Gated imaging is an emerging sensor technology for self-driving cars that provides high-contrast images even under adverse weather influence. It has been shown that this technology can even generate high-fidelity dense depth maps with accuracy comparable to scanning LiDAR systems. In this work, we extend the recent Gated2Depth framework with aleatoric uncertainty providing an additional confidence measure for the depth estimates. This confidence can help to filter out uncertain estimations in regions without any illumination. Moreover, we show that training on dense depth maps generated by LiDAR depth completion algorithms can further improve the performance.
Gated cameras hold promise as an alternative to scanning LiDAR sensors with high-resolution 3D depth that is robust to back-scatter in fog, snow, and rain. Instead of sequentially scanning a scene and directly recording depth via the photon time-of-flight, as in pulsed LiDAR sensors, gated imagers encode depth in the relative intensity of a handful of gated slices, captured at megapixel resolution. Although existing methods have shown that it is possible to decode high-resolution depth from such measurements, these methods require synchronized and calibrated LiDAR to supervise the gated depth …
Beihang University（北京航空航天大学）；Peking University（北京大学）；Institute for Infocomm Research（信息通信研究院）
Dense depth completion is essential for autonomous systems and 3D reconstruction. In this paper, a lightweight yet efficient network (S\&CNet) is proposed to obtain a good trade-off between efficiency and accuracy for the dense depth completion. A dual-stream attention module (S\&C enhancer) is introduced to measure both spatial-wise and the channel-wise global-range relationship of extracted features so as to improve the performance. A coarse-to-fine network is designed and the proposed S\&C enhancer is plugged into the coarse estimation network between its encoder and decoder network. Experi…
University of Amsterdam（阿姆斯特丹大学）；DUniversum（3DUniversum）；Google Research（谷歌研究院）
In this paper we address the benefit of adding adversarial training to the task of monocular depth estimation. A model can be trained in a self-supervised setting on stereo pairs of images, where depth (disparities) are an intermediate result in a right-to-left image reconstruction pipeline. For the quality of the image reconstruction and disparity prediction, a combination of different losses is used, including L1 image reconstruction losses and left-right disparity smoothness. These are local pixel-wise losses, while depth prediction requires global consistency. Therefore, we extend the self…
University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）
One of the key elements of reconstructing a 3D mesh from a monocular video is generating every frame's depth map. However, in the application of colonoscopy video reconstruction, producing good-quality depth estimation is challenging. Neural networks can be easily fooled by photometric distractions or fail to capture the complex shape of the colon surface, predicting defective shapes that result in broken meshes. Aiming to fundamentally improve the depth estimation quality for colonoscopy 3D reconstruction, in this work we have designed a set of training losses to deal with the special challen…
GRS-SLAM3R: Real-Time Dense SLAM with Gated Recurrent State
Shanghai Jiao Tong University（上海交通大学）；Institute of Medical Robotics（医疗机器人研究所）；School of Automation and Intelligent Sensing（自动化与智能感知学院）；Key Laboratory of System Control and Information Processing（系统控制与信息处理重点实验室）；Ministry of Education of China（中华人民共和国教育部）
Environment perception for autonomous driving is doomed by the trade-off between range-accuracy and resolution: current sensors that deliver very precise depth information are usually restricted to low resolution because of technology or cost limitations. In this work, we exploit depth information from an active gated imaging system based on cost-sensitive diode and CMOS technology. Learning a mapping between pixel intensities of three gated slices and depth produces a super-resolved depth map image with respectable relative accuracy of 5% in between 25-80 m. By design, depth information is pe…
PLA Strategic Support Force Information Engineering University（中国人民解放军战略支援部队信息工程大学）
