Substrate Induced Optical Anisotropy in Monolayer MoS$_2$

Wanfu Shen, Yaxu Wei, Chunguang Hu, C. B. Lopez-Posadas, Michael Hohage, Lidong Sun

英文摘要：

In-plane optical anisotropy has been detected from monolayer MoS$_2$ grown on a-plane (11-20) sapphire substrate in the ultraviolet-visible wavelength range. Based on the measured optical anisotropy, the energy differences between the optical transitions polarized along the ordinary and extraordinary directions of the underlying sapphire substrate have been determined. The results corroborate comprehensively with the dielectric environment induced modification on the electronic band structure and exciton binding energy of monolayer MoS$_2$ predicted recently by first principle calculations. The output of this study proposes the symmetry as a new degree of freedom for dielectric engineering of the two-dimensional materials.

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

阅读原文

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

本文内容

英文摘要相关论文

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

继续探索

相关论文

Modulation of trion and exciton formation in monolayer WS2 by dielectric and substrate engineering

Photoluminescence (PL) of transition metal dichalcogenide (TMD) monolayers is strongly influenced by the dielectric environment. The defect states present in the substrate induces uncontrollable doping in the TMD monolayer and thereby modifies the PL spectra. There have been enormous efforts to tune and overcome the effect of inevitable subtract defects in PL spectra, but a proper understanding and a convenient way are still lacking. Here, we systematically studied the effect of surface defects by gradually increasing the separation between WS2 monolayer and substrate. Hence, we could precisel…

2022-09-23cond-mat.mes-hallcond-mat.mtrl-sciphysics.app-ph

Origin of selective enhancement of sharp defect emission lines in monolayer WSe$_2$ on rough metal substrate

The defect states in atomically thin layers of transition metal dichalcogenides are promising candidates for single photon emission. However, the brightness of such quantum emission is often weak, and is accompanied with undesirable effects like spectral diffusion and strong background emission. By placing a monolayer WSe$_2$ directly on a rough gold substrate, here we show a selective enhancement of sharp defect-bound exciton peaks, coupled with a suppressed spectral diffusion and strong quenching of background luminescence. By combining the experimental data with detailed electromagnetic sim…

2020-03-21cond-mat.mes-hallphysics.app-ph

Thermal boundary conductance of CVD-grown MoS$_2$ monolayer-on-silica substrate determined by scanning thermal microscopy

We characterize heat dissipation of supported molybdenum disulfide (MoS$_2$) monolayers grown by chemical vapor deposition by means of ambient-condition scanning thermal microscopy (SThM). We find that the thermal boundary conductance of the MoS$_2$ monolayers in contact with 300 nm of SiO$_2$ is around 4.6 $\pm$ 2 MW m$^{-2}$ K$^{-1}$. This value is in the low range of the values determined for exfoliated flakes with other techniques such as Raman thermometry, which span an order of magnitude (0.44-50 MW m$^{-2}$ K$^{-1}$), and underlines the dispersion of measurements. The sensitivity to the…

2022-07-29physics.app-ph

通过图案化衬底诱导的非均匀应变增强CVD生长的单层MoS2的迁移率

Mobility enhancement in CVD-grown monolayer MoS2 via patterned substrate induced non-uniform straining

本文研究了周期性纳米结构衬底诱导的非均匀应变对CVD生长单层MoS2光电及输运性质的调控作用，发现应变区域电子密度积累使场效应迁移率提高60倍，并证明可通过改变纳米结构周期性实现宏观可控。

2023-03-07cond-mat.mtrl-sciphysics.app-ph

Ultra-conformable Liquid Metal Particle Monolayer on Air/water Interface for Substrate-free E-tattoo

Gallium-based liquid metal is getting increased attention in conformal flexible electronics for its high electrical conductivity, intrinsic deformability and biocompatibility. A series of flexible devices are developed based on the micro-particles of liquid metal. But it is still challenging to fabricate conformal liquid metal film with a large area and high uniformity. Interfacial self-assembly is a competitive candidate method. Traditional interfacial self-assembly methods have difficulties assembling liquid metal particles because the floating state of the high-density microparticles could …

