources. Source printer identification provides essential information about the origin and integrity of a printed document in a fast and cost-effective manner. Even when fraudulent documents are identified, information about their origin can help stop future frauds. If a smartphone camera replaces scanner for the document acquisition process, document forensics would be more economical, user-friendly, and even faster in many applications where remote and distributed analysis is beneficial. Building on existing methods, we propose to learn a single CNN model from the fusion of letter images and their printer-specific noise residuals. In the absence of any publicly available dataset, we created a new dataset consisting of 2250 document images of text documents printed by eighteen printers and acquired by a smartphone camera at five acquisition settings. The proposed method achieves 98.42% document classification accuracy using images of letter 'e' under a 5x2 cross-validation approach. Further, when tested using about half a million letters of all types, it achieves 90.33% and 98.01% letter and document classification accuracies, respectively, thus highlighting the ability to learn a discriminative model without dependence on a single letter type. Also, classification accuracies are encouraging under various acquisition settings, including low illumination and change in angle between the document and camera planes.
Norwegian University of Science and Technology (NTNU)（挪威科技大学）；Idiap Research Institute（Idiap研究所）；IDEMIA（IDEMIA公司）
Biometric-based verification is widely employed on the smartphones for various applications, including financial transactions. In this work, we present a new multimodal biometric dataset (face, voice, and periocular) acquired using a smartphone. The new dataset is comprised of 150 subjects that are captured in six different sessions reflecting real-life scenarios of smartphone assisted authentication. One of the unique features of this dataset is that it is collected in four different geographic locations representing a diverse population and ethnicity. Additionally, we also present a multimod…
Smartphones, smartwatches, fitness trackers, and ad-hoc wearable devices are being increasingly used to monitor human activities. Data acquired by the hosted sensors are usually processed by machine-learning-based algorithms to classify human activities. The success of those algorithms mostly depends on the availability of training (labeled) data that, if made publicly available, would allow researchers to make objective comparisons between techniques. Nowadays, publicly available data sets are few, often contain samples from subjects with too similar characteristics, and very often lack of sp…
Norwegian University of Science and Technology (NTNU)（挪威科技大学）
Smartphones have been employed with biometric-based verification systems to provide security in highly sensitive applications. Audio-visual biometrics are getting popular due to their usability, and also it will be challenging to spoof because of their multimodal nature. In this work, we present an audio-visual smartphone dataset captured in five different recent smartphones. This new dataset contains 103 subjects captured in three different sessions considering the different real-world scenarios. Three different languages are acquired in this dataset to include the problem of language depende…
University of Bologna（博洛尼亚大学）；University of Pisa（比萨大学）
On-device training for personalized learning is a challenging research problem. Being able to quickly adapt deep prediction models at the edge is necessary to better suit personal user needs. However, adaptation on the edge poses some questions on both the efficiency and sustainability of the learning process and on the ability to work under shifting data distributions. Indeed, naively fine-tuning a prediction model only on the newly available data results in catastrophic forgetting, a sudden erasure of previously acquired knowledge. In this paper, we detail the implementation and deployment o…
Access to low cost retinal imaging devices in low and middle income countries is limited, compromising progress in preventing needless blindness. The Arclight is a recently developed low-cost solar powered direct ophthalmoscope which can be attached to the camera of a smartphone to acquire retinal images and video. However, the acquired data is inherently limited by the optics of direct ophthalmoscopy, resulting in a narrow field of view with associated corneal reflections, limiting its usefulness. In this work we describe the first fully automatic method utilizing videos acquired using the Ar…
