arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2003.03435physics.acc-ph
收藏

在电网上使用三次谐波驱动的高效电感输出管

High-Efficiency Inductive Output Tubes using a 3rd Harmonic Drive on the Grid

H. P. Freund, R. L. Ives, W. Sessions

摘要:

在本文中,我们讨论了使用三次谐波分量的驱动电压的栅极上的电感输出管(IOT)。高效电感输出管(IOT)的典型特征是效率高达70 - 75%。然而,实现超过80%的效率将大大降低下一代加速器的运营成本。为了实现这一目标,我们考虑在电感输出管的栅极上向驱动信号添加三次谐波分量。已经考虑在IOT枪中使用三次谐波驱动组件,以便将这种枪应用为射频直线加速器(RF直线加速器)的注入器[1]。在这里,我们认为IOT将用于提供RF功率以驱动RF直线加速器并施加三次谐波,目的是提高IOT的RF输出的效率。我们考虑一个具有700 MHz谐振腔的模型IOT,并使用电压为30 kV的环形梁,平均电流为6.67 A,产生约1.3e-6 P的导系数。我们使用NEMESIS模拟代码[2]模拟该IOT,该代码已通过与通信和电力工业开发的K5 H90 W-2 IOT进行比较而成功验证。发现当第三谐波的相位相对于基本驱动信号偏移π弧度并且第三谐波功率大于基本驱动功率的约50%时,第三谐波对效率的影响最大。对于本例,我们表明,接近86%的效率是可能的,通过这种方式。

英文摘要:

In this paper, we discuss the use of a 3rd harmonic component to the drive voltage on the grid of an inductive output tube (IOT). High-efficiency inductive output tubes (IOTs) are typically characterized by efficiencies up to 70 - 75%. However, the achievement of efficiencies greater than 80% would substantially reduce the operating costs of next-generation accelerators. In order to achieve this goal, we consider the addition of a 3rd harmonic component to the drive signal on the grid of an inductive output tube. The use of a 3rd harmonic drive component in IOT guns has been considered in order to apply such a gun as the injector [1] of radio frequency linear accelerators (RF linacs). Here we consider that the IOT will be used to provide the rf power to drive RF linacs and apply the 3rd harmonic with the intention of increasing the efficiency of the RF output of the IOT. We consider a model IOT with a 700 MHz resonant cavity and using an annular beam with a voltage of 30 kV, an average current of 6.67 A yielding a perveance of about 1.3e-6 P. We simulate this IOT using the NEMESIS simulation code [2] which has been successfully validated by comparison with the K5H90W-2 IOT developed by Communications and Power Industries. It is found that the effect of the 3rd harmonic on the efficiency is greatest when the phase of the 3rd harmonic is shifted by pi radians with respect to the fundamental drive signal and with 3rd harmonic powers greater than about 50% that of the fundamental drive power. For the present example, we show that efficiencies approaching 86% are possible by this means.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