The sparse factorization of a large matrix is fundamental in modern statistical learning. In particular, the sparse singular value decomposition and its variants have been utilized in multivariate regression, factor analysis, biclustering, vector time series modeling, among others. The appeal of this factorization is owing to its power in discovering a highly-interpretable latent association network, either between samples and variables or between responses and predictors. However, many existing methods are either ad hoc without a general performance guarantee, or are computationally intensive, rendering them unsuitable for large-scale studies. We formulate the statistical problem as a sparse factor regression and tackle it with a divide-and-conquer approach. In the first stage of division, we consider both sequential and parallel approaches for simplifying the task into a set of co-sparse unit-rank estimation (CURE) problems, and establish the statistical underpinnings of these commonly-adopted and yet poorly understood deflation methods. In the second stage of division, we innovate a contended stagewise learning technique, consisting of a sequence of simple incremental updates, to efficiently trace out the whole solution paths of CURE. Our algorithm has a much lower computational complexity than alternating convex search, and the choice of the step size enables a flexible and principled tradeoff between statistical accuracy and computational efficiency. Our work is among the first to enable stagewise learning for non-convex problems, and the idea can be applicable in many multi-convex problems. Extensive simulation studies and an application in genetics demonstrate the effectiveness and scalability of our approach.
In this article, we advance divide-and-conquer strategies for solving the community detection problem in networks. We propose two algorithms which perform clustering on a number of small subgraphs and finally patches the results into a single clustering. The main advantage of these algorithms is that they bring down significantly the computational cost of traditional algorithms, including spectral clustering, semi-definite programs, modularity based methods, likelihood based methods etc., without losing on accuracy and even improving accuracy at times. These algorithms are also, by nature, par…
Novartis Pharmaceuticals Corp.（诺华制药公司）；New York Institute of Technology（纽约理工学院）；Rutgers University（罗格斯大学）
In the context of big data analysis, the divide-and-conquer methodology refers to a multiple-step process: first splitting a data set into several smaller ones; then analyzing each set separately; finally combining results from each analysis together. This approach is effective in handling large data sets that are unsuitable to be analyzed entirely by a single computer due to limits either from memory storage or computational time. The combined results will provide a statistical inference which is similar to the one from analyzing the entire data set. This article reviews some recently develop…
We propose a novel class of Sequential Monte Carlo (SMC) algorithms, appropriate for inference in probabilistic graphical models. This class of algorithms adopts a divide-and-conquer approach based upon an auxiliary tree-structured decomposition of the model of interest, turning the overall inferential task into a collection of recursively solved sub-problems. The proposed method is applicable to a broad class of probabilistic graphical models, including models with loops. Unlike a standard SMC sampler, the proposed Divide-and-Conquer SMC employs multiple independent populations of weighted pa…
Tsinghua University（清华大学）；The University of Arizona（亚利桑那大学）
The divide-and-conquer method has been widely used for estimating large-scale kernel ridge regression estimates. Unfortunately, when the response variable is highly skewed, the divide-and-conquer kernel ridge regression (dacKRR) may overlook the underrepresented region and result in unacceptable results. We combine a novel response-adaptive partition strategy with the oversampling technique synergistically to overcome the limitation. Through the proposed novel algorithm, we allocate some carefully identified informative observations to multiple nodes (local processors). Although the oversampli…
We present a parallelized bijective graph matching algorithm that leverages seeds and is designed to match very large graphs. Our algorithm combines spectral graph embedding with existing state-of-the-art seeded graph matching procedures. We justify our approach by proving that modestly correlated, large stochastic block model random graphs are correctly matched utilizing very few seeds through our divide-and-conquer procedure. We also demonstrate the effectiveness of our approach in matching very large graphs in simulated and real data examples, showing up to a factor of 8 improvement in runt…
Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）；Inception Institute of Artificial Intelligence（起源人工智能研究院）
Theoretical analysis of the divide-and-conquer based distributed learning with least square loss in the reproducing kernel Hilbert space (RKHS) have recently been explored within the framework of learning theory. However, the studies on learning theory for general loss functions and hypothesis spaces remain limited. To fill the gap, we study the risk performance of distributed empirical risk minimization (ERM) for general loss functions and hypothesis spaces. The main contributions are two-fold. First, we derive two tight risk bounds under certain basic assumptions on the hypothesis space, as …
Divide-and-conquer strategies for Monte Carlo algorithms are an increasingly popular approach to making Bayesian inference scalable to large data sets. In its simplest form, the data are partitioned across multiple computing cores and a separate Markov chain Monte Carlo algorithm on each core targets the associated partial posterior distribution, which we refer to as a sub-posterior, that is the posterior given only the data from the segment of the partition associated with that core. Divide-and-conquer techniques reduce computational, memory and disk bottle-necks, but make it difficult to rec…