2023-02-20cs.HCphysics.app-ph

A Universal Strategy of Perovskite Ink-Substrate Interaction to Overcome the Poor Wettability of a Self-Assembled Monolayer for Reproducible Perovskite Solar Cells

Perovskite solar cells employing self assembled monolayers such as Me-4PACz as hole transport layer has been reported to demonstrate high device efficiency. However, the poor perovskite wetting on the Me-4PACz caused by poor perovskite ink interaction with the underlying Me-4PACz presents significant challenges for fabricating efficient perovskite devices. A triple co-solvent system comprising of dimethylformamide (DMF), dimethyl sulfoxide (DMSO) and N-methyl-2-pyrrolidone (NMP) is employed to improve the perovskite ink-substrate interaction and obtain a uniform perovskite layer. In comparison…

2023-02-10cond-mat.mtrl-sciphysics.app-ph

更多相关论文收起更多论文

Ultrafast Laser Ablation, Intrinsic Threshold, and Nanopatterning of Monolayer Molybdenum Disulfide

Laser direct writing is an attractive method for patterning 2D materials without contamination. Literature shows that the femtosecond ablation threshold of graphene across substrates varies by an order of magnitude. Some attribute it to the thermal coupling to the substrates, but it remains by and large an open question. For the first time the effect of substrates on femtosecond ablation of 2D materials is studied using MoS$_{2}$ as an example. We show unambiguously that femtosecond ablation of MoS$_{2}$ is an adiabatic process with negligible heat transfer to the substrates. The observed thre…

2021-11-02physics.app-phphysics.optics

Modifying Hydrophilic Properties of Polyurethane Acryl Paint Substrates by Atomic Layer Deposition and Self-Assembled Monolayers

A process of atomic layer deposition combined with self assembled monolayers was used to investigate the possible modification of polyurethane paint surfaces. First, we used an ALD process to produce thin and uniform Al2O3 coatings of these surfaces at temperatures as low as 40 degrees. We then successfully achieved the addition of 16phosphonohexadecanoic acid SAMs to the Al2O3 coated paint samples. Al2O3 coatings reduced the contact angle of the PUR surfaces from 110 to 10 degrees, accompanied by an initial hydrophobicity which however was not stable. over time. Addition of SAMs on the Al2O3 …

2020-08-04cond-mat.mtrl-sciphysics.app-ph

Halogen-Bond Driven Self-Assembly of Perfluorocarbon Monolayers

The self-assembly of a single layer of organic molecules on a substrate is a powerful strategy to modify surfaces and interfacial properties. The detailed interplay of molecule-to-substrate and molecule-molecule interactions are crucial for the preparation of stable and uniform monomolecular coatings. Thiolates, silanes, phosphonates and carboxylates are widely used head-groups to link organic molecules to specific surfaces study we show that self-assembly of stable and highly compact monolayers of perfluorocarbons. Remarkably, the lowest ever reported surface energy of 2.6 mJ m-2 was measured…

2018-03-15physics.app-phphysics.chem-ph

Direct atomic layer deposition of ultrathin aluminium oxide on monolayer $MoS_2$ exfoliated on gold: the role of the substrate

In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 °C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L) $MoS_2$ membrane exfoliated on gold. Differently than in the case of 1L $MoS_2$ supported by a common insulating substrate ($Al_2O_3/Si$), a better nucleation process of the high-k film was observed on the 1L $MoS_2/Au$ system since the ALD early stages. Atomic force microscopy analyses showed a $\approx 50\%$ $Al_2O_3$ surface coverage just after 10 ALD cycles, its in…

2021-08-21cond-mat.mtrl-sciphysics.app-ph

Stress-transfer from polymer substrates to monolayer and few-layer graphenes

In the present study the stress transfer mechanism in graphene-polymer systems under tension is examined experimentally using the technique of laser Raman microscopy. We discuss in detail the effect of graphene edge geometry, lateral size and thickness which need to be taken under consideration when using graphene as a protective layer. The systems examined comprised of graphene flakes with large length (over ~50 microns) and thickness of one to three layers simply deposited onto PMMA substrates which were then loaded to tension up to ca. 1.60% strain. The stress transfer profiles were found t…

2019-12-10cond-mat.mtrl-sciphysics.app-ph