The principle of Photo Response Non Uniformity (PRNU) is often exploited to deduce the identity of the smartphone device whose camera or sensor was used to acquire a certain image. In this work, we design an algorithm that perturbs a face image acquired using a smartphone camera such that (a) sensor-specific details pertaining to the smartphone camera are suppressed (sensor anonymization); (b) the sensor pattern of a different device is incorporated (sensor spoofing); and (c) biometric matching using the perturbed image is not affected (biometric utility). We employ a simple approach utilizing…
In this paper, we consider the problem of detecting counterfeit identity documents in images captured with smartphones. As the number of documents contain special fonts, we study the applicability of convolutional neural networks (CNNs) for detection of the conformance of the fonts used with the ones, corresponding to the government standards. Here, we use multi-task learning to differentiate samples by both fonts and characters and compare the resulting classifier with its analogue trained for binary font classification. We train neural networks for authenticity estimation of the fonts used i…
Skin cancer is one of the most common types of cancer around the world. For this reason, over the past years, different approaches have been proposed to assist detect it. Nonetheless, most of them are based only on dermoscopy images and do not take into account the patient clinical information. In this work, first, we present a new dataset that contains clinical images, acquired from smartphones, and patient clinical information of the skin lesions. Next, we introduce a straightforward approach to combine the clinical data and the images using different well-known deep learning models. These m…
Halmstad University（哈尔姆斯塔德大学）；Norwegian University of Science and Technology（挪威科技大学）；Universidad Autonoma de Madrid（马德里自治大学）
The massive availability of cameras results in a wide variability of imaging conditions, producing large intra-class variations and a significant performance drop if heterogeneous images are compared for person recognition. However, as biometrics is deployed, it is common to replace damaged or obsolete hardware, or to exchange information between heterogeneous applications. Variations in spectral bands can also occur. For example, surveillance face images (typically acquired in the visible spectrum, VIS) may need to be compared against a legacy iris database (typically acquired in near-infrare…
Singapore University of Technology and Design (SUTD)（新加坡科技设计大学）；National Skin Center (NSC)（国家皮肤中心（NSC））；Aaron Tan；Suat-Hoon Tan；NSC（国家皮肤中心（NSC））；SUTD（新加坡科技设计大学）
We investigate the design of an entire mobile imaging system for early detection of melanoma. Different from previous work, we focus on smartphone-captured visible light images. Our design addresses two major challenges. First, images acquired using a smartphone under loosely-controlled environmental conditions may be subject to various distortions, and this makes melanoma detection more difficult. Second, processing performed on a smartphone is subject to stringent computation and memory constraints. In our work, we propose a detection system that is optimized to run entirely on the resource-…
Duke University（杜克大学）；Duke Institute for Health Innovation（杜克健康创新研究所）
We consider machine-learning-based malignancy prediction and lesion identification from clinical dermatological images, which can be indistinctly acquired via smartphone or dermoscopy capture. Additionally, we do not assume that images contain single lesions, thus the framework supports both focal or wide-field images. Specifically, we propose a two-stage approach in which we first identify all lesions present in the image regardless of sub-type or likelihood of malignancy, then it estimates their likelihood of malignancy, and through aggregation, it also generates an image-level likelihood of…
We present a feature-free photogrammetric technique that enables quantitative 3D mesoscopic (mm-scale height variation) imaging with tens-of-micron accuracy from sequences of images acquired by a smartphone at close range (several cm) under freehand motion without additional hardware. Our end-to-end, pixel-intensity-based approach jointly registers and stitches all the images by estimating a coaligned height map, which acts as a pixel-wise radial deformation field that orthorectifies each camera image to allow homographic registration. The height maps themselves are reparameterized as the outp…
This paper summarizes the design, experiments and results of our solution to the Road Damage Detection and Classification Challenge held as part of the 2018 IEEE International Conference On Big Data Cup. Automatic detection and classification of damage in roads is an essential problem for multiple applications like maintenance and autonomous driving. We demonstrate that convolutional neural net based instance detection and classfication approaches can be used to solve this problem. In particular we show that Mask-RCNN, one of the state-of-the-art algorithms for object detection, localization a…
An analysis of data variation and bias in image-based dermatological datasets for machine learning classification