Tuning parameter selection is of critical importance for kernel ridge regression. To this date, data driven tuning method for divide-and-conquer kernel ridge regression (d-KRR) has been lacking in the literature, which limits the applicability of d-KRR for large data sets. In this paper, by modifying the Generalized Cross-validation (GCV, Wahba, 1990) score, we propose a distributed Generalized Cross-Validation (dGCV) as a data-driven tool for selecting the tuning parameters in d-KRR. Not only the proposed dGCV is computationally scalable for massive data sets, it is also shown, under mild con…
Courant Institute of Mathematical Sciences（库朗数学科学研究所）；Center for Data Science（数据科学中心）；New York University（纽约大学）
We consider the learning of algorithmic tasks by mere observation of input-output pairs. Rather than studying this as a black-box discrete regression problem with no assumption whatsoever on the input-output mapping, we concentrate on tasks that are amenable to the principle of divide and conquer, and study what are its implications in terms of learning. This principle creates a powerful inductive bias that we leverage with neural architectures that are defined recursively and dynamically, by learning two scale-invariant atomic operations: how to split a given input into smaller sets, and how …
Active learning (AL) repeatedly trains the classifier with the minimum labeling budget to improve the current classification model. The training process is usually supervised by an uncertainty evaluation strategy. However, the uncertainty evaluation always suffers from performance degeneration when the initial labeled set has insufficient labels. To completely eliminate the dependence on the uncertainty evaluation sampling in AL, this paper proposes a divide-and-conquer idea that directly transfers the AL sampling as the geometric sampling over the clusters. By dividing the points of the clust…
Shanghai Jiao Tong University（上海交通大学）；Zhejiang University（浙江大学）；University of Massachusetts Dartmouth（马萨诸塞大学达特茅斯分校）；Cornell University（康奈尔大学）
Divide-and-conquer is a general strategy to deal with large scale problems. It is typically applied to generate ensemble instances, which potentially limits the problem size it can handle. Additionally, the data are often divided by random sampling which may be suboptimal. To address these concerns, we propose the $DC^2$ algorithm. Instead of ensemble instances, we produce structure-preserving signature pieces to be assembled and conquered. $DC^2$ achieves the efficiency of sampling-based large scale kernel methods while enabling parallel multicore or clustered computation. The data partition …
Universal probabilistic programming systems (PPSs) provide a powerful framework for specifying rich probabilistic models. They further attempt to automate the process of drawing inferences from these models, but doing this successfully is severely hampered by the wide range of non--standard models they can express. As a result, although one can specify complex models in a universal PPS, the provided inference engines often fall far short of what is required. In particular, we show that they produce surprisingly unsatisfactory performance for models where the support varies between executions, …
In this paper, a new method is proposed for sparse PCA based on the recursive divide-and-conquer methodology. The main idea is to separate the original sparse PCA problem into a series of much simpler sub-problems, each having a closed-form solution. By recursively solving these sub-problems in an analytical way, an efficient algorithm is constructed to solve the sparse PCA problem. The algorithm only involves simple computations and is thus easy to implement. The proposed method can also be very easily extended to other sparse PCA problems with certain constraints, such as the nonnegative spa…
This paper introduces a divide-and-conquer inspired adversarial learning (DACAL) approach for photo enhancement. The key idea is to decompose the photo enhancement process into hierarchically multiple sub-problems, which can be better conquered from bottom to up. On the top level, we propose a perception-based division to learn additive and multiplicative components, required to translate a low-quality image or video into its high-quality counterpart. On the intermediate level, we use a frequency-based division with generative adversarial network (GAN) to weakly supervise the photo enhancement…
We reduce a broad class of machine learning problems, usually addressed by EM or sampling, to the problem of finding the $k$ extremal rays spanning the conical hull of a data point set. These $k$ "anchors" lead to a global solution and a more interpretable model that can even outperform EM and sampling on generalization error. To find the $k$ anchors, we propose a novel divide-and-conquer learning scheme "DCA" that distributes the problem to $\mathcal O(k\log k)$ same-type sub-problems on different low-D random hyperplanes, each can be solved by any solver. For the 2D sub-problem, we present a…
The deep layers of modern neural networks extract a rather rich set of features as an input propagates through the network. This paper sets out to harvest these rich intermediate representations for quantization with minimal accuracy loss while significantly reducing the memory footprint and compute intensity of the DNN. This paper utilizes knowledge distillation through teacher-student paradigm (Hinton et al., 2015) in a novel setting that exploits the feature extraction capability of DNNs for higher-accuracy quantization. As such, our algorithm logically divides a pretrained full-precision D…
Most applications demand high-performance deep neural architectures costing limited resources. Neural architecture searching is a way of automatically exploring optimal deep neural networks in a given huge search space. However, all sub-networks are usually evaluated using the same criterion; that is, early stopping on a small proportion of the training dataset, which is an inaccurate and highly complex approach. In contrast to conventional methods, here we present a divide-and-conquer (DC) approach to effectively and efficiently search deep neural architectures. Given an arbitrary search spac…
