Dynamic wind farm control is a new strategy that aims to apply time-varying, often periodic, control signals on upstream wind turbines to increase the wake mixing behind the turbine. As a result, wake recovery is accelerated, leading to a higher power production of downstream turbines. As the amount of interest in dynamic control strategies for wind turbines in a wind farm is increasing, different approaches are being proposed. One such novel approach is called Dynamic Individual Pitch Control (DIPC). In DIPC, each blade pitch angle of a turbine is controlled independently to dynamically manipulate the direction of the thrust force vector exerted on the wind. Hence, the direction of the wake is varied, inducing wake mixing without significant thrust force magnitude variations on the rotor. In this paper, the effectiveness of different variations in the thrust direction are evaluated and compared using Large Eddy Simulation (LES) experiments.
Wind farm control using dynamic concepts is a research topic that is receiving an increasing amount of interest. The main concept of this approach is that dynamic variations of the wind turbine control settings lead to higher wake turbulence, and subsequently faster wake recovery due to increased mixing. As a result, downstream turbines experience higher wind speeds, thus increasing their energy capture. The current state of the art in dynamic wind farm control is to vary the magnitude of the thrust force of an upstream turbine. Although very effective, this approach also leads to increased po…
WAKE-NET: A 3D-Wake-Aware Economic Turbine Layout and Cabling Optimization Framework for Multi-Capacity Multi-Hub-Height Wind Farms Serving Grid-Scale and Industrial Power Systems
This work presents a combined feedforward-feedback wake redirection framework for wind farm control. The FLORIS wake model, a control-oriented steady-state wake model is used to calculate optimal yaw angles for a given wind farm layout and atmospheric condition. The optimal yaw angles, which maximize the total power output, are applied to the wind farm. Further, the lidar-based closed-loop wake redirection concept is used to realize a local feedback on turbine level. The wake center is estimated from lidar measurements \unit[3]{D} downwind of the wind turbines. The dynamical feedback controlle…
This paper presents a closed-loop controller for wind farms to provide active power control services using a high-fidelity computational fluid dynamics based wind plant simulator. The proposed design enhances power tracking stability and allows for simple understanding, where each turbine is considered as a pure time-delay system. The paper investigates the control performance with different nominal power distributions in a fully waked condition and limited power availability. Results demonstrate the improvement in power production obtained by closing the control loop, compared to greedy opera…
Wind farm flow control aims to improve wind turbine performance by reducing aerodynamic wake interaction between turbines. Dynamic, physics-based models of wind farm flows have been essential for exploring control strategies such as wake redirection and dynamic induction control. Free vortex methods can provide a computationally efficient way to model wind turbine wake dynamics for control optimisation. We present a control-oriented free-vortex wake model of a 2D and 3D actuator disc to represent wind turbine wakes. The novel derivation of the discrete adjoint equations allows efficient gradie…
Active power control regulates the total power generated by wind farms with the power consumed on the electricity grid. Due to wake effects, the available power is reduced and turbulence is increased at downstream wind turbines. Such effects lead to a design challenge for wind farm control, where the delicate balance between supply and demand should be maintained, while considering the load balancing in the wind turbine structures. We propose a control architecture based on simple feedback controllers that adjusts the demanded power set points of individual wind turbines to compensate for turb…
To provide automatic generation control (AGC) service, wind farms (WFs) are required to control their operation dynamically to track the time-varying power reference. Wake effects impose significant aerodynamic interactions among turbines, which remarkably influence the WF dynamic power production. The nonlinear and high-dimensional nature of dynamic wake model, however, brings extremely high computation complexity and obscure the design of WF controllers. This paper overcomes the control difficulty brought by the dynamic wake model by proposing a novel control-oriented reduced order WF model …
This paper implements a recently developed social hierarchy-based distributed economic model predictive control (DEMPC) algorithm in floating offshore wind farms for the purpose of power maximization. The controller achieves this objective using the concept of yaw and induction-based turbine repositioning (YITuR), which minimizes the overlap areas between adjacent floating wind turbine rotors in real-time to minimize the wake effect. Floating wind farm dynamics and performance are predicted numerically using FOWFSim-Dyn. To ensure fast decision-making by the DEMPC algorithm, feed-forward neura…
Dynamic induction control is a wind farm flow control strategy that utilises wind turbine thrust variations to accelerate breakdown of the aerodynamic wake and improve downstream turbine performance. However, when floating wind turbines are considered, additional dynamics and challenges appear that make optimal control difficult. In this work, we propose an adjoint optimisation framework for non-linear economic model-predictive control, which utilises a novel coupling of an existing aerodynamic wake model to floating platform hydrodynamics. Analysis of the frequency response for the coupled mo…
Due to the fluctuating nature of the wind and the increasing use of wind energy as a power source, wind power will have an increasing negative influence on the stability of the power grid. In this paper, a model predictive control strategy is introduced that not only stabilizes the power produced by wind farms, but also creates the possibility to perform power reference tracking with wind farms. With power reference tracking, it is possible for grid operators to adapt the power production to a change in the power demand and to counteract fluctuations that are introduced by other power generato…
Individual Pitch Control (IPC) is an effective control strategy to mitigate the blade loads on large-scale wind turbines. Since IPC usually requires high pitch actuation, the safety constraints of the pitch actuator should be taken into account when designing the controller. This paper introduces a constrained Subspace Predictive Repetitive Control (SPRC) approach, which considers the limitation of blade pitch angle and pitch rate. To fulfill this goal, a model predictive control scheme is implemented in the fully data-driven SPRC approach to incorporate the physical limitations of the pitch a…
The wake effect is one of the leading causes of energy losses in offshore wind farms (WFs). Both turbine placement and cooperative control can influence the wake interactions inside the WF and thus the overall WF power production. Traditionally, greedy control strategy is assumed in the layout design phase. To exploit the potential synergy between the WF layout and control so that a system-level optimal layout can be obtained with the greatest energy yields, the layout optimization should be performed with cooperative control considerations. For this purpose, a novel two-stage WF layout optimi…
Norwegian University of Science and Technology（挪威科技大学）；Delft University of Technology（代尔夫特理工大学）
This article investigates the optimization of yaw control inputs of a nine-turbine wind farm. The wind farm is simulated using the high-fidelity simulator SOWFA. The optimization is performed with a modifier adaptation scheme based on Gaussian processes. Modifier adaptation corrects for the mismatch between plant and model and helps to converge to the actual plan optimum. In the case study the modifier adaptation approach is compared with the Bayesian optimization approach. Moreover, the use of two different covariance functions in the Gaussian process regression is discussed. Practical recomm…
This paper presents a sensor-less maximum power tracking (MPT) pitch controller for grid connected Wind Turbine (WT). The main advantage of the proposed architecture is that the approach ensures smooth operation and thus minimizes the mechanical stress and damage on the WT during high wind speed and grid transient conditions. Simultaneously, it also: a) reduces transients in Point of Common Coupling (PCC) bus voltage, b) reduces rotor speed oscillations, and c) controls the output power of the wind turbine without exceeding its thermal limits. The approach can work without wind speed measureme…