We present an efficient multi-view stereo (MVS) network for 3D reconstruction from multiview images. While previous learning based reconstruction approaches performed quite well, most of them estimate depth maps at a fixed resolution using plane sweep volumes with a fixed depth hypothesis at each plane, which requires densely sampled planes for desired accuracy and therefore is difficult to achieve high resolution depth maps. In this paper we introduce a coarseto-fine depth inference strategy to achieve high resolution depth. This strategy estimates the depth map at coarsest level, while the d…
University of Illinois Urbana Champaign（伊利诺伊大学厄巴纳-尚佩恩分校）
We propose an approach for 3D reconstruction and segmentation of a single object placed on a flat surface from an input video. Our approach is to perform dense depth map estimation for multiple views using a proposed objective function that preserves detail. The resulting depth maps are then fused using a proposed implicit surface function that is robust to estimation error, producing a smooth surface reconstruction of the entire scene. Finally, the object is segmented from the remaining scene using a proposed 2D-3D segmentation that incorporates image and depth cues with priors and regulariza…
Depth map fusion is an essential part in both stereo and RGB-D based 3-D reconstruction pipelines. Whether produced with a passive stereo reconstruction or using an active depth sensor, such as Microsoft Kinect, the depth maps have noise and may have poor initial registration. In this paper, we introduce a method which is capable of handling outliers, and especially, even significant registration errors. The proposed method first fuses a sequence of depth maps into a single non-redundant point cloud so that the redundant points are merged together by giving more weight to more certain measurem…
University of Montreal（蒙特利尔大学）；University of Science and Technology（科技大学）
Reconstructing 3D object models is playing an important role in many applications in the field of computer vision. Instead of employing a collection of cameras and/or sensors as in many studies, this paper proposes a simple way to build a cheaper system for 3D reconstruction using only one depth camera and 2 or more mirrors. Each mirror is equivalently considered as a depth camera at another viewpoint. Since all scene data are provided by only one depth sensor, our approach can be applied to moving objects and does not require any synchronization protocol as with a set of cameras. Some experim…
Niantic（Niantic公司）；UCL（伦敦大学学院）；University of Oxford（牛津大学）；Google（谷歌）
Traditionally, 3D indoor scene reconstruction from posed images happens in two phases: per-image depth estimation, followed by depth merging and surface reconstruction. Recently, a family of methods have emerged that perform reconstruction directly in final 3D volumetric feature space. While these methods have shown impressive reconstruction results, they rely on expensive 3D convolutional layers, limiting their application in resource-constrained environments. In this work, we instead go back to the traditional route, and show how focusing on high quality multi-view depth prediction leads to …
This paper presents a new method for 3D depth estimation using the output of an asynchronous time driven image sensor. In association with a high speed Digital Light Processing projection system, our method achieves real-time reconstruction of 3D points cloud, up to several hundreds of hertz. Unlike state of the art methodology, we introduce a method that relies on the use of frequency tagged light pattern that make use of the high temporal resolution of event based sensors. This approch eases matching as each pattern unique frequency allow for any easy matching between displayed patterns and …
Zhejiang University（浙江大学）；City University of Hong Kong（香港城市大学）
Although PIFu-based 3D human reconstruction methods are popular, the quality of recovered details is still unsatisfactory. In a sparse (e.g., 3 RGBD sensors) capture setting, the depth noise is typically amplified in the PIFu representation, resulting in flat facial surfaces and geometry-fallible bodies. In this paper, we propose a novel geometry-aware two-scale PIFu for 3D human reconstruction from sparse, noisy inputs. Our key idea is to exploit the complementary properties of depth denoising and 3D reconstruction, for learning a two-scale PIFu representation to reconstruct high-frequency fa…
NSL-SLAM: High-Fidelity Neural Structured-Light Depth for Practical SLAM and Reconstruction
Wangxuan Institute of Computer Technology, Peking University（北京大学王选计算机研究所）；School of Computer Science and Technology, Beihang University（北京航空航天大学计算机科学与技术学院）；Yuanpei College, Peking University（北京大学元培学院）