Centro de Informática, Universidade Federal de Pernambuco (UFPE)（伯南布哥联邦大学信息中心）；Ambulatório de Dermatologia, Hospital das Clinicas - UFPE（伯南布哥联邦大学临床医院皮肤科门诊）
University of Catania（卡塔尼亚大学）；National Research Council（国家研究委员会）
Object detection algorithms allow to enable many interesting applications which can be implemented in different devices, such as smartphones and wearable devices. In the context of a cultural site, implementing these algorithms in a wearable device, such as a pair of smart glasses, allow to enable the use of augmented reality (AR) to show extra information about the artworks and enrich the visitors' experience during their tour. However, object detection algorithms require to be trained on many well annotated examples to achieve reasonable results. This brings a major limitation since the anno…
Research on damage detection of road surfaces using image processing techniques has been actively conducted, achieving considerably high detection accuracies. Many studies only focus on the detection of the presence or absence of damage. However, in a real-world scenario, when the road managers from a governing body need to repair such damage, they need to clearly understand the type of damage in order to take effective action. In addition, in many of these previous studies, the researchers acquire their own data using different methods. Hence, there is no uniform road damage dataset available…
Privacy-Aware Detection of Fake Identity Documents: Methodology, Benchmark, and Improved Algorithms (FakeIDet2)
Biometrics and Data Pattern Analytics Lab, Universidad Autónoma de Madrid, Ciudad Universitaria de Cantoblanco, Madrid, 28049, Madrid, Spain（生物特征与数据模式分析实验室，西班牙马德里自治大学坎托布兰科大学城）
Johns Hopkins University（约翰斯·霍普金斯大学）；Technical University of Munich（慕尼黑工业大学）
Stitching images acquired under perspective projective geometry is a relevant topic in computer vision with multiple applications ranging from smartphone panoramas to the construction of digital maps. Image stitching is an equally prominent challenge in medical imaging, where the limited field-of-view captured by single images prohibits holistic analysis of patient anatomy. The barrier that prevents straight-forward mosaicing of 2D images is depth mismatch due to parallax. In this work, we leverage the Fourier slice theorem to aggregate information from multiple transmission images in parallax…
A shallow depth-of-field image keeps the subject in focus, and the foreground and background contexts blurred. This effect requires much larger lens apertures than those of smartphone cameras. Conventional methods acquire RGB-D images and blur image regions based on their depth. However, this approach is not suitable for reflective or transparent surfaces, or finely detailed object silhouettes, where the depth value is inaccurate or ambiguous. We present a learning-based method to synthesize the defocus blur in shallow depth-of-field images from handheld bursts acquired with a single small ape…
Robust and accurate six degree-of-freedom tracking on portable devices remains a challenging problem, especially on small hand-held devices such as smartphones. For improved robustness and accuracy, complementary movement information from an IMU and a camera is often fused. Conventional visual-inertial methods fuse information from IMUs with a sparse cloud of feature points tracked by the device camera. We consider a visually dense approach, where the IMU data is fused with the dense optical flow field estimated from the camera data. Learning-based methods applied to the full image frames can …
University of Florence（佛罗伦萨大学）；PIN Scrl（PIN 斯卡尔公司）
Photo Response Non-Uniformity (PRNU) is considered the most effective trace for the image source attribution task. Its uniqueness ensures that the sensor pattern noises extracted from different cameras are strongly uncorrelated, even when they belong to the same camera model. However, with the advent of computational photography, most recent devices heavily process the acquired pixels, possibly introducing non-unique artifacts that may reduce PRNU noise's distinctiveness, especially when several exemplars of the same device model are involved in the analysis. Considering that PRNU is an image …
University of Zurich（苏黎世大学）；ETH Zürich（苏黎世联邦理工学院）；University College London（伦敦大学学院）；Adobe Research（奥多比研究中心）
Recent years have seen a proliferation of new digital products for the efficient management of indoor spaces, with important applications like emergency management, virtual property showcasing and interior design. These products rely on accurate 3D models of the environments considered, including information on both architectural and non-permanent elements. These models must be created from measured data such as RGB-D images or 3D point clouds, whose capture and consolidation involves lengthy data workflows. This strongly limits the rate at which 3D models can be produced, preventing the adopt…