FatesGS: Fast and Accurate Sparse-View Surface Reconstruction using Gaussian Splatting with Depth-Feature Consistency
Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University（北京信息科学与技术国家研究中心（BNRist），清华大学）；School of Software, Tsinghua University（清华大学软件学院）
To reconstruct a 3D scene from a set of calibrated views, traditional multi-view stereo techniques rely on two distinct stages: local depth maps computation and global depth maps fusion. Recent studies concentrate on deep neural architectures for depth estimation by using conventional depth fusion method or direct 3D reconstruction network by regressing Truncated Signed Distance Function (TSDF). In this paper, we advocate that replicating the traditional two stages framework with deep neural networks improves both the interpretability and the accuracy of the results. As mentioned, our network …
ETH Zurich（苏黎世联邦理工学院）；University of Amsterdam（阿姆斯特丹大学）；KU Leuven（鲁汶大学）
Monocular depth reconstruction of complex and dynamic scenes is a highly challenging problem. While for rigid scenes learning-based methods have been offering promising results even in unsupervised cases, there exists little to no literature addressing the same for dynamic and deformable scenes. In this work, we present an unsupervised monocular framework for dense depth estimation of dynamic scenes, which jointly reconstructs rigid and non-rigid parts without explicitly modelling the camera motion. Using dense correspondences, we derive a training objective that aims to opportunistically pres…
SurgicalGS: Dynamic 3D Gaussian Splatting for Accurate Robotic-Assisted Surgical Scene Reconstruction
The Hamlyn Centre for Robotic Surgery, Imperial College London（伦敦帝国理工学院哈姆林 robotic外科中心）；Hawkes Institute, University College London（伦敦大学学院霍克斯研究所）；University of Liverpool（利物浦大学）
Perspective-aware fusion of incomplete depth maps and surface normals for accurate 3D reconstruction
Austrian Institute of Technology（奥地利技术研究所）；Center for Vision, Automation and Control（视觉、自动化与控制中心）；Competence unit High-Performance Vision System（高性能视觉系统能力单元）
Washington University in St. Louis（圣路易斯华盛顿大学）；Adobe Research（Adobe研究院）；Argo AI（阿尔戈人工智能公司）；Simon Fraser University（西蒙弗雷泽大学）
This paper proposes a deep neural network (DNN) for piece-wise planar depthmap reconstruction from a single RGB image. While DNNs have brought remarkable progress to single-image depth prediction, piece-wise planar depthmap reconstruction requires a structured geometry representation, and has been a difficult task to master even for DNNs. The proposed end-to-end DNN learns to directly infer a set of plane parameters and corresponding plane segmentation masks from a single RGB image. We have generated more than 50,000 piece-wise planar depthmaps for training and testing from ScanNet, a large-sc…
University of Innsbruck（因斯布鲁克大学）；LEC GmbH（LEC有限公司）；INNIO Jenbacher GmbH & Co OG（INNIO颜巴赫两合公司）
Real-time estimation of actual object depth is an essential module for various autonomous system tasks such as 3D reconstruction, scene understanding and condition assessment. During the last decade of machine learning, extensive deployment of deep learning methods to computer vision tasks has yielded approaches that succeed in achieving realistic depth synthesis out of a simple RGB modality. Most of these models are based on paired RGB-depth data and/or the availability of video sequences and stereo images. The lack of sequences, stereo data and RGB-depth pairs makes depth estimation a fully …
Endo-4DGS: Endoscopic Monocular Scene Reconstruction with 4D Gaussian Splatting
The Chinese University of Hong Kong (CUHK)（香港中文大学）；University College London（伦敦大学学院）；Shun Hing Institute of Advanced Engineering, CUHK（香港中文大学信兴高等工程研究所）；Shenzhen Research Institute, CUHK（香港中文大学深圳研究院）
Imperial College London（伦敦帝国理工学院）；Dyson Technology Ltd.（戴森科技有限公司）
While the keypoint-based maps created by sparse monocular simultaneous localisation and mapping (SLAM) systems are useful for camera tracking, dense 3D reconstructions may be desired for many robotic tasks. Solutions involving depth cameras are limited in range and to indoor spaces, and dense reconstruction systems based on minimising the photometric error between frames are typically poorly constrained and suffer from scale ambiguity. To address these issues, we propose a 3D reconstruction system that leverages the output of a convolutional neural network (CNN) to produce fully dense depth ma…
University of Oulu（奥卢大学）；Aalto University（阿尔托大学）；Tampere University（坦佩雷大学）
Various datasets have been proposed for simultaneous localization and mapping (SLAM) and related problems. Existing datasets often include small environments, have incomplete ground truth, or lack important sensor data, such as depth and infrared images. We propose an easy-to-use framework for acquiring building-scale 3D reconstruction using a consumer depth camera. Unlike complex and expensive acquisition setups, our system enables crowd-sourcing, which can greatly benefit data-hungry algorithms. Compared to similar systems, we utilize raw depth maps for odometry computation and loop closure …
University of Washington（华盛顿大学）；Virginia Tech（弗吉尼亚理工大学）；Facebook（脸书）
We present an algorithm for reconstructing dense, geometrically consistent depth for all pixels in a monocular video. We leverage a conventional structure-from-motion reconstruction to establish geometric constraints on pixels in the video. Unlike the ad-hoc priors in classical reconstruction, we use a learning-based prior, i.e., a convolutional neural network trained for single-image depth estimation. At test time, we fine-tune this network to satisfy the geometric constraints of a particular input video, while retaining its ability to synthesize plausible depth details in parts of the video …
Robert Bosch GmbH（罗伯特·博世有限公司）；Goethe University（歌德大学）
In this paper we present mono-stixels, a compact environment representation specially designed for dynamic street scenes. Mono-stixels are a novel approach to estimate stixels from a monocular camera sequence instead of the traditionally used stereo depth measurements. Our approach jointly infers the depth, motion and semantic information of the dynamic scene as a 1D energy minimization problem based on optical flow estimates, pixel-wise semantic segmentation and camera motion. The optical flow of a stixel is described by a homography. By applying the mono-stixel model the degrees of freedom o…
In-Vivo Skin 3-D Surface Reconstruction and Wrinkle Depth Estimation using Handheld High Resolution Tactile Sensing
Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）；Computer Science, University of Illinois Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校计算机科学系）；Department of Materials Science & Engineering, Carnegie Mellon University（卡内基梅隆大学材料科学与工程系）；Department of Mechanical Engineering, Carnegie Mellon University（卡内基梅隆大学机械工程系）；Department of Electrical and Computer Engineering, Carnegie Mellon University（卡内基梅隆大学电气与计算机工程系）
Sat-DN: Implicit Surface Reconstruction from Multi-View Satellite Images with Depth and Normal Supervision
School of Remote Sensing Information Engineering, Wuhan University（遥感信息工程学院，武汉大学）；State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University（测绘遥感信息工程国家重点实验室，武汉大学）
Harbin Institute of Technology（哈尔滨工业大学）；Peng Cheng Laboratory（鹏城实验室）；Tsinghua University（清华大学）
Depth estimation from a single image is an active research topic in computer vision. The most accurate approaches are based on fully supervised learning models, which rely on a large amount of dense and high-resolution (HR) ground-truth depth maps. However, in practice, color images are usually captured with much higher resolution than depth maps, leading to the resolution-mismatched effect. In this paper, we propose a novel weakly-supervised framework to train a monocular depth estimation network to generate HR depth maps with resolution-mismatched supervision, i.e., the inputs are HR color i…
ShapeGraFormer: GraFormer-Based Network for Hand-Object Reconstruction from a Single Depth Map
German Research Center for Artificial Intelligence (DFKI)（德国人工智能研究中心）；University of Kaiserslautern-Landau (RPTU)（凯泽斯劳滕-兰道大学）；National University of Sciences and Technology (NUST)（国家科技大学）；University of Prince Mugrin (UPM)（穆格林王子大学）
The University of Adelaide（阿德莱德大学）；Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Indian Institute of Technology (BHU)（印度理工学院（贝拿勒斯印度教大学））
Despite learning based methods showing promising results in single view depth estimation and visual odometry, most existing approaches treat the tasks in a supervised manner. Recent approaches to single view depth estimation explore the possibility of learning without full supervision via minimizing photometric error. In this paper, we explore the use of stereo sequences for learning depth and visual odometry. The use of stereo sequences enables the use of both spatial (between left-right pairs) and temporal (forward backward) photometric warp error, and constrains the scene depth and camera m…
